# Evo/4g63 Owners few questions.... **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [February 25, 2008, 10:27am UTC](https://forums.speedlife.net/t/evo-4g63-owners-few-questions/43991 "2008-02-25T10:27:35Z")\ **Posts on this page:** 10\ **Page:** 2
**Author:** ![nitroinsane](https://avatars.discourse-cdn.com/v4/letter/n/d26b3c/32.png) [@nitroinsane](https://forums.speedlife.net/u/nitroinsane)\ **Post date:** [February 28, 2008, 11:21am UTC](https://forums.speedlife.net/t/evo-4g63-owners-few-questions/43991/21 "2008-02-28T11:21:30Z")
> [@badnewsmini](#): > > I wish I could say that was an option but its really not… I have a pretty well equipped garage no lift but air-tools/ hoist heated two car garage… my uncle offered to let me do it in his garage (he does have a lift but then I would have a 2 day limit as he uses his garage for work.) so I’d rather be able to just walk away at points if I get frustrated and come back when I want. the cars off the road so if it takes me weeks it would be fine. > > but ya Paul I figure ill probably start doing it with the member there if It gets to frustrating ill remove it… maybe ill give you a heads up the weekend ill be under the car… and you could stop by, shot the poop, grab a beer I mean pop (as I would never give beer to a minor), and give a few pointers… I have 3 jacks but I can grab another. Paul is 21 btw ---
**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\ **Post date:** [February 28, 2008, 11:30am UTC](https://forums.speedlife.net/t/evo-4g63-owners-few-questions/43991/22 "2008-02-28T11:30:19Z")
> [@psphinx81](#): > > i did it in my garage on jackstands w/ jacks supporting the motor… wtf is so hard about it? its not hard, just time consuming taking all the other BS off to get the actual tranny out > > edit: get a tranny jack, made my life so much easier. as well as a slide hammer, u will need that to get your axles out good for you, if you’ve done it already under those conditions then you should be fine. ---
**Author:** ![Devioustsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/devioustsi/32/7406_2.png) [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)\ **Post date:** [February 28, 2008, 7:48pm UTC](https://forums.speedlife.net/t/evo-4g63-owners-few-questions/43991/23 "2008-02-28T19:48:25Z")
Evo clutches are fun. I hated that ss clutch line though. Aarron I remember you complaining and wishing me luck before you left. I also remember being done that night… ---
**Author:** ![BadnewsMike](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/badnewsmike/32/7419_2.png) [@BadnewsMike](https://forums.speedlife.net/u/BadnewsMike)\ **Post date:** [February 28, 2008, 10:15pm UTC](https://forums.speedlife.net/t/evo-4g63-owners-few-questions/43991/24 "2008-02-28T22:15:04Z")
> [@nitroinsane](#): > > Paul is 21 btw I know I just like giving him a hard time because he’s always being picked on for looking so young. But ya I was going to grab a slid hammer I have one but should grab a heaver one… Badnews tho smashed the oil pan in the jetta last night wish this was done oh well… ---
**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\ **Post date:** [February 29, 2008, 5:22am UTC](https://forums.speedlife.net/t/evo-4g63-owners-few-questions/43991/25 "2008-02-29T05:22:43Z")
then it’s proven, I suck as a mechanic and complain about everything. I think it’s because I enjoy driving a lot more then fixing. ---
**Author:** ![Devioustsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/devioustsi/32/7406_2.png) [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)\ **Post date:** [February 29, 2008, 9:13am UTC](https://forums.speedlife.net/t/evo-4g63-owners-few-questions/43991/26 "2008-02-29T09:13:21Z")
I only meant fun on a lift and using sarcasism at the same time… I’d rather do an awd dsm anyday. ---
**Author:** ![Jeller](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@Jeller](https://forums.speedlife.net/u/Jeller)\ **Post date:** [February 29, 2008, 10:10am UTC](https://forums.speedlife.net/t/evo-4g63-owners-few-questions/43991/27 "2008-02-29T10:10:42Z")
[QUOTE=Devioustsi;851120]Evo clutches are fun. I hated that ss clutch line though. QUOTE] I had no issues doing it at all. Done in about 15 mins. Here is the clutch line I have: [http://www.speed-source.net/](http://www.speed-source.net/) Very nice piece, coated, and the begining of the line is angled slightly for better fitment (easier install also). Jeller ---
**Author:** ![Devioustsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/devioustsi/32/7406_2.png) [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)\ **Post date:** [February 29, 2008, 10:42am UTC](https://forums.speedlife.net/t/evo-4g63-owners-few-questions/43991/28 "2008-02-29T10:42:05Z")
> [@Jeller](#): > > [quote=Devioustsi;851120]Evo clutches are fun. I hated that ss clutch line though. > QUOTE] > > I had no issues doing it at all. Done in about 15 mins. > > Here is the clutch line I have: > > [http://www.speed-source.net/](http://www.speed-source.net/) > > Very nice piece, coated, and the begining of the line is angled slightly for better fitment (easier install also). > > Jeller The one I did whent all the way from the master cylinder to the slave… such a pia with no room to put the fitting on master and it came supplied the wrong bango bolt… ---
**Author:** ![Devioustsi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/devioustsi/32/7406_2.png) [@Devioustsi](https://forums.speedlife.net/u/Devioustsi)\ **Post date:** [February 29, 2008, 10:46am UTC](https://forums.speedlife.net/t/evo-4g63-owners-few-questions/43991/29 "2008-02-29T10:46:11Z")
Come to think about it I don’t think it was Aarron’s car… ---
**Author:** ![Jeller](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@Jeller](https://forums.speedlife.net/u/Jeller)\ **Post date:** [February 29, 2008, 11:09am UTC](https://forums.speedlife.net/t/evo-4g63-owners-few-questions/43991/30 "2008-02-29T11:09:12Z")
[quote=“Devioustsi,post:28,topic:43991"”] > [@Jeller;851721](#): > > The one I did whent all the way from the master cylinder to the slave… such a pia with no room to put the fitting on master and it came supplied the wrong bango bolt… Mine only goes till it becomes oem hardline. But I will say that the slight angle the fitting has near the master cylinder does help. I can easily see that if the fitting was straight, it would be alot tighter fitment. Jeller [Previous page](https://forums.speedlife.net/t/evo-4g63-owners-few-questions/43991.md?page=1)