# FS: 1989 180sx (Needs work) \*\*SOLD\*\* **URL:** \ **Category:** Classifieds\ **Created:** [July 24, 2006, 2:32pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445 "2006-07-24T14:32:45Z")\ **Posts on this page:** 18\ **Page:** 1
**Author:** ![Fergy](https://avatars.discourse-cdn.com/v4/letter/f/a4c791/32.png) [@Fergy](https://forums.speedlife.net/u/Fergy)\ **Post date:** [July 24, 2006, 2:32pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/1 "2006-07-24T14:32:45Z")
CAR IS NOW SOLD Exterior - 240SX Spoiler - 15" Gunmetal NISMO Rims In Rear - 15" 200SX Rims In Front - RSR Downsprings - New 240SX Front End (Flip Ups) Interior - Power Locks - Greddy Turbo Timer - Momo Race Wheel - RAZO Shift Knob Engine - SR20DET Redtop Motor w/ 6?xxx KM’s - Engine has had every gasket and seal replaced. - NISMO Clutch - Skyline R32 Radiator - 4 Inch Veilside Downpipe - Custom 3 Inch Exhaust - HKS Power Filter - VLSD - Apex’i Front Mount Intercooler - Inline Heater Not sure of the KM of the top of my head right now, maybe around 130xxx on the body, 60-70xxx on the engine. I know I said I was going to fix up this car but I really don’t have the time to do it, and I’m looking for something a bit more suitable for a year round daily driver. This is everything that needs to be fixed: Struts, strut mounts, outer tie rod ends, lower ball joints, front brakes and rotors. Exhaust needs some work, various dents around the car, the interior is great no tears or anything. I’m sure a lot of you know more about it than I do so anything anyone thinks should be added go ahead. I’m in Hinton Alberta and I probably won’t drive it anywhere to show it, unless I get a 100% guarantee it’s going to be sold, which won’t happen. I’m asking 3500obo. ![http://img.photobucket.com/albums/v652/OuterShell/media6.jpg](http://img.photobucket.com/albums/v652/OuterShell/media6.jpg) ![http://img.photobucket.com/albums/v652/OuterShell/media7.jpg](http://img.photobucket.com/albums/v652/OuterShell/media7.jpg) ![http://img.photobucket.com/albums/v652/OuterShell/media4.jpg](http://img.photobucket.com/albums/v652/OuterShell/media4.jpg) Some older pics to give you an idea. These are before I straightened out the front bumper, you can’t really tell in these pictures anyways. But I can take new ones if anyone’s interested. Serious offers only please. ---
**Author:** ![Garret\_Volden](https://avatars.discourse-cdn.com/v4/letter/g/f475e1/32.png) [@Garret\_Volden](https://forums.speedlife.net/u/Garret_Volden)\ **Post date:** [July 24, 2006, 2:39pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/2 "2006-07-24T14:39:48Z")
i am interested Did u rebuild the motor? ---
**Author:** ![disco\_240sx](https://avatars.discourse-cdn.com/v4/letter/d/b782af/32.png) [@disco\_240sx](https://forums.speedlife.net/u/disco_240sx)\ **Post date:** [July 24, 2006, 2:47pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/3 "2006-07-24T14:47:01Z")
im interested what was wrong with the front was it in a collision if so any frame damage and is the OOP done… ---
**Author:** ![Fergy](https://avatars.discourse-cdn.com/v4/letter/f/a4c791/32.png) [@Fergy](https://forums.speedlife.net/u/Fergy)\ **Post date:** [July 24, 2006, 2:47pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/4 "2006-07-24T14:47:50Z")
I was told when I bought it that the motor was put in brand new. I personally haven’t rebuilt it and I’m not sure if the previous owner did or not. Anyone know if Josh rebuilt it…? ---
**Author:** ![Garret\_Volden](https://avatars.discourse-cdn.com/v4/letter/g/f475e1/32.png) [@Garret\_Volden](https://forums.speedlife.net/u/Garret_Volden)\ **Post date:** [July 24, 2006, 2:49pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/5 "2006-07-24T14:49:30Z")
> [@Garret\_Volden](#): > > i am interested > Did u rebuild the motor? \*i mean did you rebuild it or did somebody else do it. ---
**Author:** ![Fergy](https://avatars.discourse-cdn.com/v4/letter/f/a4c791/32.png) [@Fergy](https://forums.speedlife.net/u/Fergy)\ **Post date:** [July 24, 2006, 2:49pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/6 "2006-07-24T14:49:51Z")
It won’t pass OOP until those parts I listed are fixed. [http://www.n-e-c-c.com/forum/viewtopic.php?t=5756&highlight=](http://www.n-e-c-c.com/forum/viewtopic.php?t=5756&highlight=) This thread has some more info on the history of the car. While I was told the front end was replaced after the original head lights were vandalized, it seems an unlikely story after more I found out about it. ---
**Author:** ![Fergy](https://avatars.discourse-cdn.com/v4/letter/f/a4c791/32.png) [@Fergy](https://forums.speedlife.net/u/Fergy)\ **Post date:** [July 24, 2006, 2:50pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/7 "2006-07-24T14:50:33Z")
> [@Garret\_Volden](#): > > [quote=Garret\_Volden]i am interested > Did u rebuild the motor? \*i mean did you rebuild it or did somebody else do it.[/quote] No somebody else did it. ---
**Author:** ![Garret\_Volden](https://avatars.discourse-cdn.com/v4/letter/g/f475e1/32.png) [@Garret\_Volden](https://forums.speedlife.net/u/Garret_Volden)\ **Post date:** [July 24, 2006, 3:04pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/8 "2006-07-24T15:04:34Z")
thats kool,i am really interwested in it this but i have lots of shiznaz to do right now so maybe this weekend i will come to hinton. i live in whitecourt so it wont take long to get there. ---
**Author:** ![baker\_jeff](https://avatars.discourse-cdn.com/v4/letter/b/0ea827/32.png) [@baker\_jeff](https://forums.speedlife.net/u/baker_jeff)\ **Post date:** [July 24, 2006, 3:31pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/9 "2006-07-24T15:31:23Z")
Thats a good deal. I’d buy it as a project if I had the money. Shouldnt have a hard time selling. ---
**Author:** ![Fergy](https://avatars.discourse-cdn.com/v4/letter/f/a4c791/32.png) [@Fergy](https://forums.speedlife.net/u/Fergy)\ **Post date:** [July 24, 2006, 3:42pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/10 "2006-07-24T15:42:09Z")
Ya I’ve got quite a bit of interest already. I just really need something that’s ready to go right away, I don’t have the time to put into this. Garret just PM when you’d be able to come out to see it, it looks like it could be gone by this weekend. ---
**Author:** ![gareth](https://avatars.discourse-cdn.com/v4/letter/g/ba8739/32.png) [@gareth](https://forums.speedlife.net/u/gareth)\ **Post date:** [July 24, 2006, 11:59pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/11 "2006-07-24T23:59:58Z")
:o i want it pm’d edit: since this car has been registered and insured (i assume it was as josh owned/drove it for a while), wouldn’t an OOP inspection not be necessary? wouldn’t a basic safety inspection cover it? also, would you consider a trade + cash for my 1988 civic wagon 😃 ? ---
**Author:** ![Fergy](https://avatars.discourse-cdn.com/v4/letter/f/a4c791/32.png) [@Fergy](https://forums.speedlife.net/u/Fergy)\ **Post date:** [July 25, 2006, 1:38am UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/12 "2006-07-25T01:38:22Z")
Ya that’s right. Still won’t pass the safety insp. in this condition though. And it’s gonna need a wheel alignment anyways I bet, so that’s basically an OOP anyways. And sorry, not interested in that trade. 😛 ---
**Author:** ![Fergy](https://avatars.discourse-cdn.com/v4/letter/f/a4c791/32.png) [@Fergy](https://forums.speedlife.net/u/Fergy)\ **Post date:** [July 25, 2006, 2:28pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/13 "2006-07-25T14:28:55Z")
Interior pics by request. Engine bay pics later today. ![http://img.photobucket.com/albums/v652/OuterShell/int3.jpg](http://img.photobucket.com/albums/v652/OuterShell/int3.jpg) ![http://img.photobucket.com/albums/v652/OuterShell/int4.jpg](http://img.photobucket.com/albums/v652/OuterShell/int4.jpg) ![http://img.photobucket.com/albums/v652/OuterShell/int2.jpg](http://img.photobucket.com/albums/v652/OuterShell/int2.jpg) ![http://img.photobucket.com/albums/v652/OuterShell/int1.jpg](http://img.photobucket.com/albums/v652/OuterShell/int1.jpg) ![http://img.photobucket.com/albums/v652/OuterShell/media7.jpg](http://img.photobucket.com/albums/v652/OuterShell/media7.jpg) ![http://img.photobucket.com/albums/v652/OuterShell/int5.jpg](http://img.photobucket.com/albums/v652/OuterShell/int5.jpg) ![http://img.photobucket.com/albums/v652/OuterShell/media8.jpg](http://img.photobucket.com/albums/v652/OuterShell/media8.jpg) ![http://img.photobucket.com/albums/v652/OuterShell/media2.jpg](http://img.photobucket.com/albums/v652/OuterShell/media2.jpg) ---
**Author:** ![drader](https://avatars.discourse-cdn.com/v4/letter/d/9dc877/32.png) [@drader](https://forums.speedlife.net/u/drader)\ **Post date:** [July 25, 2006, 3:33pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/14 "2006-07-25T15:33:05Z")
Interested… What kind of rust does it have? ---
**Author:** ![rb25ceffy](https://avatars.discourse-cdn.com/v4/letter/r/97f17d/32.png) [@rb25ceffy](https://forums.speedlife.net/u/rb25ceffy)\ **Post date:** [July 25, 2006, 4:38pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/15 "2006-07-25T16:38:09Z")
It’s a rare nismo bread of rust ---
**Author:** ![Fergy](https://avatars.discourse-cdn.com/v4/letter/f/a4c791/32.png) [@Fergy](https://forums.speedlife.net/u/Fergy)\ **Post date:** [July 25, 2006, 7:05pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/16 "2006-07-25T19:05:39Z")
Here’s the engine bay pics. It’s pretty dirty right now and my phone didn’t send all the pictures for some reason, but here’s what I’ve got. ![http://img.photobucket.com/albums/v652/OuterShell/bay1.jpg](http://img.photobucket.com/albums/v652/OuterShell/bay1.jpg) ![http://img.photobucket.com/albums/v652/OuterShell/bay2.jpg](http://img.photobucket.com/albums/v652/OuterShell/bay2.jpg) ![http://img.photobucket.com/albums/v652/OuterShell/bay3.jpg](http://img.photobucket.com/albums/v652/OuterShell/bay3.jpg) ![http://img.photobucket.com/albums/v652/OuterShell/bay4.jpg](http://img.photobucket.com/albums/v652/OuterShell/bay4.jpg) ![http://img.photobucket.com/albums/v652/OuterShell/bay5.jpg](http://img.photobucket.com/albums/v652/OuterShell/bay5.jpg) As for rust, all I can remember now is that there’s minimal rust on the inside edges of the fenders. Nothing super serious that I can think of off the top of my head. ---
**Author:** ![240DRIFTz](https://avatars.discourse-cdn.com/v4/letter/2/bbe5ce/32.png) [@240DRIFTz](https://forums.speedlife.net/u/240DRIFTz)\ **Post date:** [July 26, 2006, 6:00pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/17 "2006-07-26T18:00:01Z")
verrrryyyy interested check pm’s ---
**Author:** ![Fergy](https://avatars.discourse-cdn.com/v4/letter/f/a4c791/32.png) [@Fergy](https://forums.speedlife.net/u/Fergy)\ **Post date:** [July 31, 2006, 5:07pm UTC](https://forums.speedlife.net/t/fs-1989-180sx-needs-work-sold/143445/18 "2006-07-31T17:07:11Z")
SOLD