# fender roller **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [June 7, 2006, 11:17pm UTC](https://forums.speedlife.net/t/fender-roller/142857 "2006-06-07T23:17:25Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![the.k.w.c](https://avatars.discourse-cdn.com/v4/letter/t/e56c9b/32.png) [@the.k.w.c](https://forums.speedlife.net/u/the.k.w.c)\ **Post date:** [June 7, 2006, 11:17pm UTC](https://forums.speedlife.net/t/fender-roller/142857/1 "2006-06-07T23:17:25Z")
i need one for like a day so if u got one i would lide to borrow it …will pay of course ---
**Author:** ![Variable](https://avatars.discourse-cdn.com/v4/letter/v/cab0a1/32.png) [@Variable](https://forums.speedlife.net/u/Variable)\ **Post date:** [June 8, 2006, 2:52pm UTC](https://forums.speedlife.net/t/fender-roller/142857/2 "2006-06-08T14:52:59Z")
is your car lowered… if it is and you have a baseball bat in your garage… problem solved. or you can use plastic pipe. [http://forums.audiworld.com/s4/msgs/1745791.phtml](http://forums.audiworld.com/s4/msgs/1745791.phtml) ---
**Author:** ![the.k.w.c](https://avatars.discourse-cdn.com/v4/letter/t/e56c9b/32.png) [@the.k.w.c](https://forums.speedlife.net/u/the.k.w.c)\ **Post date:** [June 8, 2006, 6:05pm UTC](https://forums.speedlife.net/t/fender-roller/142857/3 "2006-06-08T18:05:59Z")
no i know that way i wANT A REAL ROLLER i dont want dents in the roll ---
**Author:** ![JVD](https://avatars.discourse-cdn.com/v4/letter/j/7feea3/32.png) [@JVD](https://forums.speedlife.net/u/JVD)\ **Post date:** [June 8, 2006, 9:05pm UTC](https://forums.speedlife.net/t/fender-roller/142857/4 "2006-06-08T21:05:57Z")
Dude, you don’t need to roll your fenders. Unless your car is super low(which it isn’t) or has low offset/wide wheels(which it doesn’t) don’t waste your time. It usually damages the paint around the fender a bit too. I think a heat gun helps a bit, but like I said, you don’t need to roll your fenders. ---
**Author:** ![the.k.w.c](https://avatars.discourse-cdn.com/v4/letter/t/e56c9b/32.png) [@the.k.w.c](https://forums.speedlife.net/u/the.k.w.c)\ **Post date:** [June 9, 2006, 5:06pm UTC](https://forums.speedlife.net/t/fender-roller/142857/5 "2006-06-09T17:06:39Z")
the car will be lower + im getting spacers so it needs to be rolled ---
**Author:** ![Variable](https://avatars.discourse-cdn.com/v4/letter/v/cab0a1/32.png) [@Variable](https://forums.speedlife.net/u/Variable)\ **Post date:** [June 10, 2006, 10:39am UTC](https://forums.speedlife.net/t/fender-roller/142857/6 "2006-06-10T10:39:19Z")
Why exactly are you getting spacers ? ---
**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\ **Post date:** [June 10, 2006, 11:16am UTC](https://forums.speedlife.net/t/fender-roller/142857/7 "2006-06-10T11:16:46Z")
If you buy good wheels you don’t need spacers. have fun with your 18 by 7’s ---
**Author:** ![Hustler\_M](https://avatars.discourse-cdn.com/v4/letter/h/91b2a8/32.png) [@Hustler\_M](https://forums.speedlife.net/u/Hustler_M)\ **Post date:** [June 12, 2006, 9:46pm UTC](https://forums.speedlife.net/t/fender-roller/142857/8 "2006-06-12T21:46:45Z")
Just some advice, make sure to take a razor and cut the paint/undercoating so when you roll it , it doesn’t pull the paint as well. After just give it a quick shot of undercoating on the part you cut. ---
**Author:** ![the.k.w.c](https://avatars.discourse-cdn.com/v4/letter/t/e56c9b/32.png) [@the.k.w.c](https://forums.speedlife.net/u/the.k.w.c)\ **Post date:** [June 12, 2006, 9:53pm UTC](https://forums.speedlife.net/t/fender-roller/142857/9 "2006-06-12T21:53:02Z")
thanks thats a good one so i cut it heat it then roll it … i still need the roller tho any one have one