# Esford90's CRX Si Build (Second Try) **URL:** \ **Category:** Builds\ **Created:** [September 22, 2010, 11:33pm UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682 "2010-09-22T23:33:55Z")\ **Posts on this page:** 20\ **Page:** 14
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [April 5, 2011, 4:01pm UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/261 "2011-04-05T16:01:14Z")
woah you’re so big n strong ryan 🙂 ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [April 6, 2011, 12:24am UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/262 "2011-04-06T00:24:03Z")
> [@maxwell](#): > > HONDAS BE COMIN BACK! > > Seriously, I like it a lot! Thanks man > [@deebo](#): > > woah you’re so big n strong ryan 🙂 jacks are overrated ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [April 7, 2011, 12:04am UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/263 "2011-04-07T00:04:39Z")
Today was productive. I just got out of the garage and I accomplished installing all of the brake lines and started on the fuel lines. I also put the rear section of the wiring harness in and the gas tank filler neck. I pit the seats in because they have been sitting in my closet for 5 months and I wanted to sit in them lol. I only took a couple pictures of the brake lines earlier today but haven’t taken any of what I did tonight. I will post some more tomorrow. Here is where the brake line will enter the inside of the car ![http://i860.photobucket.com/albums/ab163/esford90/IMAG0542.jpg](http://i860.photobucket.com/albums/ab163/esford90/IMAG0542.jpg) And the rest ![http://i860.photobucket.com/albums/ab163/esford90/IMAG0543.jpg](http://i860.photobucket.com/albums/ab163/esford90/IMAG0543.jpg) No I am not done with the fuel lines yet and yes they look a little funky but I’m changing where it comes out into the engine bay so all I had was 2 90 degree fittings and I’m making it work. ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [April 8, 2011, 9:04am UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/264 "2011-04-08T09:04:02Z")
![http://i860.photobucket.com/albums/ab163/esford90/IMAG0544.jpg](http://i860.photobucket.com/albums/ab163/esford90/IMAG0544.jpg) ![http://i860.photobucket.com/albums/ab163/esford90/IMAG0546-1.jpg](http://i860.photobucket.com/albums/ab163/esford90/IMAG0546-1.jpg) ![http://i860.photobucket.com/albums/ab163/esford90/IMAG0545-1.jpg](http://i860.photobucket.com/albums/ab163/esford90/IMAG0545-1.jpg) ![http://i860.photobucket.com/albums/ab163/esford90/IMAG0547-1.jpg](http://i860.photobucket.com/albums/ab163/esford90/IMAG0547-1.jpg) ---
**Author:** ![38stang](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/38stang/32/7479_2.png) [@38stang](https://forums.speedlife.net/u/38stang)\ **Post date:** [April 8, 2011, 9:59am UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/265 "2011-04-08T09:59:42Z")
I’ve never seen this much care and love go into making a Honda clean. nice job ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [April 8, 2011, 1:01pm UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/266 "2011-04-08T13:01:32Z")
the amount of clean that this car is , is fucking retarded lol ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [April 8, 2011, 5:35pm UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/267 "2011-04-08T17:35:34Z")
> [@38stang](#): > > I’ve never seen this much care and love go into making a Honda clean. nice job Haha no “rice” here. Well except for the exhaust. But I want to get rid of it. Thanks :tup: ---
**Author:** ![pirite](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pirite/32/5308_2.png) [@pirite](https://forums.speedlife.net/u/pirite)\ **Post date:** [April 8, 2011, 5:59pm UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/268 "2011-04-08T17:59:21Z")
cant wait to see this when its done! ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [April 8, 2011, 9:17pm UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/269 "2011-04-08T21:17:04Z")
Just put the hatch on and also ordered my booster delete kit. Im going to try it out and if its uncomfortable to push the brakes I will put the booster back on and sell the chasebays kit. ---
**Author:** ![Karter](https://avatars.discourse-cdn.com/v4/letter/k/e480ec/32.png) [@Karter](https://forums.speedlife.net/u/Karter)\ **Post date:** [April 9, 2011, 4:08am UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/270 "2011-04-09T04:08:59Z")
optical illusion or are the control arm bolts in the back rusty? looking great ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [April 9, 2011, 8:52am UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/271 "2011-04-09T08:52:11Z")
They do have some surface rust on them. I plan on ordering a lot of replacement bolts when I place my order with majestic Honda for all of my trim pieces. I just needed the car to be a full rolling chassis when it went for paint ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [April 9, 2011, 9:41am UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/272 "2011-04-09T09:41:25Z")
is this going to have disc brakes all the way around? ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [April 9, 2011, 5:43pm UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/273 "2011-04-09T17:43:34Z")
> [@deebo](#): > > is this going to have disc brakes all the way around? Well I dont plan on converting it to drum brakes lol so yes. All Si’s came with all wheel disc. ---
**Author:** ![juicedz4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/juicedz4/32/5051_2.png) [@juicedz4](https://forums.speedlife.net/u/juicedz4)\ **Post date:** [April 9, 2011, 6:11pm UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/274 "2011-04-09T18:11:55Z")
This is Fn awesome. Nice job. Dan ---
**Author:** ![myfakeevo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/myfakeevo/32/5372_2.png) [@myfakeevo](https://forums.speedlife.net/u/myfakeevo)\ **Post date:** [April 9, 2011, 6:51pm UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/275 "2011-04-09T18:51:14Z")
i wouldnt even drive this car with all the effort you are putting behind it. it should be in a museum and get the ferrari seal of platinum approval ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [April 10, 2011, 12:07am UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/276 "2011-04-10T00:07:06Z")
> [@juicedz4](#): > > This is Fn awesome. Nice job. > > Dan Thanks man but its nothing like your build lol :tup: > [@myfakeevo](#): > > i wouldnt even drive this car with all the effort you are putting behind it. it should be in a museum and get the ferrari seal of platinum approval I’m buying another dd in June so this will only be out on super nice days. Thanks !! 🙂 ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [April 10, 2011, 6:46pm UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/277 "2011-04-10T18:46:42Z")
Put the sunroof back together and bolted it up with a couple bolts. I need to find the bag with the right ones and it will sit up more flush with the roof ![http://i860.photobucket.com/albums/ab163/esford90/IMAG0554.jpg](http://i860.photobucket.com/albums/ab163/esford90/IMAG0554.jpg) ![http://i860.photobucket.com/albums/ab163/esford90/IMAG0555.jpg](http://i860.photobucket.com/albums/ab163/esford90/IMAG0555.jpg) ---
**Author:** ![honda4life](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/honda4life/32/5300_2.png) [@honda4life](https://forums.speedlife.net/u/honda4life)\ **Post date:** [April 10, 2011, 11:07pm UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/278 "2011-04-10T23:07:38Z")
this is turly the best build ive read and seen in a while! what exhaust you going to go to ryan? ---
**Author:** ![esford90](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/esford90/32/5314_2.png) [@esford90](https://forums.speedlife.net/u/esford90)\ **Post date:** [April 11, 2011, 4:53pm UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/279 "2011-04-11T16:53:48Z")
I would like a rsr or greedy catback but both are not in production anymore and are hard to find. Or ill buy a kteller and it will be crazy loud? Lol ---
**Author:** ![JDMSIR](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdmsir/32/7376_2.png) [@JDMSIR](https://forums.speedlife.net/u/JDMSIR)\ **Post date:** [April 11, 2011, 5:10pm UTC](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682/280 "2011-04-11T17:10:50Z")
> [@esford90](#): > > Well I dont plan on converting it to drum brakes lol so yes. All Si’s came with all wheel disc. 88-89 had drums. Car is looking great though… [Previous page](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682.md?page=13) [Next page](https://forums.speedlife.net/t/esford90s-crx-si-build-second-try/160682.md?page=15)