# few HDR **URL:** https://forums.speedlife.net/t/few-hdr/242997 **Category:** Shift518 Automotive **Created:** [March 23, 2009, 5:28am UTC](https://forums.speedlife.net/t/few-hdr/242997 "2009-03-23T05:28:22Z") **Posts on this page:** 1 **Showing post:** 38
### Author: ![SSmokinn\_SS](https://avatars.discourse-cdn.com/v4/letter/s/ec9cab/32.png) [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS) #### Post date: [March 23, 2009, 1:42pm UTC](https://forums.speedlife.net/t/few-hdr/242997/38 "2009-03-23T13:42:43Z")
> [@Is it in poor taste...](https://forums.speedlife.net/t/is-it-in-poor-taste/16021/18): > > once the car is over the lift, when u swing the arms over under the car, there is barely any clearance to fit in the pucks. if i were to lower the car that clearance would go away and i wouldnt be able to swing the arms under the car with the pucks attached to the car. like I said, not sure what your issue is. Tony has lowered many vettes (including his Z06) and his goes on the lift just fine. He even puts wood on the lift arms to make contact where your lifting it up to it doesnt scratch the frame paint. So if he can fit blocks off wood on his lift arms, and lift up his lowered vettes without using a jack, or wood or anything you have a problem. --- _[View the full topic](https://forums.speedlife.net/t/few-hdr/242997)._