# For Trade: Bee\*R Exhaust.. **URL:** \ **Category:** Classifieds\ **Created:** [December 25, 2005, 10:23pm UTC](https://forums.speedlife.net/t/for-trade-bee-r-exhaust/91397 "2005-12-25T22:23:14Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![BlitzSix](https://avatars.discourse-cdn.com/v4/letter/b/dec6dc/32.png) [@BlitzSix](https://forums.speedlife.net/u/BlitzSix)\ **Post date:** [December 25, 2005, 10:23pm UTC](https://forums.speedlife.net/t/for-trade-bee-r-exhaust/91397/1 "2005-12-25T22:23:14Z")
This is just a feeler… I currently have a mad jdm tyte Bee\*R exhaust on the car, I belive it’s 3 inch, catback, etc… As far as I know it’s a pretty rare exhaust, I don’t think you can find it for sale around here much, and it was pretty expensive when new I belive. Correct me if I’m wrong. I’ll see if I can get more info from the previous owner… It’s in fine working condition, cat is fine, passed e test with it a couple days ago no problem. It’s a little deformed near the end of it from being scraped against the ground (I’m assuming), cause it sits pretty low. Not cracked or anything though, I don’t think performance is affected. A wee bit too loud for my taste, so I either want to trade for the stock one plus a bunch of cash, or a quieter aftermarket one (maybe with cash, depending on condition and what not). Just send me offers for now, and we’ll see how it goes. You can definately see/inspect/hear the exhaust before we swap, and I’d like to do the same with yours… I’ll get some pics in a few days when I go rustproof the car. For now here’s a pic of the tip: ![http://www.performancescene.net/240sx/images/240sx%20037.jpg](http://www.performancescene.net/240sx/images/240sx%20037.jpg) Thanks, Vadim. ---
**Author:** ![Original\_Nutta](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/original_nutta/32/5474_2.png) [@Original\_Nutta](https://forums.speedlife.net/u/Original_Nutta)\ **Post date:** [December 26, 2005, 1:17am UTC](https://forums.speedlife.net/t/for-trade-bee-r-exhaust/91397/2 "2005-12-26T01:17:50Z")
I hate you. ---
**Author:** ![reconJDM](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reconjdm/32/5510_2.png) [@reconJDM](https://forums.speedlife.net/u/reconJDM)\ **Post date:** [December 26, 2005, 3:07am UTC](https://forums.speedlife.net/t/for-trade-bee-r-exhaust/91397/3 "2005-12-26T03:07:34Z")
pm’d ---
**Author:** ![BlitzSix](https://avatars.discourse-cdn.com/v4/letter/b/dec6dc/32.png) [@BlitzSix](https://forums.speedlife.net/u/BlitzSix)\ **Post date:** [December 30, 2005, 1:43pm UTC](https://forums.speedlife.net/t/for-trade-bee-r-exhaust/91397/4 "2005-12-30T13:43:15Z")
Replying to all PMs right now, here are the pics, send offers please! ![http://www.performancescene.net/fs/beer/beer1.jpg](http://www.performancescene.net/fs/beer/beer1.jpg) ![http://www.performancescene.net/fs/beer/beer2.jpg](http://www.performancescene.net/fs/beer/beer2.jpg) In this next picture you can kind of see where at the left part of the muffler it’s scratched form the bottom, it’s actually a little worse than that I forgot to take the pic of the underside, but basically where you see it dent a little it’s like that but a bit deeper. Maybe 1 cm total different from where it should be if it were perfect and how it is because of the scraping. ![http://www.performancescene.net/fs/beer/beer3.jpg](http://www.performancescene.net/fs/beer/beer3.jpg) ![http://www.performancescene.net/fs/beer/beer4.jpg](http://www.performancescene.net/fs/beer/beer4.jpg) ![http://www.performancescene.net/fs/beer/beer5.jpg](http://www.performancescene.net/fs/beer/beer5.jpg) ![http://www.performancescene.net/fs/beer/beer6.jpg](http://www.performancescene.net/fs/beer/beer6.jpg)