# Found an oops... **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [July 12, 2008, 5:32am UTC](https://forums.speedlife.net/t/found-an-oops/198500 "2008-07-12T05:32:10Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [July 12, 2008, 5:32am UTC](https://forums.speedlife.net/t/found-an-oops/198500/1 "2008-07-12T05:32:10Z")
Took the blue vette to PRP last weekend, everything seemed fine… but noticed the pass. side bank poppin almost like a miss. Revved up fine, didnt get hot or anything, so I ran it. Maiden voyage, 10.73 @ 125… foot braked it and short shifted it. Noticed it breaking up a little after the 2-3 shift. 2nd pass… was breaking up worse, so just shut it off. Brought it back, pulled valve covers and found 2 of these: ![http://img.photobucket.com/albums/v123/gearhead313/IMG_6603.jpg](http://img.photobucket.com/albums/v123/gearhead313/IMG_6603.jpg) ![http://img.photobucket.com/albums/v123/gearhead313/IMG_6602.jpg](http://img.photobucket.com/albums/v123/gearhead313/IMG_6602.jpg) rockers just spit the roller bearings all over the place! Some of the others were loose as well. Anyone ever see this kinda failure? This is a 482ci, 800 lift cam, mag. pushrods, double wound race springs, etc. Ended up buying wide body race crane rockers for like 445$ :rant: Can you buy individual rockers? I have good ones left, would work for a street car… ---
**Author:** ![slowcamaro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slowcamaro/32/5975_2.png) [@slowcamaro](https://forums.speedlife.net/u/slowcamaro)\ **Post date:** [July 12, 2008, 5:54am UTC](https://forums.speedlife.net/t/found-an-oops/198500/2 "2008-07-12T05:54:46Z")
are those harland sharps…if yes then you can from harland sharp ---
**Author:** ![SixSpeed454SS](https://avatars.discourse-cdn.com/v4/letter/s/e19adc/32.png) [@SixSpeed454SS](https://forums.speedlife.net/u/SixSpeed454SS)\ **Post date:** [July 12, 2008, 5:57am UTC](https://forums.speedlife.net/t/found-an-oops/198500/3 "2008-07-12T05:57:12Z")
Ouch. Looks like they couldn’t handle the spring pressure. What ratio are they? ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [July 12, 2008, 6:26am UTC](https://forums.speedlife.net/t/found-an-oops/198500/4 "2008-07-12T06:26:43Z")
damn ---
**Author:** ![imported\_SINISTER](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_sinister/32/5970_2.png) [@imported\_SINISTER](https://forums.speedlife.net/u/imported_SINISTER)\ **Post date:** [July 12, 2008, 6:41am UTC](https://forums.speedlife.net/t/found-an-oops/198500/5 "2008-07-12T06:41:46Z")
> [@looking into plowing](https://forums.speedlife.net/t/looking-into-plowing/37100/17): > > are those harland sharps…if yes then you can from harland sharp are harland sharps guranteed? i know this happend recently to another member and contact harland and they sent him new ones… i cant view the pic but i know he snapp the rocker in half ---
**Author:** ![7.5hotrod](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/7.5hotrod/32/5993_2.png) [@7.5hotrod](https://forums.speedlife.net/u/7.5hotrod)\ **Post date:** [July 12, 2008, 8:22am UTC](https://forums.speedlife.net/t/found-an-oops/198500/6 "2008-07-12T08:22:15Z")
Wow, that sucks, i have found that the sharp rockers have very narrown needle bearings in the fulcrum, I killed a set on my big block just street running it with 280lbs on the spring seat… I went to a set of crower S/S and am very happy… ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [July 12, 2008, 9:10am UTC](https://forums.speedlife.net/t/found-an-oops/198500/7 "2008-07-12T09:10:50Z")
that sucks ---
**Author:** ![69camaro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/69camaro/32/6046_2.png) [@69camaro](https://forums.speedlife.net/u/69camaro)\ **Post date:** [July 12, 2008, 12:45pm UTC](https://forums.speedlife.net/t/found-an-oops/198500/8 "2008-07-12T12:45:14Z")
> [@looking into plowing](https://forums.speedlife.net/t/looking-into-plowing/37100/17): > > are those harland sharps…if yes then you can from harland sharp those actually look like crane cams gold rockers to me. ---
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [July 12, 2008, 1:02pm UTC](https://forums.speedlife.net/t/found-an-oops/198500/9 "2008-07-12T13:02:02Z")
yeah, they are crane gold race’s. I talked to summit and they said there was no warrenty on race parts. They are 1.7 ratio. The valve springs are 230lb seat pressure. ---
**Author:** ![fmfkid250](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fmfkid250/32/5973_2.png) [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)\ **Post date:** [July 12, 2008, 2:25pm UTC](https://forums.speedlife.net/t/found-an-oops/198500/10 "2008-07-12T14:25:39Z")
10.7 is slow ---
**Author:** ![1badx](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1badx/32/6052_2.png) [@1badx](https://forums.speedlife.net/u/1badx)\ **Post date:** [July 12, 2008, 2:45pm UTC](https://forums.speedlife.net/t/found-an-oops/198500/11 "2008-07-12T14:45:11Z")
> [@\*\*\*\*\*Official: Mighty Meet Thread\*\*\*\*\*](https://forums.speedlife.net/t/official-mighty-meet-thread/10918/2658): > > 10.7 is slow Ouch! That comment hurts! ---
**Author:** ![SmokinDiesel](https://avatars.discourse-cdn.com/v4/letter/s/57b2e6/32.png) [@SmokinDiesel](https://forums.speedlife.net/u/SmokinDiesel)\ **Post date:** [July 12, 2008, 5:11pm UTC](https://forums.speedlife.net/t/found-an-oops/198500/12 "2008-07-12T17:11:18Z")
Ouch … Sorry to see that ---
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [July 12, 2008, 7:52pm UTC](https://forums.speedlife.net/t/found-an-oops/198500/13 "2008-07-12T19:52:43Z")
might go out next weekend to see if everything’s ok ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [July 12, 2008, 9:52pm UTC](https://forums.speedlife.net/t/found-an-oops/198500/14 "2008-07-12T21:52:23Z")
what vette? i want pictures. ---
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [July 13, 2008, 4:50am UTC](https://forums.speedlife.net/t/found-an-oops/198500/15 "2008-07-13T04:50:59Z")
[ame=“[http://myspacetv.com/index.cfm?fuseaction=vids.individual&videoid=11405302](http://myspacetv.com/index.cfm?fuseaction=vids.individual&videoid=11405302)”]MySpaceTV Videos: J’s Stingray by Chad No L[/ame] ![http://img.photobucket.com/albums/v123/gearhead313/Race%20Vette/IMG_6604.jpg](http://img.photobucket.com/albums/v123/gearhead313/Race%20Vette/IMG_6604.jpg) ![http://img.photobucket.com/albums/v123/gearhead313/Race%20Vette/IMG_6607.jpg](http://img.photobucket.com/albums/v123/gearhead313/Race%20Vette/IMG_6607.jpg) ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [July 13, 2008, 4:59am UTC](https://forums.speedlife.net/t/found-an-oops/198500/16 "2008-07-13T04:59:22Z")
very nice. just don’t pull a mark hamill like in corvette summer 🤣 ---
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [July 14, 2008, 8:23am UTC](https://forums.speedlife.net/t/found-an-oops/198500/17 "2008-07-14T08:23:16Z")
QUALITY call on corvette summer! ---
**Author:** ![imported\_SINISTER](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_sinister/32/5970_2.png) [@imported\_SINISTER](https://forums.speedlife.net/u/imported_SINISTER)\ **Post date:** [July 14, 2008, 8:32am UTC](https://forums.speedlife.net/t/found-an-oops/198500/18 "2008-07-14T08:32:18Z")
> [@Cuban "Welfare" Crisis - Found Him! \*VIDS INSIDE\*](https://forums.speedlife.net/t/cuban-welfare-crisis-found-him-vids-inside/31740/31): > > yeah, they are crane gold race’s. I talked to summit and they said there was no warrenty on race parts. > > They are 1.7 ratio. The valve springs are 230lb seat pressure. i dunno about that…shoot a pm to amswell…he snapped one and had a set on the way the next day harlan shap carries a lifetime gurantee againts defects…on there website worth a call ---
**Author:** ![4doors5gears](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/4doors5gears/32/6006_2.png) [@4doors5gears](https://forums.speedlife.net/u/4doors5gears)\ **Post date:** [July 14, 2008, 9:16am UTC](https://forums.speedlife.net/t/found-an-oops/198500/19 "2008-07-14T09:16:55Z")
> [@exotic run 2005 PICS](https://forums.speedlife.net/t/exotic-run-2005-pics/37063/18): > > very nice. > > just don’t pull a mark hamill like in corvette summer 🤣 > [@Luxury SUV Opinions wanted....](https://forums.speedlife.net/t/luxury-suv-opinions-wanted/37041/20): > > QUALITY call on corvette summer! Great movie. The black T/A in that movie was sweet too. ---
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [July 14, 2008, 12:44pm UTC](https://forums.speedlife.net/t/found-an-oops/198500/20 "2008-07-14T12:44:33Z")
> [@On another topic](https://forums.speedlife.net/t/36970/66): > > i dunno about that…shoot a pm to amswell…he snapped one and had a set on the way the next day > > harlan shap carries a lifetime gurantee againts defects…on there website > > worth a call I guess its worth a shot. At least they could be used on something else then. …the summit guy though was pretty certain sounding that there’s no love at all for racing parts. :dunno: [Next page](https://forums.speedlife.net/t/found-an-oops/198500.md?page=2)