# FS: 1991 Crashed Skyline, All parts to fix (drift build) **URL:** \ **Category:** Classifieds\ **Created:** [August 25, 2007, 11:58am UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709 "2007-08-25T11:58:42Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![skylinegtr20](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@skylinegtr20](https://forums.speedlife.net/u/skylinegtr20)\ **Post date:** [August 25, 2007, 11:58am UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709/1 "2007-08-25T11:58:42Z")
Hey guys/gals, i have a crashed skyline that i am looking to sell. I was planing on fixing it asap but not sure how much time i will have over the next little while cause im going back to school. I have all parts to fix the car. Except front bumper unless your intrested in a Veilside combat bumper. here is the information on the car… 1991 GTS-t Type-M Imported in April 2007 45,000 kms fully optioned(no sunroof) Digital Climate Control RB20DET 5 Spd Interior 8/10 small gauge holes Exterior 7/10 except front end damage two dents one on either side of the car Engine: Intake 3.5" Downpipe 3.5" Exhaust 4.25" Tip Single Plate Clutch(not sure of brand) New JDM Battery Interior: Razo shift knob Nismo 260 km/h speedo (true kms are 45 000kms, imported with 24 900 kms documented) fonza racing pedal nardi steering wheel kenwood deck aftermarket speakers(havent checked) tinted rear windows Exterior: GTS side skirts Rear valences Racing Hart Rims or GTS-t Rims Veilside front bumper ($450) GTR front Fenders Suspension and footwork: Tein adjustable suspension 2 way differential Cusco front strut tower bar possibly Hicas lockout bar I have all the parts to fix the car. It suffered front end damage when the fellow rear ended a civic. also have changed 2 belts and have one for the serpentine belt. here are the parts that are needed to fix. Front bumper support Rad support(can weld in for buyer) Radiator OEM headlights OEM side markers GTR fenders Front bumper GTS Hood Fan all new belts(except timing belt) The engine runs perfect but not for a long time because it overheats without a rad. There was no structural damage what so ever and this car is not a salvage or write off. It is a very easy fix for someone with a bit of time and the knowledge. previous owner said the car pulled very hard and had no mechanical problems what so ever. He did oil changes every 3000 kms with royal purple 5w30. He also changed all fluids including transmission and bleeded the brakes. there looks to be a small amount of surface rust on the driver side rear fender where the dent is. I have scanned the car and cannot find any other rust. I purchased the car for $4500. I also drove up to Edmonton to pick up the car. I have about $1500 worth of parts that will be included with sale. Im asking $4500 w/o parts OBO semi firm $6000 w/parts ($6200 w/rad support welded) I can deliver to Calgary. (NOTE: this is just a put back together job there will be no welding or shop needed to do anything with this car. Its just a bolt together project. about 5 hours of work MAX) If anyone would like more info on this car please contact me by PM, skylinegtr20@ [hotmail.com](http://hotmail.com), or call me at 403-360-6223(anytime) thanks guys/gals, [http://s124.photobucket.com/albums/p33/Skylinegtr20/tv%20diversity%20unit/](http://s124.photobucket.com/albums/p33/Skylinegtr20/tv%20diversity%20unit/) ---
**Author:** ![D-SportDrifterX](https://avatars.discourse-cdn.com/v4/letter/d/3da27b/32.png) [@D-SportDrifterX](https://forums.speedlife.net/u/D-SportDrifterX)\ **Post date:** [August 25, 2007, 7:43pm UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709/2 "2007-08-25T19:43:57Z")
Quick question … back in the day did u used to have a red ae86 coupe that matched the same red skyline that u have in ur drive way as i have a picutre i swear its of your red skyline and a red ae86. ---
**Author:** ![skylinegtr20](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@skylinegtr20](https://forums.speedlife.net/u/skylinegtr20)\ **Post date:** [August 26, 2007, 12:54pm UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709/3 "2007-08-26T12:54:49Z")
haha nope not me, I always wanted a AE86 but never got around to it. Can i see the picture? I wanta see how close it is :lol: EDIT: Throw me a offer someone. I need it gone this week, Parts and a Car to Purchase ---
**Author:** ![gregrego](https://avatars.discourse-cdn.com/v4/letter/g/e274bd/32.png) [@gregrego](https://forums.speedlife.net/u/gregrego)\ **Post date:** [August 26, 2007, 5:03pm UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709/4 "2007-08-26T17:03:03Z")
I’ve done this same repair, cut and rewelded a clip, very easy job! my skyline has been running for almost 2 years since i did it without incident. If you can use a MIG/TIG this will be a gravy job for you. How’s the water pump?? in my accident the housing had a hairline crack in it and it blew the first time i hit 5k rpm ---
**Author:** ![skylinegtr20](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@skylinegtr20](https://forums.speedlife.net/u/skylinegtr20)\ **Post date:** [August 26, 2007, 7:48pm UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709/5 "2007-08-26T19:48:41Z")
yep not a hard repair at all. I personally just dont have the time for it. I have a Skyline build right now and i dont need two 😃 RB25 NEO this winter 😛 ---
**Author:** ![skylinegtr20](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@skylinegtr20](https://forums.speedlife.net/u/skylinegtr20)\ **Post date:** [August 29, 2007, 2:13pm UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709/6 "2007-08-29T14:13:08Z")
bump, new price $4300 w.o parts ---
**Author:** ![skylinegtr20](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@skylinegtr20](https://forums.speedlife.net/u/skylinegtr20)\ **Post date:** [September 1, 2007, 5:38pm UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709/7 "2007-09-01T17:38:28Z")
bump ---
**Author:** ![skylinegtr20](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@skylinegtr20](https://forums.speedlife.net/u/skylinegtr20)\ **Post date:** [September 4, 2007, 9:46pm UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709/8 "2007-09-04T21:46:59Z")
bump ---
**Author:** ![JDMCURT](https://avatars.discourse-cdn.com/v4/letter/j/bcef8e/32.png) [@JDMCURT](https://forums.speedlife.net/u/JDMCURT)\ **Post date:** [September 5, 2007, 4:41pm UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709/9 "2007-09-05T16:41:45Z")
Part it out! 😛 … I see many parts I want 😉 ---
**Author:** ![skylinegtr20](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@skylinegtr20](https://forums.speedlife.net/u/skylinegtr20)\ **Post date:** [September 6, 2007, 8:57am UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709/10 "2007-09-06T08:57:41Z")
what are you intrested in… I might even have them sitting around my place, i have a garage full of parts. If not if it comes to where there is snow on the ground… I will part it out. I will have more time around mid October and on. thanks. ---
**Author:** ![JDMCURT](https://avatars.discourse-cdn.com/v4/letter/j/bcef8e/32.png) [@JDMCURT](https://forums.speedlife.net/u/JDMCURT)\ **Post date:** [September 6, 2007, 11:34am UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709/11 "2007-09-06T11:34:33Z")
I see a 2way diff and a downpipe to start. Also Hicas lockout bar? ill trade you my parts plus cash for them so the car can still run. Let me know! ---
**Author:** ![skylinegtr20](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@skylinegtr20](https://forums.speedlife.net/u/skylinegtr20)\ **Post date:** [September 6, 2007, 10:22pm UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709/12 "2007-09-06T22:22:05Z")
yep the car can run… PM with a offer. 😃 ---
**Author:** ![skylinegtr20](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@skylinegtr20](https://forums.speedlife.net/u/skylinegtr20)\ **Post date:** [September 8, 2007, 11:49pm UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709/13 "2007-09-08T23:49:20Z")
car is sold to my friend, JDMCURT you have a PM ---
**Author:** ![Garret\_Volden](https://avatars.discourse-cdn.com/v4/letter/g/f475e1/32.png) [@Garret\_Volden](https://forums.speedlife.net/u/Garret_Volden)\ **Post date:** [September 9, 2007, 12:20pm UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709/14 "2007-09-09T12:20:33Z")
congratz ---
**Author:** ![skylinegtr20](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@skylinegtr20](https://forums.speedlife.net/u/skylinegtr20)\ **Post date:** [September 9, 2007, 1:02pm UTC](https://forums.speedlife.net/t/fs-1991-crashed-skyline-all-parts-to-fix-drift-build/147709/15 "2007-09-09T13:02:12Z")
Sadly Im still helping put the car together… so im going to have no time what so ever :?