# fabrication

**URL:** https://forums.speedlife.net/t/fabrication/106644
**Category:** Classifieds
**Created:** [May 17, 2007, 6:30pm UTC](https://forums.speedlife.net/t/fabrication/106644 "2007-05-17T18:30:08Z")
**Posts on this page:** 19
**Page:** 1

<div class="post-metadata">

### Author: ![zeeshan](https://avatars.discourse-cdn.com/v4/letter/z/c4cdca/32.png) [@zeeshan](https://forums.speedlife.net/u/zeeshan)
#### Post date: [May 17, 2007, 6:30pm UTC](https://forums.speedlife.net/t/fabrication/106644/1 "2007-05-17T18:30:08Z")

</div>

anyone need any stainless OR STEEL ic pipes and FMIC kits made? give me a heads up 😛

example of the work i’ve done on my car

 ![http://i5.photobucket.com/albums/y168/xull1x/ic_hotpipe2.jpg](http://i5.photobucket.com/albums/y168/xull1x/ic_hotpipe2.jpg)  
 ![http://i5.photobucket.com/albums/y168/xull1x/inlet.jpg](http://i5.photobucket.com/albums/y168/xull1x/inlet.jpg)  
 ![http://i5.photobucket.com/albums/y168/xull1x/ic_pipe_beading2.jpg](http://i5.photobucket.com/albums/y168/xull1x/ic_pipe_beading2.jpg)  
 ![http://i5.photobucket.com/albums/y168/xull1x/ic_pipes_polished.jpg](http://i5.photobucket.com/albums/y168/xull1x/ic_pipes_polished.jpg)  
 ![http://i5.photobucket.com/albums/y168/xull1x/wastegate_compressor.jpg](http://i5.photobucket.com/albums/y168/xull1x/wastegate_compressor.jpg)  
 ![http://i5.photobucket.com/albums/y168/xull1x/wastegate_dump.jpg](http://i5.photobucket.com/albums/y168/xull1x/wastegate_dump.jpg)  
 ![http://i5.photobucket.com/albums/y168/xull1x/tig_stainless.jpg](http://i5.photobucket.com/albums/y168/xull1x/tig_stainless.jpg)  
 ![http://i5.photobucket.com/albums/y168/xull1x/bumper1.jpg](http://i5.photobucket.com/albums/y168/xull1x/bumper1.jpg)  
 ![http://i5.photobucket.com/albums/y168/xull1x/ic.jpg](http://i5.photobucket.com/albums/y168/xull1x/ic.jpg)  
 ![http://i5.photobucket.com/albums/y168/xull1x/ic.jpg](http://i5.photobucket.com/albums/y168/xull1x/ic.jpg)

---

<div class="post-metadata">

### Author: ![nwmrkt](https://avatars.discourse-cdn.com/v4/letter/n/aca169/32.png) [@nwmrkt](https://forums.speedlife.net/u/nwmrkt)
#### Post date: [May 17, 2007, 7:46pm UTC](https://forums.speedlife.net/t/fabrication/106644/2 "2007-05-17T19:46:48Z")

</div>

mmmm looks good, what kind of other work can you do? ( car related)

---

<div class="post-metadata">

### Author: ![zeeshan](https://avatars.discourse-cdn.com/v4/letter/z/c4cdca/32.png) [@zeeshan](https://forums.speedlife.net/u/zeeshan)
#### Post date: [May 17, 2007, 10:43pm UTC](https://forums.speedlife.net/t/fabrication/106644/3 "2007-05-17T22:43:01Z")

</div>

mainly fabrication and standalone tuning…

i can do engine swaps too

---

<div class="post-metadata">

### Author: ![nwmrkt](https://avatars.discourse-cdn.com/v4/letter/n/aca169/32.png) [@nwmrkt](https://forums.speedlife.net/u/nwmrkt)
#### Post date: [May 28, 2007, 5:26pm UTC](https://forums.speedlife.net/t/fabrication/106644/4 "2007-05-28T17:26:01Z")

</div>

so you can make intercooler kits (i provide core), exhausts and also intakes? Sounds good when my swap time comes around…

---

<div class="post-metadata">

### Author: ![Keez](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/keez/32/5570_2.png) [@Keez](https://forums.speedlife.net/u/Keez)
#### Post date: [May 28, 2007, 9:03pm UTC](https://forums.speedlife.net/t/fabrication/106644/5 "2007-05-28T21:03:31Z")

</div>

how much for the ic piping if i geta core? hit up some prices !!

---

<div class="post-metadata">

### Author: ![nwmrkt](https://avatars.discourse-cdn.com/v4/letter/n/aca169/32.png) [@nwmrkt](https://forums.speedlife.net/u/nwmrkt)
#### Post date: [May 28, 2007, 9:06pm UTC](https://forums.speedlife.net/t/fabrication/106644/6 "2007-05-28T21:06:44Z")

</div>

or do your provide cores too?

---

<div class="post-metadata">

### Author: ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)
#### Post date: [May 28, 2007, 11:17pm UTC](https://forums.speedlife.net/t/fabrication/106644/7 "2007-05-28T23:17:09Z")

</div>

How much for a BJ, I know some people that really need them

😃

---

<div class="post-metadata">

### Author: ![zeeshan](https://avatars.discourse-cdn.com/v4/letter/z/c4cdca/32.png) [@zeeshan](https://forums.speedlife.net/u/zeeshan)
#### Post date: [May 28, 2007, 11:20pm UTC](https://forums.speedlife.net/t/fabrication/106644/8 "2007-05-28T23:20:41Z")

</div>

> [@XP Problem - Won't Startup](https://forums.speedlife.net/t/xp-problem-wont-startup/12716/27):
>
> so you can make intercooler kits (i provide core), exhausts and also intakes? Sounds good when my swap time comes around…

i dont like to do exhausts, ill do a downpipe, but thats about it

i don’t have a hoist – im currently doing this out of my house and that way people dont have to pay as much – side thing for me

IC piping, turbo inlets, intakes, coolant piping, etc i can do it all

as far as the core is concerned, i only like to use precision turbo intercoolers. they are the best

---

<div class="post-metadata">

### Author: ![zeeshan](https://avatars.discourse-cdn.com/v4/letter/z/c4cdca/32.png) [@zeeshan](https://forums.speedlife.net/u/zeeshan)
#### Post date: [May 28, 2007, 11:21pm UTC](https://forums.speedlife.net/t/fabrication/106644/9 "2007-05-28T23:21:22Z")

</div>

> [@~\*OFFICIAL Buffalo Sabres Thread\*~](https://forums.speedlife.net/t/official-buffalo-sabres-thread/4208/2472):
>
> how much for the ic piping if i geta core? hit up some prices !!

depends on the material you want to make it out of, pm me, show me what you want done (ie a pic of your car) and a little bit more of a description – and i can tell you

---

<div class="post-metadata">

### Author: ![KoukiS14](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/koukis14/32/5522_2.png) [@KoukiS14](https://forums.speedlife.net/u/KoukiS14)
#### Post date: [May 29, 2007, 6:37am UTC](https://forums.speedlife.net/t/fabrication/106644/10 "2007-05-29T06:37:07Z")

</div>

Do you work after hours? I may have a cat I need some flanges welded to so maybe you can leave some contact info?

---

<div class="post-metadata">

### Author: ![matty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matty/32/5043_2.png) [@matty](https://forums.speedlife.net/u/matty)
#### Post date: [May 29, 2007, 8:14am UTC](https://forums.speedlife.net/t/fabrication/106644/11 "2007-05-29T08:14:50Z")

</div>

why would you make stainless ic pipes?

i was under the impression that this is a bad idea since steel holds heat in very well, and thats the last thing you want for your ic pipes

---

<div class="post-metadata">

### Author: ![Doba](https://avatars.discourse-cdn.com/v4/letter/d/a8b319/32.png) [@Doba](https://forums.speedlife.net/u/Doba)
#### Post date: [May 29, 2007, 8:18am UTC](https://forums.speedlife.net/t/fabrication/106644/12 "2007-05-29T08:18:29Z")

</div>

^^ like Matty said, lets see some Aluminum pipe kits made up

---

<div class="post-metadata">

### Author: ![zeeshan](https://avatars.discourse-cdn.com/v4/letter/z/c4cdca/32.png) [@zeeshan](https://forums.speedlife.net/u/zeeshan)
#### Post date: [May 29, 2007, 9:51am UTC](https://forums.speedlife.net/t/fabrication/106644/13 "2007-05-29T09:51:53Z")

</div>

> [@FS: Pioneer In-Dash DVD player and master unit](https://forums.speedlife.net/t/fs-pioneer-in-dash-dvd-player-and-master-unit/12311/10):
>
> Do you work after hours? I may have a cat I need some flanges welded to so maybe you can leave some contact info?

yes, pm me

---

<div class="post-metadata">

### Author: ![zeeshan](https://avatars.discourse-cdn.com/v4/letter/z/c4cdca/32.png) [@zeeshan](https://forums.speedlife.net/u/zeeshan)
#### Post date: [May 29, 2007, 10:00am UTC](https://forums.speedlife.net/t/fabrication/106644/14 "2007-05-29T10:00:36Z")

</div>

> [@matty"](#):
>
> why would you make stainless ic pipes?
> 
> i was under the impression that this is a bad idea since steel holds heat in very well, and thats the last thing you want for your ic pipes

on a race car, aluminum is the way to go.

1. you get a weight savings of 5-6lb.
2. aluminum heat soaks much faster than stainless steel

i always use stainless on all my projects/cars because i can weld it good. also more importantly, since these are street cars we’re dealing with – stainless virtually is dent free, scratch free, oxidation free

and on top of all that – when welded perfect, aluminum will always be weaker when tig welded. stainless welds are always stronger than the material itself. the only con in my eyes about stainless is weight – but that is usually minimized by using very thin wall tubing(18-20gauge) (not exhaust)

i can weld aluminum intercoolers, radiators, pretty decent now – as far as piping is concerned, it’s got a long way to go ;p

---

<div class="post-metadata">

### Author: ![matty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matty/32/5043_2.png) [@matty](https://forums.speedlife.net/u/matty)
#### Post date: [May 29, 2007, 10:18am UTC](https://forums.speedlife.net/t/fabrication/106644/15 "2007-05-29T10:18:32Z")

</div>

i disagree

but this is your thread

---

<div class="post-metadata">

### Author: ![atutt](https://avatars.discourse-cdn.com/v4/letter/a/c4cdca/32.png) [@atutt](https://forums.speedlife.net/u/atutt)
#### Post date: [May 29, 2007, 2:33pm UTC](https://forums.speedlife.net/t/fabrication/106644/16 "2007-05-29T14:33:22Z")

</div>

\*answered…

---

<div class="post-metadata">

### Author: ![fastback240](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fastback240/32/5591_2.png) [@fastback240](https://forums.speedlife.net/u/fastback240)
#### Post date: [May 29, 2007, 4:45pm UTC](https://forums.speedlife.net/t/fabrication/106644/17 "2007-05-29T16:45:15Z")

</div>

you only do tig or do u have a mig to?

---

<div class="post-metadata">

### Author: ![Sky14](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@Sky14](https://forums.speedlife.net/u/Sky14)
#### Post date: [May 29, 2007, 9:04pm UTC](https://forums.speedlife.net/t/fabrication/106644/18 "2007-05-29T21:04:17Z")

</div>

can u make coooling pannels also?  
im going to find u pics of the 300zx also  
thanks

---

<div class="post-metadata">

### Author: ![Wiltzor](https://avatars.discourse-cdn.com/v4/letter/w/aeb1de/32.png) [@Wiltzor](https://forums.speedlife.net/u/Wiltzor)
#### Post date: [May 29, 2007, 9:56pm UTC](https://forums.speedlife.net/t/fabrication/106644/19 "2007-05-29T21:56:02Z")

</div>

turbozee does wicked work.

i went to him on a couple occasions for welding when piecing together my turbo kit and he impressed me both times.