# Front control arm bushings **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [October 12, 2006, 2:29pm UTC](https://forums.speedlife.net/t/front-control-arm-bushings/18816 "2006-10-12T14:29:39Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Chrish](https://avatars.discourse-cdn.com/v4/letter/c/6de8d8/32.png) [@Chrish](https://forums.speedlife.net/u/Chrish)\ **Post date:** [October 12, 2006, 2:29pm UTC](https://forums.speedlife.net/t/front-control-arm-bushings/18816/1 "2006-10-12T14:29:39Z")
I just dropped the front suspension in my camaro, I was looking at the bushings and noticed that the old rubber ones were pretty shot! I decided to go with some new poly bushings but getting the old ones out is turning out to be a huge pain. I talked to someone already and they said that the metal bushing sleeve is most likely rusted to the bolt, which makes sense because I can get the nuts off of all the bolts, but none of the bolts will even spin. Any suggestions? Will heating them up help? ---
**Author:** ![nitroinsane](https://avatars.discourse-cdn.com/v4/letter/n/d26b3c/32.png) [@nitroinsane](https://forums.speedlife.net/u/nitroinsane)\ **Post date:** [October 13, 2006, 4:17am UTC](https://forums.speedlife.net/t/front-control-arm-bushings/18816/2 "2006-10-13T04:17:09Z")
yes it will if u can get to the nuts can u get to the top iof the bolts with a hammer ---
**Author:** ![BaD\_AZz\_Z\_28](https://avatars.discourse-cdn.com/v4/letter/b/f04885/32.png) [@BaD\_AZz\_Z\_28](https://forums.speedlife.net/u/BaD_AZz_Z_28)\ **Post date:** [October 13, 2006, 5:54am UTC](https://forums.speedlife.net/t/front-control-arm-bushings/18816/3 "2006-10-13T05:54:10Z")
Those get rusted on HARD. I would recommend a 1/2 impact & some prayers, or a torch and try not to mind the smell