# Exhaust gasket material \*PICS\*
**URL:** https://forums.speedlife.net/t/exhaust-gasket-material-pics/91486
**Category:** SON240sx Automotive
**Created:** [December 30, 2005, 7:15am UTC](https://forums.speedlife.net/t/exhaust-gasket-material-pics/91486 "2005-12-30T07:15:28Z")
**Posts on this page:** 5
**Page:** 1
### Author:  [@Gonad](https://forums.speedlife.net/u/Gonad)
#### Post date: [December 30, 2005, 7:15am UTC](https://forums.speedlife.net/t/exhaust-gasket-material-pics/91486/1 "2005-12-30T07:15:28Z")
Just wondering where I could purchase like a small sheet of exhaust
gasket? Something you can use to cut your own pieces. And has to
resist high temps.
Napa? Canadian Tire? Princess Auto? Parts Source?
---
### Author:  [@Happy240sx](https://forums.speedlife.net/u/Happy240sx)
#### Post date: [December 30, 2005, 7:30am UTC](https://forums.speedlife.net/t/exhaust-gasket-material-pics/91486/2 "2005-12-30T07:30:56Z")
Can Tire has gasket sheets (sheets of material) but I don’t think it can withstand the heat in an exhaust.
Specifically - what connection do you need a gasket for? (I have some spares at home)
---
### Author:  [@Gonad](https://forums.speedlife.net/u/Gonad)
#### Post date: [December 30, 2005, 8:41am UTC](https://forums.speedlife.net/t/exhaust-gasket-material-pics/91486/3 "2005-12-30T08:41:25Z")
I need the following:
- 7-bolt flange turbo outlet. Here’s a pic --\> [Turbo Back Picture](http://www.son240sx.ca/images/gonad/turboback.jpg)
I know one of the bolt holes is butchered but meh :dunno:
- 38mm Tial (standard?) wastegate flange
- 40mm HKS wastegate inlet flange
- Outlet flange from 40mm HKS wastegate. Here’s a pic (looks like a 38mm flange) --\> [Wastegate outlet flange](http://www.importbitz.com/images/turbo/wastegate.jpg)
The reason I need both 38mm and 40mm wastegate flange is because my
manifold is a 38mm wastegate flanged, and my actual wastegate is a
40mm HKS wastegate unit.
I thought of trading in my 40mm for a 38mm but I paid a crap load and I
figure I keep it and just build a conversion tube (which I’m already in the process of).
I’ll try to have some pics tonight if I can of the stuff at my shop.
---
### Author:  [@robbbby](https://forums.speedlife.net/u/robbbby)
#### Post date: [December 30, 2005, 8:51am UTC](https://forums.speedlife.net/t/exhaust-gasket-material-pics/91486/4 "2005-12-30T08:51:09Z")
I don’t know if you have carquests out there, but the carquests here sell exactly what you are looking for. It’s like $70 for the sheet but it is large and you can make a shit ton of gaskets and it’s really good stuff for high heat applications. A buddy of mine used it for all his turbo gaskets etc and it hasn’t given him any trouble. It’s a bit pricey but when you start considering the cost of normal exhaust/turbo gaskets are $10 a piece it’s really worth it.
---
### Author:  [@Gonad](https://forums.speedlife.net/u/Gonad)
#### Post date: [December 30, 2005, 8:55am UTC](https://forums.speedlife.net/t/exhaust-gasket-material-pics/91486/5 "2005-12-30T08:55:57Z")
Hrm, apparenly there are Car Quests in Brampton near where I live.
Thanks robby, I think I’m gonna go give them a visit.
I probablly won’t buy it right away if I can save a few bucks. Dan? :naughty: