# Fatti03msp's Mini Mazda Rebuild **URL:** \ **Category:** Builds\ **Created:** [December 22, 2008, 12:15pm UTC](https://forums.speedlife.net/t/fatti03msps-mini-mazda-rebuild/201192 "2008-12-22T12:15:39Z")\ **Posts on this page:** 1\ **Showing post:** 26
**Author:** ![King\_of\_Metal](https://avatars.discourse-cdn.com/v4/letter/k/839c29/32.png) [@King\_of\_Metal](https://forums.speedlife.net/u/King_of_Metal)\ **Post date:** [March 31, 2009, 9:33am UTC](https://forums.speedlife.net/t/fatti03msps-mini-mazda-rebuild/201192/26 "2009-03-31T09:33:29Z")
> [@NYSpeed boxing fans, Hatton vs Mayweather](https://forums.speedlife.net/t/nyspeed-boxing-fans-hatton-vs-mayweather/39949/13): > > im running SSAFC and i did upgrade my fuel pump with to the walboro 255lph pump, fuel isnt my problem yet. The last thing i need to pick up for the fuel are some bigger injectors but i wont need those yet, but the piggyback i have doesnt have timing control. Once i get a standalone i can up the boost alot more cause ill be able to tune the timing, but untill then im just going to keep it safe like you mentioned. This is my DD so if it blows again im really screwed. ever hear of something called a boost timing master? i believe msd makes it? quite a few people have had very good outcomes with them… not 100% sure how it works, i still have the remains of one from my build that i never used, it replaces the coil, and takes signal from the map sensor, or off the vaccuum line, into a vaccuum block where you can hook up your boost gauge, and it will automatically do your timing at higher boost levels… just a thought… damn i wish i still had my damn injectors… can you use rx7 injectors? theres 2 different sets, the na uses high imp, and the turbo2 uses low…could be an easier way to get your fuel up to par --- _[View the full topic](https://forums.speedlife.net/t/fatti03msps-mini-mazda-rebuild/201192)._