# exhaust question

**URL:** <https://forums.speedlife.net/t/exhaust-question/143653>\
**Category:** Canada Nissan Automotive\
**Created:** [August 4, 2006, 4:30pm UTC](https://forums.speedlife.net/t/exhaust-question/143653 "2006-08-04T16:30:05Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![benji](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@benji](https://forums.speedlife.net/u/benji)\
**Post date:** [August 4, 2006, 4:30pm UTC](https://forums.speedlife.net/t/exhaust-question/143653/1 "2006-08-04T16:30:05Z")

</div>

has anyone on here installed a new exhaust and had any trouble with it touching the undercarrage and makin a ton of noise. if so what have you guys done to fix it? :!:

---

<div class="post-metadata">

**Author:** ![CA18DET-180SX](https://avatars.discourse-cdn.com/v4/letter/c/e0b2c6/32.png) [@CA18DET-180SX](https://forums.speedlife.net/u/CA18DET-180SX)\
**Post date:** [August 4, 2006, 5:31pm UTC](https://forums.speedlife.net/t/exhaust-question/143653/2 "2006-08-04T17:31:23Z")

</div>

My exhaust is constantly bouncing off something, as to what I did to fix, I just got used to it.

---

<div class="post-metadata">

**Author:** ![insaneskiier](https://avatars.discourse-cdn.com/v4/letter/i/b487fb/32.png) [@insaneskiier](https://forums.speedlife.net/u/insaneskiier)\
**Post date:** [August 4, 2006, 5:38pm UTC](https://forums.speedlife.net/t/exhaust-question/143653/3 "2006-08-04T17:38:24Z")

</div>

> [@benji](#):
>
> has anyone on here installed a new exhaust and had any trouble with it touching the undercarrage and makin a ton of noise. if so what have you guys done to fix it? :!:

you can get your hangers bent/re-welded by any exhaust shop to position it better

---

<div class="post-metadata">

**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\
**Post date:** [August 4, 2006, 5:43pm UTC](https://forums.speedlife.net/t/exhaust-question/143653/4 "2006-08-04T17:43:53Z")

</div>

bend, cut, weld to make it stop rubbing. Everytime it hits it puts stress on your manifold.

Ask Jamie (Phat240) how much fun it is to replace his turbo to manifold gasket because it came loose. Or replace his cracked elbow.

---

<div class="post-metadata">

**Author:** ![imported\_silvia](https://avatars.discourse-cdn.com/v4/letter/i/e79b87/32.png) [@imported\_silvia](https://forums.speedlife.net/u/imported_silvia)\
**Post date:** [August 4, 2006, 5:57pm UTC](https://forums.speedlife.net/t/exhaust-question/143653/5 "2006-08-04T17:57:40Z")

</div>

I just had the muffler guy that built my exhuast tweek it with a crow bar! just bent a hanger a few cm’s and it has never made a sound since.

---

<div class="post-metadata">

**Author:** ![apex\_drifter](https://avatars.discourse-cdn.com/v4/letter/a/ac8455/32.png) [@apex\_drifter](https://forums.speedlife.net/u/apex_drifter)\
**Post date:** [August 4, 2006, 6:39pm UTC](https://forums.speedlife.net/t/exhaust-question/143653/6 "2006-08-04T18:39:53Z")

</div>

My exhaust got ripped off (caught by a rock on road construction) and after it was welded back on, it would rattle against my diff. . .so i welded another hanger and bent it away from it. . .but then the exhaust broke off again. . . :oops:

---

<div class="post-metadata">

**Author:** ![benji](https://avatars.discourse-cdn.com/v4/letter/b/f17d59/32.png) [@benji](https://forums.speedlife.net/u/benji)\
**Post date:** [August 7, 2006, 8:01pm UTC](https://forums.speedlife.net/t/exhaust-question/143653/7 "2006-08-07T20:01:01Z")

</div>

thanks guys i got the problem solved. it was my back hanger piece that connects to the frame rail.it was being held on by only one bolt and it was lose to boot. ahhhhhhh… so relieved!!! 😃