# Exhaust problem
**URL:** https://forums.speedlife.net/t/exhaust-problem/170826
**Category:** PittSpeed Automotive
**Created:** [December 4, 2004, 8:14am UTC](https://forums.speedlife.net/t/exhaust-problem/170826 "2004-12-04T08:14:28Z")
**Posts on this page:** 16
**Page:** 1
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [December 4, 2004, 8:14am UTC](https://forums.speedlife.net/t/exhaust-problem/170826/1 "2004-12-04T08:14:28Z")
Y-pipe doesn’t fit up to headers (off about 3/4"). Going to call MAC but I’ll probably just have to get it bent a little. Any suggestions where to get it done, or any other ideas?
---
### Author:  [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [December 4, 2004, 8:26am UTC](https://forums.speedlife.net/t/exhaust-problem/170826/2 "2004-12-04T08:26:33Z")
got any pics of y pipe?
---
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [December 4, 2004, 8:32am UTC](https://forums.speedlife.net/t/exhaust-problem/170826/3 "2004-12-04T08:32:25Z")
> [@8.1crew](#):
>
> got any pics of y pipe?
---
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [December 4, 2004, 11:21am UTC](https://forums.speedlife.net/t/exhaust-problem/170826/4 "2004-12-04T11:21:35Z")
Woohoo! Stuck a 2 ft piece of pipe in one end & stood on it, had the wife kneel on the y-pipe to keep it from moving, and pulled really hard. Back under car to check fitment. Repeat about 6 times & it goes on now. Not a perfect fit but it shoudl pull together and little copper gasket maker should seal it up.
I knew doing all those deadlifts would pay off some day!
Now if I can just figure out how I can get a wrench on the one nut I’m good. I see a broken 1/4" extension in the future.
---
### Author:  [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [December 4, 2004, 5:53pm UTC](https://forums.speedlife.net/t/exhaust-problem/170826/5 "2004-12-04T17:53:09Z")
💏
---
### Author:  [@Quik](https://forums.speedlife.net/u/Quik)
#### Post date: [December 4, 2004, 5:55pm UTC](https://forums.speedlife.net/t/exhaust-problem/170826/6 "2004-12-04T17:55:13Z")
someon should of warned you about MAC products they are really cheaply made shit
---
### Author:  [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)
#### Post date: [December 4, 2004, 7:37pm UTC](https://forums.speedlife.net/t/exhaust-problem/170826/7 "2004-12-04T19:37:52Z")
> [@Quik](#):
>
> someon should of warned you about MAC products they are really cheaply made shit
Had just as much trouble with my Borla y-pipe, actually it was worse. Did a lot of research and for the price it was the best choice for me. Didn’t want to do LTs, AS&Ms were a fortune, plug access sucked with some others. Since they aren’t stainless, they’re a good bit cheaper, but I went with the Jet Hot coating. We’ll see if they put out! ❌
---
### Author:  [@Quik](https://forums.speedlife.net/u/Quik)
#### Post date: [December 4, 2004, 7:41pm UTC](https://forums.speedlife.net/t/exhaust-problem/170826/8 "2004-12-04T19:41:13Z")
i know MAC shit for stangs is garbage
---
### Author:  [@Shaggy](https://forums.speedlife.net/u/Shaggy)
#### Post date: [December 4, 2004, 7:47pm UTC](https://forums.speedlife.net/t/exhaust-problem/170826/9 "2004-12-04T19:47:29Z")
> [@Quik](#):
>
> someon should of warned you about MAC products they are really cheaply made shit
How many Products have you had :stick:
---
### Author:  [@Quik](https://forums.speedlife.net/u/Quik)
#### Post date: [December 4, 2004, 7:50pm UTC](https://forums.speedlife.net/t/exhaust-problem/170826/10 "2004-12-04T19:50:00Z")
> [@SHAG](#):
>
> How many Products have you had :stick:
lets see suspension are from them plus i seen their headers= junk, heard the mufflers=junk seen the pipes junk
---
### Author:  [@Shaggy](https://forums.speedlife.net/u/Shaggy)
#### Post date: [December 4, 2004, 7:51pm UTC](https://forums.speedlife.net/t/exhaust-problem/170826/11 "2004-12-04T19:51:54Z")
how many problems do i have ? Zippo Notta Ziltcho.
---
### Author:  [@Quik](https://forums.speedlife.net/u/Quik)
#### Post date: [December 4, 2004, 7:53pm UTC](https://forums.speedlife.net/t/exhaust-problem/170826/12 "2004-12-04T19:53:02Z")
> [@SHAG](#):
>
> how many problems do i have ? Zippo Notta Ziltcho.
haha shit that could be a long list of things…are we talking about the car again?
---
### Author:  [@Shaggy](https://forums.speedlife.net/u/Shaggy)
#### Post date: [December 4, 2004, 8:01pm UTC](https://forums.speedlife.net/t/exhaust-problem/170826/13 "2004-12-04T20:01:12Z")
> [@Quik](#):
>
> haha shit that could be a long list of things…are we talking about the car again?
nope, the OBGYN.
---
### Author:  [@Quik](https://forums.speedlife.net/u/Quik)
#### Post date: [December 4, 2004, 8:07pm UTC](https://forums.speedlife.net/t/exhaust-problem/170826/14 "2004-12-04T20:07:36Z")
😕
---
### Author:  [@Shaggy](https://forums.speedlife.net/u/Shaggy)
#### Post date: [December 4, 2004, 8:09pm UTC](https://forums.speedlife.net/t/exhaust-problem/170826/15 "2004-12-04T20:09:14Z")
[www.jeeves.com](http://www.jeeves.com) or [www.google.com](http://www.google.com)
---
### Author:  [@Quik](https://forums.speedlife.net/u/Quik)
#### Post date: [December 4, 2004, 8:11pm UTC](https://forums.speedlife.net/t/exhaust-problem/170826/16 "2004-12-04T20:11:13Z")
nope speak it