# factory bash bar! WUDUP

**URL:** <https://forums.speedlife.net/t/factory-bash-bar-wudup/224523>\
**Category:** SON240sx Automotive\
**Created:** [July 11, 2012, 2:30pm UTC](https://forums.speedlife.net/t/factory-bash-bar-wudup/224523 "2012-07-11T14:30:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![DatsunBOB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/datsunbob/32/6081_2.png) [@DatsunBOB](https://forums.speedlife.net/u/DatsunBOB)\
**Post date:** [July 11, 2012, 2:30pm UTC](https://forums.speedlife.net/t/factory-bash-bar-wudup/224523/1 "2012-07-11T14:30:14Z")

</div>

Hey dudes! So this isn’t off a 240 but I’m building a drift car and seeing how this site gets some of the most traffic and a lot of people are drifters or fans of, I thought this would be a good place to post. I was going to take off the factory rebar and make a bash bar. When I took the bumper skins off, the rebar was pretty small so I cut and welded the seem, welded around the bumper mounts. I was just wondering if this should be strong enough. This way I still have all the proper hole locations and spacing

Before  
[ATTACH=CONFIG]21465[/ATTACH]

After  
[ATTACH=CONFIG]21464[/ATTACH]

---

<div class="post-metadata">

**Author:** ![S13GG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13gg/32/5506_2.png) [@S13GG](https://forums.speedlife.net/u/S13GG)\
**Post date:** [July 12, 2012, 3:37pm UTC](https://forums.speedlife.net/t/factory-bash-bar-wudup/224523/2 "2012-07-12T15:37:58Z")

</div>

strong enough to support the bumper weight = yes

any misbehavior = no