# FEELER: looking for new job

**URL:** <https://forums.speedlife.net/t/feeler-looking-for-new-job/21933>\
**Category:** Classifieds\
**Created:** [December 20, 2006, 5:40pm UTC](https://forums.speedlife.net/t/feeler-looking-for-new-job/21933 "2006-12-20T17:40:06Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![4x4jimmy](https://avatars.discourse-cdn.com/v4/letter/4/51bf81/32.png) [@4x4jimmy](https://forums.speedlife.net/u/4x4jimmy)\
**Post date:** [December 20, 2006, 5:40pm UTC](https://forums.speedlife.net/t/feeler-looking-for-new-job/21933/1 "2006-12-20T17:40:06Z")

</div>

I am a welder/fitter, currently employed at Adsco, previously employed at ebenezer rail car services, and Elma collision.

ive done everything, i have a 480 hour certification in mig/tig/stick/fluxcore/and spray. Blueprints are not a problem.

the 480 hour course included:  
SMAW Safety  
Types of Joints & Welds  
Operating Characteristics  
Electrode Classification  
Oxy-Fuel Safety & Set-Up  
Flat Fillet Welding  
Horizontal Fillet Welding  
Vertical Fillet Welding  
Overhead Fillet Welding  
Torch Cutting  
Power Sources  
Weld Troubleshooting  
Common Defects  
Identification of Welds  
Flat Groove Welding  
Horizontal Groove Welding  
Vertical Groove Welding  
Overhead Groove Welding  
SMAW Safety  
Types of Joints and Welds  
Operating Characteristics  
Equipment Set-Up  
Oxy-Fuel Safety & Set-Up  
Forms of Metal Transfer  
Shielding Gases  
Electrode Classification  
Flat Fillet Welding  
Horizontal Fillet Welding  
Vertical Fillet Welding  
Overhead Fillet Welding  
Torch Cutting  
Flat Groove Welding  
Horizontal Groove Welding  
Vertical Groove Welding  
Shop Math  
Basic Blueprint  
Welding Symbols  
Tungsten Electrode  
Fillet Metal Classification  
Properties of Stainless  
Properties of Aluminum  
Horizontal Fillet on Stainless  
Flat Groove on Stainless  
Horizontal Fillet on Aluminum  
Flat Groove on Aluminum

---

<div class="post-metadata">

**Author:** ![4x4jimmy](https://avatars.discourse-cdn.com/v4/letter/4/51bf81/32.png) [@4x4jimmy](https://forums.speedlife.net/u/4x4jimmy)\
**Post date:** [December 20, 2006, 7:37pm UTC](https://forums.speedlife.net/t/feeler-looking-for-new-job/21933/2 "2006-12-20T19:37:06Z")

</div>

bump.

---

<div class="post-metadata">

**Author:** ![Resurrected\_J](https://avatars.discourse-cdn.com/v4/letter/r/85f322/32.png) [@Resurrected\_J](https://forums.speedlife.net/u/Resurrected_J)\
**Post date:** [December 20, 2006, 9:11pm UTC](https://forums.speedlife.net/t/feeler-looking-for-new-job/21933/3 "2006-12-20T21:11:15Z")

</div>

yo dude put ur resume on www.monster.com— then the job’s reply to you, and you can search for a job in that field as well… Good luck man

---

<div class="post-metadata">

**Author:** ![4x4jimmy](https://avatars.discourse-cdn.com/v4/letter/4/51bf81/32.png) [@4x4jimmy](https://forums.speedlife.net/u/4x4jimmy)\
**Post date:** [December 21, 2006, 8:34am UTC](https://forums.speedlife.net/t/feeler-looking-for-new-job/21933/4 "2006-12-21T08:34:49Z")

</div>

thx