# Ford 6.0 Diesel basic mods **URL:** \ **Category:** Shift518 Automotive\ **Created:** [February 2, 2009, 8:30pm UTC](https://forums.speedlife.net/t/ford-6-0-diesel-basic-mods/241788 "2009-02-02T20:30:58Z")\ **Posts on this page:** 1\ **Showing post:** 85
**Author:** ![Jammer](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jammer/32/6349_2.png) [@Jammer](https://forums.speedlife.net/u/Jammer)\ **Post date:** [February 5, 2009, 8:04am UTC](https://forums.speedlife.net/t/ford-6-0-diesel-basic-mods/241788/85 "2009-02-05T08:04:34Z")
> [@chemical weapons found in Iraq?](https://forums.speedlife.net/t/chemical-weapons-found-in-iraq/13615/47): > > in my opinion, I would stay clear of edge products, I had a lot of trouble in the past with their product and the only solution was a dealer reflash of the ecu. And no this was not an isolated case it happened 3 times on different makes. And bullydog makes a decent programmer as long as you don’t have any troubles. The tech line is usually jammed for at least 20 minutes every time i have called. We have had the best luck with rbp wich is a programmer tuned by ppe. They make good power and seem to be safe, since the tranny head gaskets and turbo seals have been known to fail on these vehicles just do some small stuff and you will be fine. I’d like to probably limit the mods as its sorta a daily driver for the moment… programmer +intake…maybe exhaust…thats about it. --- _[View the full topic](https://forums.speedlife.net/t/ford-6-0-diesel-basic-mods/241788)._