# Fenders rolled, and hammerd **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [April 28, 2009, 12:29pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920 "2009-04-28T12:29:11Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [April 28, 2009, 12:29pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/1 "2009-04-28T12:29:11Z")
I rented philis roller, thanks agian (I still owe you) used my heat gun. 1st side too my time, the other I knew what I was doing and went a lot faster. But it came out mint, the paint did not crack:) But started to chip a few flakes right on the lip were its spot welded to the outer wheel well on one side. They were a little miss alined so the paint didn’t get in there that good, but its basically inside up under the wheel well now. I touched it up and its fine. And hammers a few spot more for the little tires I run. Once you do the BFH mod you fit can get some room in there, its like gm made it that way or something? Once I drive the car thew some rain it will match the rest of the undercoating ![http://i2.photobucket.com/albums/y11/studderin/IMG_2994.jpg](http://i2.photobucket.com/albums/y11/studderin/IMG_2994.jpg) ![http://i2.photobucket.com/albums/y11/studderin/IMG_2997.jpg](http://i2.photobucket.com/albums/y11/studderin/IMG_2997.jpg) ![http://i2.photobucket.com/albums/y11/studderin/IMG_3006.jpg](http://i2.photobucket.com/albums/y11/studderin/IMG_3006.jpg) ---
**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\ **Post date:** [April 28, 2009, 12:45pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/2 "2009-04-28T12:45:09Z")
nice work. does phil still have this? (I thought I heard a rumor that he sold it) I need to roll my fenders and would rather throw him a couple $$. I just sent phil a Pm. ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [April 28, 2009, 12:57pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/3 "2009-04-28T12:57:25Z")
last I head the kid didnt send payment yet, and he was waiting? So you might in in luck. $$\ **Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\ **Post date:** [April 28, 2009, 1:00pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/4 "2009-04-28T13:00:09Z") shit… if this works out I’ll buy you one for the referral also. does he still live with you just down the street from me? ---
**Author:** ![snowracer101](https://avatars.discourse-cdn.com/v4/letter/s/258eb7/32.png) [@snowracer101](https://forums.speedlife.net/u/snowracer101)\ **Post date:** [April 28, 2009, 1:01pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/5 "2009-04-28T13:01:17Z")
wilwood brakes = baller ---
**Author:** ![brent\_strong](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/brent_strong/32/7203_2.png) [@brent\_strong](https://forums.speedlife.net/u/brent_strong)\ **Post date:** [April 28, 2009, 1:01pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/6 "2009-04-28T13:01:43Z")
Phil is in the city. Or at least somewhere closer. It’s not the old Bailey Rd apartment anyway… I’ll txt you his number, Aaron. ---
**Author:** ![02NismoSpecV](https://avatars.discourse-cdn.com/v4/letter/0/74df32/32.png) [@02NismoSpecV](https://forums.speedlife.net/u/02NismoSpecV)\ **Post date:** [April 28, 2009, 1:02pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/7 "2009-04-28T13:02:58Z")
ugh yours looks like it was soo much easier to do than mine was. i have like twice the material there with the pinch weld things. i only did the back 1/2 of mine because thats the only part that rubs. looks awesome tho! ---
**Author:** ![slow84ta](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slow84ta/32/7265_2.png) [@slow84ta](https://forums.speedlife.net/u/slow84ta)\ **Post date:** [April 28, 2009, 1:03pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/8 "2009-04-28T13:03:30Z")
good stuff ---
**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\ **Post date:** [April 28, 2009, 1:03pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/9 "2009-04-28T13:03:37Z")
> [@brent\_strong](#): > > Phil is in the city. Or at least somewhere closer. It’s not the old Bailey Rd apartment anyway… > > I’ll txt you his number, Aaron. nice! thanks. ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [April 28, 2009, 1:04pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/10 "2009-04-28T13:04:13Z")
fuuuuuuuuuuuuuuck I wanted a plate Studderin: you hace the roller still Studderin: I got you another customer DeusExMachinis: no its gone DeusExMachinis: oh well Studderin: fuuuuuuuuuuuck ---
**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\ **Post date:** [April 28, 2009, 1:05pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/11 "2009-04-28T13:05:02Z")
doh… too late. ---
**Author:** ![brent\_strong](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/brent_strong/32/7203_2.png) [@brent\_strong](https://forums.speedlife.net/u/brent_strong)\ **Post date:** [April 28, 2009, 1:05pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/12 "2009-04-28T13:05:04Z")
Failboat sets sail. Dammit Phil. ---
**Author:** ![DeusExMachina](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deusexmachina/32/5036_2.png) [@DeusExMachina](https://forums.speedlife.net/u/DeusExMachina)\ **Post date:** [April 28, 2009, 1:09pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/13 "2009-04-28T13:09:34Z")
Wow word spreads fast. :lol: I sold it for more than I bought it for so…yeah. ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [April 28, 2009, 1:13pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/14 "2009-04-28T13:13:31Z")
> [@sedlmeier101](#): > > wilwood brakes = baller There really nice, I got them for only $100. They have a working Ebrake, light weight, and they have a ton of rim room, with the caliper set back liek that. A pain to work on at 1st with a drum style ebrake not really designed to be so tight behind the axle flange, But I know how to get them out easy now. I think there were 11-12#'s lighter a side. The stock Ebrake system weights 22, and you can get a non Ebrake rotor with a alum hat that would be a lot lighter then that style. ---
**Author:** ![neonglh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/neonglh/32/4951_2.png) [@neonglh](https://forums.speedlife.net/u/neonglh)\ **Post date:** [April 28, 2009, 1:24pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/15 "2009-04-28T13:24:05Z")
Yea, no e-brake on my Wilwoods ☹ ---
**Author:** ![lower\_the\_dynamite](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lower_the_dynamite/32/7296_2.png) [@lower\_the\_dynamite](https://forums.speedlife.net/u/lower_the_dynamite)\ **Post date:** [April 28, 2009, 1:29pm UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/16 "2009-04-28T13:29:45Z")
Looks great! When I did mine, I had a little paint chips in under the fender. The only thing that sucked on mine was the first couple of hard launches, I did get a small wrinkle in the fender on the driver side. When I re-paint the car this year, I’ll be adding some filler to make it stonger so it doesn’t happen in the future. And, Willwoods are the shit. ![http://i133.photobucket.com/albums/q59/firehawk496/Firehawk004.jpg](http://i133.photobucket.com/albums/q59/firehawk496/Firehawk004.jpg) ---
**Author:** ![Studderin](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/studderin/32/7197_2.png) [@Studderin](https://forums.speedlife.net/u/Studderin)\ **Post date:** [April 29, 2009, 9:20am UTC](https://forums.speedlife.net/t/fenders-rolled-and-hammerd/66920/17 "2009-04-29T09:20:04Z")
Were the wrinkles above were a door ding would be? What did you have for a rear swaybar, SFC or a rollbar? You run a ebrake on those, is that a alum hat? looks newer then mine. lol