# f/i guys ... come in please

**URL:** <https://forums.speedlife.net/t/f-i-guys-come-in-please/258665>\
**Category:** Shift518 Automotive\
**Created:** [May 30, 2011, 3:48pm UTC](https://forums.speedlife.net/t/f-i-guys-come-in-please/258665 "2011-05-30T15:48:45Z")\
**Posts on this page:** 1\
**Showing post:** 37

<div class="post-metadata">

**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\
**Post date:** [May 31, 2011, 9:57am UTC](https://forums.speedlife.net/t/f-i-guys-come-in-please/258665/37 "2011-05-31T09:57:11Z")

</div>

> [@WTB: Wireless Guitar for the Guitar Hero's for Xbox 360](https://forums.speedlife.net/t/wtb-wireless-guitar-for-the-guitar-heros-for-xbox-360/42659/2):
>
> I have an idea of how to do it. Only the jeeps have done top mount singles so far. 76mm billet precisions are what the 2 use. Just need someone to make a mounting place and piping etc.

I love laying pipe. I can do it and do it right… you know that. :number1

> [@fs 1994 b350 dodge raised roof extended van](https://forums.speedlife.net/t/fs-1994-b350-dodge-raised-roof-extended-van/40948/23):
>
> orrr. get two buick gand national turbos and run 9 psi off of their internal wastegates. turn your stock cast manifolds around and start fabbing up some pipe…if you’re ballin on a budget

BINGO. stock manifolds for $20 flip them and turn them around, $100 in stainless to make a collector and turbo flange. Turbo is mounted, make a brace off the motor for it and you are done. put a flex section in the mix too to be safe.

some guys run the compressor right up put the BOV in the middle and put a 90 deg after the BOV flange and its directly into the LS1 type intake/throttle body, no intercooler since its low boost and all of about 10 inches of tubing into the intake.

wastegate off the mix and a dump tube.

add some injectors and a toon.

5.3 iron block with a 76mm bunk ass turbo stock heads stock intake 42lb injectors, 10 psi, 100K on motor, 500WHP.

---

_[View the full topic](https://forums.speedlife.net/t/f-i-guys-come-in-please/258665)._