# FS: 18X9.5 +12 5X114.3 **URL:** \ **Category:** Classifieds\ **Created:** [December 5, 2008, 7:30pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602 "2008-12-05T19:30:43Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![Jersey\_Fresh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jersey_fresh/32/6418_2.png) [@Jersey\_Fresh](https://forums.speedlife.net/u/Jersey_Fresh)\ **Post date:** [December 15, 2008, 7:04pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/21 "2008-12-15T19:04:12Z")
> [@Mowgli](#): > > $400 for four? What size lips is there? If so, you might have a set sold. yea 400 for 4, the lip is 3" ---
**Author:** ![snoopysnooper](https://avatars.discourse-cdn.com/v4/letter/s/74df32/32.png) [@snoopysnooper](https://forums.speedlife.net/u/snoopysnooper)\ **Post date:** [December 15, 2008, 7:45pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/22 "2008-12-15T19:45:06Z")
dude, if you can do p;ayment plans for a past buyer and loacal, let me know i need me a set of shoes for the summah when i drop the four ---
**Author:** ![Jersey\_Fresh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jersey_fresh/32/6418_2.png) [@Jersey\_Fresh](https://forums.speedlife.net/u/Jersey_Fresh)\ **Post date:** [December 15, 2008, 7:51pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/23 "2008-12-15T19:51:11Z")
> [@snoopysnooper](#): > > dude, if you can do p;ayment plans for a past buyer and loacal, let me know > > i need me a set of shoes for the summah when i drop the four wont fit an audi ---
**Author:** ![McBitchin](https://avatars.discourse-cdn.com/v4/letter/m/ecc23a/32.png) [@McBitchin](https://forums.speedlife.net/u/McBitchin)\ **Post date:** [December 15, 2008, 8:58pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/24 "2008-12-15T20:58:18Z")
> [@JVG Motorsports](#): > > That wheel is never going to work on a FWD Civic :nono Major body modification esp with the edition of a tire on said rim. people have fit 9.5" on our car’s just need to flare the front fender a bit and have a slight negative camber. It’s been done before but with a much higher offset wheel. Hence why I would like to test fit. > [@cazwrx187](#): > > But it would work on his 240 :ninja wat? I have a motor/tranny/ecu for a 240 but I can’t find a good condish shell. I also have a built 350 minus the heads and carbs I’m not doing anything with at the moment though so… ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [December 15, 2008, 9:01pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/25 "2008-12-15T21:01:59Z")
Dude I found a clean 90 coupe shell for like $500 here in California Bay Area, I even quoted shipping, ~$900. The thing is damn clean too, but gutted. I’m waiting to find a 91+ shell… gutted or not, I got a doner car sitting in my barn now :lol ---
**Author:** ![McBitchin](https://avatars.discourse-cdn.com/v4/letter/m/ecc23a/32.png) [@McBitchin](https://forums.speedlife.net/u/McBitchin)\ **Post date:** [December 15, 2008, 9:04pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/26 "2008-12-15T21:04:25Z")
fo-real! In like 4-5 weeks I’ll have that kind of $$$$ but i dont exactly have $900 at the moment :headbang ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [December 15, 2008, 9:07pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/27 "2008-12-15T21:07:56Z")
Check out craigslist, alot of 240s out here. Unfortunately I’m going back to NY Sunday… ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [December 15, 2008, 9:08pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/28 "2008-12-15T21:08:40Z")
Back on topic though, I might pick up a set of these wheels in the spring if they are still around. ---
**Author:** ![McBitchin](https://avatars.discourse-cdn.com/v4/letter/m/ecc23a/32.png) [@McBitchin](https://forums.speedlife.net/u/McBitchin)\ **Post date:** [December 15, 2008, 9:09pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/29 "2008-12-15T21:09:00Z")
word I check pretty regularly but they all seem to be rusted out, i dont care if the body looks beat but frame rot is a big :nono ---
**Author:** ![JVG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jvg/32/6348_2.png) [@JVG](https://forums.speedlife.net/u/JVG)\ **Post date:** [December 15, 2008, 9:12pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/30 "2008-12-15T21:12:27Z")
> [@McBitchin](#): > > people have fit 9.5" on our car’s just need to flare the front fender a bit and have a slight negative camber. It’s been done before but with a much higher offset wheel. Hence why I would like to test fit. > > wat? I have a motor/tranny/ecu for a 240 but I can’t find a good condish shell. I also have a built 350 minus the heads and carbs I’m not doing anything with at the moment though so… a +12 offset on and 18x9.5 is going to = Fail, It would have worked on a 240 or a civic with a widebody :ssh ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [December 15, 2008, 9:12pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/31 "2008-12-15T21:12:48Z")
> [@McBitchin](#): > > word I check pretty regularly but they all seem to be rusted out, i dont care if the body looks beat but frame rot is a big :nono Check your email. ---
**Author:** ![McBitchin](https://avatars.discourse-cdn.com/v4/letter/m/ecc23a/32.png) [@McBitchin](https://forums.speedlife.net/u/McBitchin)\ **Post date:** [December 15, 2008, 9:13pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/32 "2008-12-15T21:13:25Z")
> [@JVG Motorsports](#): > > a +12 offset on and 18x9.5 is going to = Fail most likely, the only person who made it work had like a +40 offset or somthing, test fitting can’t hurt. ---
**Author:** ![SRS\_BZNS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/srs_bzns/32/6375_2.png) [@SRS\_BZNS](https://forums.speedlife.net/u/SRS_BZNS)\ **Post date:** [December 16, 2008, 1:07pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/33 "2008-12-16T13:07:32Z")
my las tquestion was not answered but that is ok. answer this one though. Will this clear large calipers? ---
**Author:** ![Jersey\_Fresh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jersey_fresh/32/6418_2.png) [@Jersey\_Fresh](https://forums.speedlife.net/u/Jersey_Fresh)\ **Post date:** [December 16, 2008, 1:28pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/34 "2008-12-16T13:28:18Z")
> [@SRS BZNS](#): > > my las tquestion was not answered but that is ok. > > answer this one though. > > Will this clear large calipers? For your 1st question… ill sell however many you want… 2. 4. 6… all dont matter, and as far as clearing large calipers, it depends on the car… The set of the same wheels that i ran on my S14 track car had a big brake kit on it and it cleared just fine ---
**Author:** ![SRS\_BZNS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/srs_bzns/32/6375_2.png) [@SRS\_BZNS](https://forums.speedlife.net/u/SRS_BZNS)\ **Post date:** [December 16, 2008, 1:34pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/35 "2008-12-16T13:34:40Z")
if it clears s14 big brake i will be fine. I will get with you next month ---
**Author:** ![Norwood](https://avatars.discourse-cdn.com/v4/letter/n/b4bc9f/32.png) [@Norwood](https://forums.speedlife.net/u/Norwood)\ **Post date:** [December 16, 2008, 2:19pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/36 "2008-12-16T14:19:23Z")
> [@ninety1two40](#): > > damn nice wheels :lol GLWS Why dont you get a set of these Steve? They would look sick on your car. :nod ---
**Author:** ![Mowgli](https://avatars.discourse-cdn.com/v4/letter/m/7c8e57/32.png) [@Mowgli](https://forums.speedlife.net/u/Mowgli)\ **Post date:** [December 16, 2008, 2:51pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/37 "2008-12-16T14:51:46Z")
Willing to ship these? ---
**Author:** ![Jersey\_Fresh](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jersey_fresh/32/6418_2.png) [@Jersey\_Fresh](https://forums.speedlife.net/u/Jersey_Fresh)\ **Post date:** [December 16, 2008, 2:53pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/38 "2008-12-16T14:53:30Z")
> [@Mowgli](#): > > Willing to ship these? at buyers expense, yes ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [December 16, 2008, 5:51pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/39 "2008-12-16T17:51:05Z")
> [@Norwood](#): > > Why dont you get a set of these Steve? They would look sick on your car. :nod Cause I just bought a set of wheels with tires :lol If he still has a set laying around in the spring, I might pick them up. I have more important things to spend money on right now. ---
**Author:** ![Norwood](https://avatars.discourse-cdn.com/v4/letter/n/b4bc9f/32.png) [@Norwood](https://forums.speedlife.net/u/Norwood)\ **Post date:** [December 16, 2008, 5:53pm UTC](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602/40 "2008-12-16T17:53:18Z")
> [@ninety1two40](#): > > Cause I just bought a set of wheels with tires :lol > > If he still has a set laying around in the spring, I might pick them up. I have more important things to spend money on right now. Oh nice what did you end up getting? [Previous page](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602.md?page=1) [Next page](https://forums.speedlife.net/t/fs-18x9-5-12-5x114-3/240602.md?page=3)