# FS: 1986 mustang **URL:** \ **Category:** Classifieds\ **Created:** [May 30, 2007, 8:58am UTC](https://forums.speedlife.net/t/fs-1986-mustang/146942 "2007-05-30T08:58:30Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Cavey](https://avatars.discourse-cdn.com/v4/letter/c/ecb155/32.png) [@Cavey](https://forums.speedlife.net/u/Cavey)\ **Post date:** [May 30, 2007, 8:58am UTC](https://forums.speedlife.net/t/fs-1986-mustang/146942/1 "2007-05-30T08:58:30Z")
new 306 block, GT40P heads worked over by Western Motorsports, 1.7rr’s, edelbrock carb, weiand xcellerator intake, edelbrock victor series mechanical race pump, stock roller cam, FRPP C springs, FRPP 3.73 gears, DIY twin turbo blowthrough setup with two garrett .48 turbo’s set at 7.5psi, AEM wideband controller w/guage, ebay BOV, Mallory adjustable FPR, T-Tops have new weather stripping. the bad: Blew a headgasket and overheated. I replaced the gaskets with felpro 9333;s but it was too late. Now there is blow by and low compression. The engine has under 500km’s on it and needs new rings. I have the engine out and ready for rings. It needs to be tuned as it was running real rich. would like to get $5000.00 for it all. **Make me an offer**. located in Rocky mountain House, phone 403-844-2132 car has a black scoop on the hood now. ![http://i101.photobucket.com/albums/m68/cavey_03/86gt.jpg](http://i101.photobucket.com/albums/m68/cavey_03/86gt.jpg) ---
**Author:** ![Red\_To\_Rip](https://avatars.discourse-cdn.com/v4/letter/r/7cd45c/32.png) [@Red\_To\_Rip](https://forums.speedlife.net/u/Red_To_Rip)\ **Post date:** [May 30, 2007, 2:06pm UTC](https://forums.speedlife.net/t/fs-1986-mustang/146942/2 "2007-05-30T14:06:34Z")
pmd ---
**Author:** ![JoshB1](https://avatars.discourse-cdn.com/v4/letter/j/8491ac/32.png) [@JoshB1](https://forums.speedlife.net/u/JoshB1)\ **Post date:** [June 1, 2007, 4:29pm UTC](https://forums.speedlife.net/t/fs-1986-mustang/146942/3 "2007-06-01T16:29:16Z")
engine pis?