# Fabrication Shops in Edmonton

**URL:** <https://forums.speedlife.net/t/fabrication-shops-in-edmonton/149726>\
**Category:** Canada Nissan Automotive\
**Created:** [September 13, 2008, 11:38pm UTC](https://forums.speedlife.net/t/fabrication-shops-in-edmonton/149726 "2008-09-13T23:38:37Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![apex\_drifter](https://avatars.discourse-cdn.com/v4/letter/a/ac8455/32.png) [@apex\_drifter](https://forums.speedlife.net/u/apex_drifter)\
**Post date:** [September 13, 2008, 11:38pm UTC](https://forums.speedlife.net/t/fabrication-shops-in-edmonton/149726/1 "2008-09-13T23:38:37Z")

</div>

Would you guys be able to recommend some fab shops in the Edmonton area? Looking for a custom set of headers and exhaust . . .

---

<div class="post-metadata">

**Author:** ![imported\_silvia](https://avatars.discourse-cdn.com/v4/letter/i/e79b87/32.png) [@imported\_silvia](https://forums.speedlife.net/u/imported_silvia)\
**Post date:** [September 15, 2008, 8:17pm UTC](https://forums.speedlife.net/t/fabrication-shops-in-edmonton/149726/2 "2008-09-15T20:17:46Z")

</div>

I too am interested in getting a custom exhaust done up. Let me know if you find somewhere good!

---

<div class="post-metadata">

**Author:** ![apex\_drifter](https://avatars.discourse-cdn.com/v4/letter/a/ac8455/32.png) [@apex\_drifter](https://forums.speedlife.net/u/apex_drifter)\
**Post date:** [September 16, 2008, 12:11am UTC](https://forums.speedlife.net/t/fabrication-shops-in-edmonton/149726/3 "2008-09-16T00:11:25Z")

</div>

> [@Cobra or Viper](https://forums.speedlife.net/t/cobra-or-viper/6289/54):
>
> I too am interested in getting a custom exhaust done up. Let me know if you find somewhere good!

Yep will do. . .I might also just bite the bullet and get a welder and some material lol but i’ll let ya know. . .

---

<div class="post-metadata">

**Author:** ![Sylvan\_Lake\_V35](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sylvan_lake_v35/32/5838_2.png) [@Sylvan\_Lake\_V35](https://forums.speedlife.net/u/Sylvan_Lake_V35)\
**Post date:** [October 7, 2008, 9:52pm UTC](https://forums.speedlife.net/t/fabrication-shops-in-edmonton/149726/4 "2008-10-07T21:52:31Z")

</div>

> [@Cobra or Viper](https://forums.speedlife.net/t/cobra-or-viper/6289/47):
>
> Would you guys be able to recommend some fab shops in the Edmonton area? Looking for a custom set of headers and exhaust . . .

You looking for headers for your G? I know a guy that went TT(not me) and has a used set of Alpha works he might let go cheaper than you could build them for. Let me know.

---

<div class="post-metadata">

**Author:** ![apex\_drifter](https://avatars.discourse-cdn.com/v4/letter/a/ac8455/32.png) [@apex\_drifter](https://forums.speedlife.net/u/apex_drifter)\
**Post date:** [October 9, 2008, 7:29am UTC](https://forums.speedlife.net/t/fabrication-shops-in-edmonton/149726/5 "2008-10-09T07:29:59Z")

</div>

I have some Impul headers already. . .any fabrication would be for the s14. . .the Vq’s exhaust at the first Y is wider than the s-chassis, so it needs to be slimmed down a bit. . .also need to figure out how to crossover the passenger-side exhaust to connect to the OEM setup . . .