# exhaust work from meineke

**URL:** <https://forums.speedlife.net/t/exhaust-work-from-meineke/176006>\
**Category:** PittSpeed Automotive\
**Created:** [July 31, 2005, 5:05pm UTC](https://forums.speedlife.net/t/exhaust-work-from-meineke/176006 "2005-07-31T17:05:27Z")\
**Posts on this page:** 13\
**Page:** 2

<div class="post-metadata">

**Author:** ![The1SloR\_T](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/the1slor_t/32/5984_2.png) [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)\
**Post date:** [August 1, 2005, 5:52pm UTC](https://forums.speedlife.net/t/exhaust-work-from-meineke/176006/21 "2005-08-01T17:52:29Z")

</div>

> [@Quik](#):
>
> any restriction any interference anything that prevents air flow from flowing smoothly is hurtfull for performance. so the compression bending reducing the inside diameter of the pipe a small % where as mandrel just shinks the overall lenght of the pipe instead of the inside diameter

x2

---

<div class="post-metadata">

**Author:** ![The1SloR\_T](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/the1slor_t/32/5984_2.png) [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)\
**Post date:** [August 1, 2005, 6:25pm UTC](https://forums.speedlife.net/t/exhaust-work-from-meineke/176006/22 "2005-08-01T18:25:44Z")

</div>

> [@Quik](#):
>
> perfect example of ppl not knowing what the hell they are talking about

im sorry quik is never wrong

---

<div class="post-metadata">

**Author:** ![Dominator](https://avatars.discourse-cdn.com/v4/letter/d/a4c791/32.png) [@Dominator](https://forums.speedlife.net/u/Dominator)\
**Post date:** [August 1, 2005, 7:36pm UTC](https://forums.speedlife.net/t/exhaust-work-from-meineke/176006/23 "2005-08-01T19:36:56Z")

</div>

ah, the list grows for people that need to enroll in tubing 101.

For a stock cavalier, there will be no performance difference.

Mandrel benders are very pricey. [http://www.ercolina-usa.com/mandrel-bender.htm](http://www.ercolina-usa.com/mandrel-bender.htm)  
You can probably expect to start around $30,000. I can assure you no local shop is using one, or there would be heavy marketing to recoop the machine cost.

Benefits of mandrel bends vs compression bends are not up for discussion. Mandrel wins game over.

---

<div class="post-metadata">

**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\
**Post date:** [August 1, 2005, 7:37pm UTC](https://forums.speedlife.net/t/exhaust-work-from-meineke/176006/24 "2005-08-01T19:37:20Z")

</div>

> [@The1SloShelby](#):
>
> im sorry quik is never wrong

your statement and the other one talking about compression bends was incorrect.

---

<div class="post-metadata">

**Author:** ![rusty240det](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rusty240det/32/5946_2.png) [@rusty240det](https://forums.speedlife.net/u/rusty240det)\
**Post date:** [August 2, 2005, 5:52am UTC](https://forums.speedlife.net/t/exhaust-work-from-meineke/176006/25 "2005-08-02T05:52:01Z")

</div>

> [@red04cavy](#):
>
> Honestly, there is no performance difference between the compression bending that 05XRunner has and mandrel bending. I looked into this when I got my exhaust done the first time. Compression bending still retains the diameter of the pipe, it’s just in the form of an oval rather than being round. You still retain size in the bends, it just looks different. If there is any difference in performance betwen the 2, it is VERY minimal.

🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣 🤣

---

<div class="post-metadata">

**Author:** ![fshowcars](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fshowcars/32/5937_2.png) [@fshowcars](https://forums.speedlife.net/u/fshowcars)\
**Post date:** [August 2, 2005, 6:22am UTC](https://forums.speedlife.net/t/exhaust-work-from-meineke/176006/26 "2005-08-02T06:22:27Z")

</div>

> [@red04cavy](#):
>
> Honestly, there is no performance difference between the compression bending that 05XRunner has and mandrel bending. I looked into this when I got my exhaust done the first time. Compression bending still retains the diameter of the pipe, it’s just in the form of an oval rather than being round. You still retain size in the bends, it just looks different. If there is any difference in performance betwen the 2, it is VERY minimal.

:down: :down: :down:

---

<div class="post-metadata">

**Author:** ![peterock17](https://avatars.discourse-cdn.com/v4/letter/p/bcef8e/32.png) [@peterock17](https://forums.speedlife.net/u/peterock17)\
**Post date:** [August 2, 2005, 10:48am UTC](https://forums.speedlife.net/t/exhaust-work-from-meineke/176006/27 "2005-08-02T10:48:24Z")

</div>

i know redline exhaust north of pittsburgh does not have a mandrel bender but they use pre mandrel bent elbows to fab up and exhaust. i think showtime paid 180 bucks for a 2.25 stainless steel catback a couple of years ago.

---

<div class="post-metadata">

**Author:** ![77rednecktruck](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/77rednecktruck/32/5966_2.png) [@77rednecktruck](https://forums.speedlife.net/u/77rednecktruck)\
**Post date:** [August 2, 2005, 11:53am UTC](https://forums.speedlife.net/t/exhaust-work-from-meineke/176006/28 "2005-08-02T11:53:36Z")

</div>

since this seems to be a pipe bending thread now - I have a cracked manifold and just ordered a set of headers for the truck :kekegay: , I will not need any bends in the exhaust until I have to go over the rear end. Will a non mandrel bend that far back have any performance issue? Not like my truck is a power monster or anything, but that’s not the point. I am not worried about performance, but am curious to what gains os losses will be.

---

<div class="post-metadata">

**Author:** ![The1SloR\_T](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/the1slor_t/32/5984_2.png) [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)\
**Post date:** [August 2, 2005, 2:14pm UTC](https://forums.speedlife.net/t/exhaust-work-from-meineke/176006/29 "2005-08-02T14:14:01Z")

</div>

> [@Quik](#):
>
> your statement and the other one talking about compression bends was incorrect.

yes it was, but it doesnt mean you have to say something like i have no idea what im talking about…  
be nice quik 🙂

---

<div class="post-metadata">

**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\
**Post date:** [August 2, 2005, 2:25pm UTC](https://forums.speedlife.net/t/exhaust-work-from-meineke/176006/30 "2005-08-02T14:25:16Z")

</div>

u dont

---

<div class="post-metadata">

**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\
**Post date:** [August 2, 2005, 2:34pm UTC](https://forums.speedlife.net/t/exhaust-work-from-meineke/176006/31 "2005-08-02T14:34:46Z")

</div>

My exhaust is bigger than your exhaust :rolleyes:

---

<div class="post-metadata">

**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\
**Post date:** [August 2, 2005, 4:38pm UTC](https://forums.speedlife.net/t/exhaust-work-from-meineke/176006/32 "2005-08-02T16:38:54Z")

</div>

> [@The1SloShelby](#):
>
> yes it was, but it doesnt mean you have to say something like i have no idea what im talking about…  
> be nice quik 🙂

you dont know the fuck your talking about. half you fucking posts get deleted cause of that shit. if you would actually sit back and realize some things you would hopefully gain some useful info but you keep going on in your own world and thinking you know shit about certain topics.

talking about topics, whats this shit about you forcing a girl to give you head or you trying to rape a girl?

---

<div class="post-metadata">

**Author:** ![The1SloR\_T](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/the1slor_t/32/5984_2.png) [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)\
**Post date:** [August 2, 2005, 5:09pm UTC](https://forums.speedlife.net/t/exhaust-work-from-meineke/176006/33 "2005-08-02T17:09:17Z")

</div>

> [@Quik](#):
>
> you dont know the fuck your talking about. half you fucking posts get deleted cause of that shit. if you would actually sit back and realize some things you would hopefully gain some useful info but you keep going on in your own world and thinking you know shit about certain topics.
> 
> talking about topics, whats this shit about you forcing a girl to give you head or you trying to rape a girl?

here you got starting stuff again… :rolleyes: what the hell are you talking about?

[Previous page](https://forums.speedlife.net/t/exhaust-work-from-meineke/176006.md?page=1)
