# Frozen Rotors
**URL:** https://forums.speedlife.net/t/frozen-rotors/81405
**Category:** SON240sx Automotive
**Created:** [August 9, 2004, 11:09am UTC](https://forums.speedlife.net/t/frozen-rotors/81405 "2004-08-09T11:09:16Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@Sven](https://forums.speedlife.net/u/Sven)
#### Post date: [August 9, 2004, 11:09am UTC](https://forums.speedlife.net/t/frozen-rotors/81405/1 "2004-08-09T11:09:16Z")
Switching my rotors …
Old ones are stuck on good!
Been banging from behind with a hammer for a bit, can’t seem to knock em loose.
Any novel ideas ?
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [August 9, 2004, 11:18am UTC](https://forums.speedlife.net/t/frozen-rotors/81405/2 "2004-08-09T11:18:58Z")
DUDE
use the slug, I can come by to help but not untill about 6ish
---
### Author:  [@Sven](https://forums.speedlife.net/u/Sven)
#### Post date: [August 9, 2004, 11:35am UTC](https://forums.speedlife.net/t/frozen-rotors/81405/3 "2004-08-09T11:35:20Z")
> [@Benson240sx](#):
>
> DUDE
> use the slug, I can come by to help but not untill about 6ish
ugh you might have to swing by.
I need someone fatter to swing 😉
hah hahaha
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [August 9, 2004, 11:44am UTC](https://forums.speedlife.net/t/frozen-rotors/81405/4 "2004-08-09T11:44:29Z")
AAAAAAAAAAAAAA that is a low blow.
speaking of you gir…
just kidding 🙂
ya I can by after work if you want. do you need a ride to jackass tors!!!
---
### Author:  [@Titan](https://forums.speedlife.net/u/Titan)
#### Post date: [August 9, 2004, 11:51am UTC](https://forums.speedlife.net/t/frozen-rotors/81405/5 "2004-08-09T11:51:52Z")
Heating with a torch before knocking them is the only way I got mine off. You could try heating them with a propane torch, it might help a small amount.
---
### Author:  [@MRWmotorsports](https://forums.speedlife.net/u/MRWmotorsports)
#### Post date: [August 9, 2004, 1:20pm UTC](https://forums.speedlife.net/t/frozen-rotors/81405/6 "2004-08-09T13:20:03Z")
There should be two m8 x 1.25 threaded holes in them, screw in two bolts and this should pull the rotors off. Sometimes they are so tight I’ve seen them break in half though…
-Martin.
---
### Author:  [@Sven](https://forums.speedlife.net/u/Sven)
#### Post date: [August 9, 2004, 4:33pm UTC](https://forums.speedlife.net/t/frozen-rotors/81405/7 "2004-08-09T16:33:58Z")
Sorry forgot to post … knocked em off eventually with the slug.