# FS 2 WORK VS 18 x 10.5 -7offset 4 & 5 lug 114.3 **URL:** https://forums.speedlife.net/t/fs-2-work-vs-18-x-10-5-7offset-4-5-lug-114-3/146034 **Category:** Classifieds **Created:** [March 3, 2007, 11:36am UTC](https://forums.speedlife.net/t/fs-2-work-vs-18-x-10-5-7offset-4-5-lug-114-3/146034 "2007-03-03T11:36:44Z") **Posts on this page:** 13 **Page:** 1
### Author: ![sil\_eightyRPS13](https://avatars.discourse-cdn.com/v4/letter/s/2bfe46/32.png) [@sil\_eightyRPS13](https://forums.speedlife.net/u/sil_eightyRPS13) #### Post date: [March 3, 2007, 11:36am UTC](https://forums.speedlife.net/t/fs-2-work-vs-18-x-10-5-7offset-4-5-lug-114-3/146034/1 "2007-03-03T11:36:44Z")
FS 2 WORK VS 18 x 10.5 -7offset… 4 & 5 lug 114.3 very sexy rims…came with 235/40/R18 rubber from Japan…not awhole lot left on them but at least 30-40% asking $550 firm PM if intrested ![http://members.shaw.ca/sil_eighty/work.jpg](http://members.shaw.ca/sil_eighty/work.jpg) ![http://members.shaw.ca/sil_eighty/work2.jpg](http://members.shaw.ca/sil_eighty/work2.jpg) ![http://members.shaw.ca/sil_eighty/work4.jpg](http://members.shaw.ca/sil_eighty/work4.jpg) ![http://members.shaw.ca/sil_eighty/work5.jpg](http://members.shaw.ca/sil_eighty/work5.jpg) ![http://members.shaw.ca/sil_eighty/work7.jpg](http://members.shaw.ca/sil_eighty/work7.jpg) ![http://members.shaw.ca/sil_eighty/work6.jpg](http://members.shaw.ca/sil_eighty/work6.jpg) ---
### Author: ![skylinegtr20](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@skylinegtr20](https://forums.speedlife.net/u/skylinegtr20) #### Post date: [March 3, 2007, 1:48pm UTC](https://forums.speedlife.net/t/fs-2-work-vs-18-x-10-5-7offset-4-5-lug-114-3/146034/2 "2007-03-03T13:48:57Z")
how hard would it be to source out the front rims of the same model? ---
### Author: ![sil\_eightyRPS13](https://avatars.discourse-cdn.com/v4/letter/s/2bfe46/32.png) [@sil\_eightyRPS13](https://forums.speedlife.net/u/sil_eightyRPS13) #### Post date: [March 3, 2007, 2:32pm UTC](https://forums.speedlife.net/t/fs-2-work-vs-18-x-10-5-7offset-4-5-lug-114-3/146034/3 "2007-03-03T14:32:58Z")
> [@skylinegtr20](#): > > how hard would it be to source out the front rims of the same model? not very the VS is a common line…there is many different VS styles check yahoo auctions under this link [http://search1.auctions.yahoo.co.jp/jp/search/auc?p=&auccat=2084005140&alocale=0jp&acc=jp](http://search1.auctions.yahoo.co.jp/jp/search/auc?p=&auccat=2084005140&alocale=0jp&acc=jp) then type in VS in the far left bar ---
### Author: ![AdamP](https://avatars.discourse-cdn.com/v4/letter/a/b19c9b/32.png) [@AdamP](https://forums.speedlife.net/u/AdamP) #### Post date: [March 3, 2007, 4:27pm UTC](https://forums.speedlife.net/t/fs-2-work-vs-18-x-10-5-7offset-4-5-lug-114-3/146034/4 "2007-03-03T16:27:01Z")
How would these fit on the back of an 180sx? Rolling the fender necessary? ---
### Author: ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13) #### Post date: [March 3, 2007, 5:02pm UTC](https://forums.speedlife.net/t/fs-2-work-vs-18-x-10-5-7offset-4-5-lug-114-3/146034/5 "2007-03-03T17:02:56Z")
^^^^ Ummm over fenders are nesecary Rolling and pulling will not work ---
### Author: ![skylinegtr20](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@skylinegtr20](https://forums.speedlife.net/u/skylinegtr20) #### Post date: [March 3, 2007, 7:20pm UTC](https://forums.speedlife.net/t/fs-2-work-vs-18-x-10-5-7offset-4-5-lug-114-3/146034/6 "2007-03-03T19:20:16Z")
yep need over fenders, no chance just rolling, the link just showed up in that japanese squares and triangles ---
### Author: ![Hustler\_M](https://avatars.discourse-cdn.com/v4/letter/h/91b2a8/32.png) [@Hustler\_M](https://forums.speedlife.net/u/Hustler_M) #### Post date: [March 5, 2007, 8:53pm UTC](https://forums.speedlife.net/t/fs-2-work-vs-18-x-10-5-7offset-4-5-lug-114-3/146034/7 "2007-03-05T20:53:49Z")
nice wheels, if you had 4 I would consider buying them ---
### Author: ![Ingredients-240](https://avatars.discourse-cdn.com/v4/letter/i/59ef9b/32.png) [@Ingredients-240](https://forums.speedlife.net/u/Ingredients-240) #### Post date: [March 6, 2007, 5:57pm UTC](https://forums.speedlife.net/t/fs-2-work-vs-18-x-10-5-7offset-4-5-lug-114-3/146034/8 "2007-03-06T17:57:51Z")
Would they fit a S14 with a good roll done? and just to clairify they’ll fit both 4 and 5 lug 240’s? ---
### Author: ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13) #### Post date: [March 6, 2007, 6:52pm UTC](https://forums.speedlife.net/t/fs-2-work-vs-18-x-10-5-7offset-4-5-lug-114-3/146034/9 "2007-03-06T18:52:46Z")
> [@RS13](#): > > ^^^^ > > Ummm over fenders are nesecary > > Rolling and pulling will not work The could fit on an S14 but with something like a 215 and 4 degree’s of camber and a decent pull ---
### Author: ![apex\_drifter](https://avatars.discourse-cdn.com/v4/letter/a/ac8455/32.png) [@apex\_drifter](https://forums.speedlife.net/u/apex_drifter) #### Post date: [March 6, 2007, 8:08pm UTC](https://forums.speedlife.net/t/fs-2-work-vs-18-x-10-5-7offset-4-5-lug-114-3/146034/10 "2007-03-06T20:08:16Z")
do you think i could do a test fit on my s14 with these? I’ll be needing a different sized rim for the rears soon. . . ---
### Author: ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240) #### Post date: [March 6, 2007, 8:49pm UTC](https://forums.speedlife.net/t/fs-2-work-vs-18-x-10-5-7offset-4-5-lug-114-3/146034/11 "2007-03-06T20:49:08Z")
> [@nismo240r](#): > > do you think i could do a test fit on my s14 with these? I’ll be needing a different sized rim for the rears soon. . . These would work good on your car. ---
### Author: ![Ingredients-240](https://avatars.discourse-cdn.com/v4/letter/i/59ef9b/32.png) [@Ingredients-240](https://forums.speedlife.net/u/Ingredients-240) #### Post date: [March 7, 2007, 8:24am UTC](https://forums.speedlife.net/t/fs-2-work-vs-18-x-10-5-7offset-4-5-lug-114-3/146034/12 "2007-03-07T08:24:54Z")
Wow, 215’s and 4 degrees…lol…so with some wide fenders like lee has or chargespeed would you be able to run 275’s or at least something not so stretched with like 2 degrees…i ask because i do plan on it in the next year and don’t mind sitting on them… ---
### Author: ![sil\_eightyRPS13](https://avatars.discourse-cdn.com/v4/letter/s/2bfe46/32.png) [@sil\_eightyRPS13](https://forums.speedlife.net/u/sil_eightyRPS13) #### Post date: [March 7, 2007, 4:04pm UTC](https://forums.speedlife.net/t/fs-2-work-vs-18-x-10-5-7offset-4-5-lug-114-3/146034/13 "2007-03-07T16:04:39Z")
SOLD!!!..to my lil bro and his fc3s S5…no posers thank u