# Fender Rolling? Anyone? **URL:** \ **Category:** Shift518 Automotive\ **Created:** [March 27, 2009, 7:57am UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111 "2009-03-27T07:57:30Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![OsoiNA6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/osoina6/32/6301_2.png) [@OsoiNA6](https://forums.speedlife.net/u/OsoiNA6)\ **Post date:** [March 27, 2009, 7:57am UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/1 "2009-03-27T07:57:30Z")
Anyone know a source that can do a good job fender rolling to fit tires? Please let me know, thanks. ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [March 27, 2009, 8:02am UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/2 "2009-03-27T08:02:32Z")
YOU can do it bro… make you one of these: [http://forums.vwvortex.com/zerothread?id=2435165](http://forums.vwvortex.com/zerothread?id=2435165) ---
**Author:** ![PJB](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pjb/32/6389_2.png) [@PJB](https://forums.speedlife.net/u/PJB)\ **Post date:** [March 27, 2009, 8:11am UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/3 "2009-03-27T08:11:22Z")
Gearhead does it. They were rolling fenders a few nights ago. ---
**Author:** ![GearheadNY.com](https://avatars.discourse-cdn.com/v4/letter/g/9de053/32.png) [@GearheadNY.com](https://forums.speedlife.net/u/GearheadNY.com)\ **Post date:** [March 29, 2009, 10:29am UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/4 "2009-03-29T10:29:06Z")
LOL, yeah. I think we did 5 cars since last week. It’s a hell of a lot of work to not crack the paint, but it’s worth it! I did the BMW the other day and it came out really well, but we’ll have to pull them a little more. Too bad I already wore the name off the side of the tires! We’ll help you out though if you’re interested. ---
**Author:** ![dc2nick](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dc2nick/32/6289_2.png) [@dc2nick](https://forums.speedlife.net/u/dc2nick)\ **Post date:** [March 29, 2009, 11:04am UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/5 "2009-03-29T11:04:12Z")
how much to roll fenders jay? ---
**Author:** ![Vovchandr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/vovchandr/32/6275_2.png) [@Vovchandr](https://forums.speedlife.net/u/Vovchandr)\ **Post date:** [March 29, 2009, 11:27am UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/6 "2009-03-29T11:27:45Z")
Jay do you pull fenders too? ---
**Author:** ![Fn\_Skanks](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fn_skanks/32/6308_2.png) [@Fn\_Skanks](https://forums.speedlife.net/u/Fn_Skanks)\ **Post date:** [March 29, 2009, 2:02pm UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/7 "2009-03-29T14:02:42Z")
i’ll pull your fenders, but then you’ll need someone to shoot it. ---
**Author:** ![BlueS14240sx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blues14240sx/32/6410_2.png) [@BlueS14240sx](https://forums.speedlife.net/u/BlueS14240sx)\ **Post date:** [March 29, 2009, 2:41pm UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/8 "2009-03-29T14:41:08Z")
> [@69 Camaro resto - It's ALIVE! - no 56k](https://forums.speedlife.net/t/69-camaro-resto-its-alive-no-56k/13530/100): > > ! I did the BMW the other day and it came out really well, but we’ll have to pull them a little more. … ---
**Author:** ![Fn\_Skanks](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fn_skanks/32/6308_2.png) [@Fn\_Skanks](https://forums.speedlife.net/u/Fn_Skanks)\ **Post date:** [March 29, 2009, 4:23pm UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/9 "2009-03-29T16:23:06Z")
you quoted that because??? ---
**Author:** ![GearheadNY.com](https://avatars.discourse-cdn.com/v4/letter/g/9de053/32.png) [@GearheadNY.com](https://forums.speedlife.net/u/GearheadNY.com)\ **Post date:** [March 29, 2009, 5:01pm UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/10 "2009-03-29T17:01:42Z")
It all depends on how much work is involved. Usually it’s about 1.5 to 2.5 hours @ $65/hr. It’s just a drawn out procedure, but when done properly you get a good result. No sweet JDM bat rolling/chipping paint going on here, lol. ---
**Author:** ![kramerbuccs24](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kramerbuccs24/32/6397_2.png) [@kramerbuccs24](https://forums.speedlife.net/u/kramerbuccs24)\ **Post date:** [March 29, 2009, 5:04pm UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/11 "2009-03-29T17:04:34Z")
> [@New... Colt??](https://forums.speedlife.net/t/new-colt/16291/10): > > you quoted that because??? … ---
**Author:** ![Fn\_Skanks](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fn_skanks/32/6308_2.png) [@Fn\_Skanks](https://forums.speedlife.net/u/Fn_Skanks)\ **Post date:** [March 29, 2009, 5:07pm UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/12 "2009-03-29T17:07:54Z")
“pulling,” and “rolling” are two different things. just figured i’d clarify. with pulling you cut the arch lip where it meets the body, physically pull the piece out, weld in a filler, and do the bodywork to finish it off. rolling is self explanatory. you use the tool, and heat up the area with some heat to avoid cracking the finish. ---
**Author:** ![kramerbuccs24](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kramerbuccs24/32/6397_2.png) [@kramerbuccs24](https://forums.speedlife.net/u/kramerbuccs24)\ **Post date:** [March 29, 2009, 5:08pm UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/13 "2009-03-29T17:08:21Z")
> [@1994 camaro rear end](https://forums.speedlife.net/t/1994-camaro-rear-end/16323/19): > > “pulling,” and “rolling” are two different things. just figured i’d clarify. > > with pulling you cut the arch lip where it meets the body, physically pull the piece out, weld in a filler, and do the bodywork to finish it off. > > rolling is self explanatory. you use the tool, and heat up the area with some heat to avoid cracking the finish. … ---
**Author:** ![YFZ460](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yfz460/32/6343_2.png) [@YFZ460](https://forums.speedlife.net/u/YFZ460)\ **Post date:** [March 29, 2009, 6:10pm UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/14 "2009-03-29T18:10:14Z")
> [@Starting a new clothing company](https://forums.speedlife.net/t/starting-a-new-clothing-company/16360/40): > > … suck it ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [March 29, 2009, 8:34pm UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/15 "2009-03-29T20:34:10Z")
> [@1994 camaro rear end](https://forums.speedlife.net/t/1994-camaro-rear-end/16323/19): > > “pulling,” and “rolling” are two different things. just figured i’d clarify. > > with pulling you cut the arch lip where it meets the body, physically pull the piece out, weld in a filler, and do the bodywork to finish it off. > > rolling is self explanatory. you use the tool, **and heat up the area with some heat** to avoid cracking the finish. what else could i use to heat up the panel other than heat? i’m currently out. :haha ---
**Author:** ![kramerbuccs24](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kramerbuccs24/32/6397_2.png) [@kramerbuccs24](https://forums.speedlife.net/u/kramerbuccs24)\ **Post date:** [March 29, 2009, 8:34pm UTC](https://forums.speedlife.net/t/fender-rolling-anyone/243111/16 "2009-03-29T20:34:23Z")
> [@FS: Apple Powermac G5 Quad](https://forums.speedlife.net/t/fs-apple-powermac-g5-quad/16373/3): > > suck it … > [@The Slow & The Lame](https://forums.speedlife.net/t/the-slow-the-lame/16392/6): > > what else could i use to heat up the panel other than heat? i’m currently out. :haha hot fire :shifty