# exhaust and intercooler fabrication material
**URL:** https://forums.speedlife.net/t/exhaust-and-intercooler-fabrication-material/222531
**Category:** Classifieds
**Created:** [April 27, 2012, 5:25am UTC](https://forums.speedlife.net/t/exhaust-and-intercooler-fabrication-material/222531 "2012-04-27T05:25:35Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@drunkmunky](https://forums.speedlife.net/u/drunkmunky)
#### Post date: [April 27, 2012, 5:25am UTC](https://forums.speedlife.net/t/exhaust-and-intercooler-fabrication-material/222531/1 "2012-04-27T05:25:35Z")
Had some extra material lying around after fabricating my exhaust system and intercooler piping
2.5" SS-U-J bend
retails for 45-50 bucks from vibrant
I’ll sell mine for 20
3" SS turbo turbine flange 4-bolt
15
Varying lengths of 2.5" t6061 aluminum piping from 4-8"
all straight pieces
10 for the box
Varying lengths and bends of 3" SS piping
20 for the box
pickup only
pm for contact
---
### Author:  [@drunkmunky](https://forums.speedlife.net/u/drunkmunky)
#### Post date: [April 30, 2012, 6:47am UTC](https://forums.speedlife.net/t/exhaust-and-intercooler-fabrication-material/222531/2 "2012-04-30T06:47:45Z")
exhaust piping
> **[04292012138](https://awdu13.wordpress.com/04292012138/)**
>
> Visit the post for more.
intercooler straight pieces
> **[04292012136](https://awdu13.wordpress.com/04292012136/)**
>
> Visit the post for more.
I also have 1.5’ of -10 AN stainless steel braided line for turbo oil return
15 dollars
and I also have an unused -10 AN male fitting
6 dollars
---
### Author:  [@drunkmunky](https://forums.speedlife.net/u/drunkmunky)
#### Post date: [May 5, 2012, 7:23pm UTC](https://forums.speedlife.net/t/exhaust-and-intercooler-fabrication-material/222531/3 "2012-05-05T19:23:02Z")
Stainless steel piping is all gone.