# FAST motorsports in Albany, NY (Attn: All LS vehicles) **URL:** \ **Category:** Shift518 Automotive\ **Created:** [December 13, 2009, 5:52pm UTC](https://forums.speedlife.net/t/fast-motorsports-in-albany-ny-attn-all-ls-vehicles/249044 "2009-12-13T17:52:31Z")\ **Posts on this page:** 1\ **Showing post:** 106
**Author:** ![262](https://avatars.discourse-cdn.com/v4/letter/2/439d5e/32.png) [@262](https://forums.speedlife.net/u/262)\ **Post date:** [December 18, 2009, 10:37am UTC](https://forums.speedlife.net/t/fast-motorsports-in-albany-ny-attn-all-ls-vehicles/249044/106 "2009-12-18T10:37:27Z")
> [@new to me](https://forums.speedlife.net/t/new-to-me/27344/14): > > can ya do ltx vehicles or no ? That is a complicated answer in my eyes. I have tuned ltx vehicles but have stopped tuning the ltx computer. [http://www.eficonnection.com/24x/default.htm](http://www.eficonnection.com/24x/default.htm) Since this kit came out to retro fit the ls computer onto the lt platform I have always reccomending swapping to it then I will tune from there. I fully understand its an slight investment but the 0411 pcm is miles ahead of the lt computer and expands the horizon of what you can do with your engine and gives you much better control over your transmission as well. The DIY kits arent that expensive and the swap truly isnt that bad. Just sucks that GM IMO skimpped on the lt computer compared to the '749 in the syty and then the 0411 in the LS platform > [@Team \[DRIFT\] Practice Session Video](https://forums.speedlife.net/t/team-drift-practice-session-video/27308/67): > > Actually 3 weeks ago there were ALOT of the “big name guys” at RLMS for a tuning school. I was on the list to goto that school since Adam at popsracing got me in as a favor. Had a business trip planned already so I have to wait for the next one. I have talked to Greg banish a few times before and he is a very smart man. Just wanted to take the class to confirm my practices especially with the late model virtual VE tables and the scaling when hitting injector flow limits or creating more room in the maf and load tables on high HP or forced inducted applications > [@Coffee at home??](https://forums.speedlife.net/t/coffee-at-home/25476/35): > > To each his own. I can see where Katie is coming from since this guy has tuned a ton of trailblazers A ton of LS platforms just recently more TBSS’s than anything else since they are the popular thing. > [@1evilzr1"](#): > > tuning is tuning, weather a lambo or a honda! trailblazer or any other ls vehicle in the world… Very intelligent post and yes that holds 99% true. the priciples are the same just implementing changes from platform to platform > [@Official 24 Thread - 2007](https://forums.speedlife.net/t/official-24-thread-2007/22722/271): > > Every car has different aspects to tuning that you have to work with I agree as well. I.E. the tbss loads the motor harder than a vette so it takes less timing to get to MBT > [@What happens when colorblind people mod cars](https://forums.speedlife.net/t/what-happens-when-colorblind-people-mod-cars/27399/20): > > me and Brandon had a pretty extensive convo for a good half hour on the phone the other night about tuning my car and shit…needless to say I was impressed and he really knows what hes talking about when it comes to Tuning LSx cars with HP Tuners. > > I sent him my current tune and he looked the whole thing over and compared it to a stock 01 LS1 tune and went over every single thing that needs to be tuned on my car…apparently the only thing that is tuned on my car is WOT AFR’s and a bumped up idle… Yes your car was a classic case of “dyno tune” otherwise known as PE raping. only major changes were injector flow rate, idle timing and WOT commanded fueling. The maf and ve were BONE STOCK!!! and it was commanding around 9.7:1 to get your 12.5ish afr at wot. I know these are details you and I talked about but details I wanted everyone to know. Also, I have been lacking on posting results since I know guys will want pictures of the car or sometimes timeslips. I have no problem posting combo’s and results but in the respect that some of my guys still grudge race around here pics will not be posted. F-body afr 205 headed custom spec cam by me 347 CI stock crank stock rods forged pistons 525hp/500ft-lbs 6speed car through a 12bolt 3850lbs raceweight and still traps upper 130’s F-body “SBE” car custom cam dart heads carb mani 4150 style TB th400 12bolt spray (and lots of it) 3300 race weight has seen the 9.1x range many many times --- _[View the full topic](https://forums.speedlife.net/t/fast-motorsports-in-albany-ny-attn-all-ls-vehicles/249044)._