# FS: 1/2" header flanges, to your specs, limited material available

**URL:** <https://forums.speedlife.net/t/fs-1-2-header-flanges-to-your-specs-limited-material-available/60241>\
**Category:** Classifieds\
**Created:** [December 24, 2008, 6:03pm UTC](https://forums.speedlife.net/t/fs-1-2-header-flanges-to-your-specs-limited-material-available/60241 "2008-12-24T18:03:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![HotRodKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hotrodkid/32/7609_2.png) [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)\
**Post date:** [December 24, 2008, 6:03pm UTC](https://forums.speedlife.net/t/fs-1-2-header-flanges-to-your-specs-limited-material-available/60241/1 "2008-12-24T18:03:27Z")

</div>

i have a good sized piece of 1/2" material i want to use up, its approx 36" x 18" which is big enough for about 9 sets of v6 flanges. i personally need 2 sets, so the rest of the material is just extra,

the material has one nice side and one some what scratched side, and both sides have been cleaned up w/ a sanding disk on a grinder. a pass or 2 w/ a belt sander would net a nice neat appearance. the surface finish is no rougher then a normal machined finish, so there wont be any sealing probs

i can convert a scan of a exhaust gasket into a cad file, as long as im given reference measurements in the process so i can scale it properly

anyone interested ?

---

<div class="post-metadata">

**Author:** ![xklibur9](https://avatars.discourse-cdn.com/v4/letter/x/f0a364/32.png) [@xklibur9](https://forums.speedlife.net/u/xklibur9)\
**Post date:** [December 26, 2008, 6:06pm UTC](https://forums.speedlife.net/t/fs-1-2-header-flanges-to-your-specs-limited-material-available/60241/2 "2008-12-26T18:06:15Z")

</div>

I have cad files of flanges I would like, but how much?