# FS: 2000 Ford Crown vic Police car **URL:** \ **Category:** Classifieds\ **Created:** [December 4, 2007, 12:43pm UTC](https://forums.speedlife.net/t/fs-2000-ford-crown-vic-police-car/194023 "2007-12-04T12:43:05Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![trigun7469](https://avatars.discourse-cdn.com/v4/letter/t/9fc348/32.png) [@trigun7469](https://forums.speedlife.net/u/trigun7469)\ **Post date:** [December 4, 2007, 12:43pm UTC](https://forums.speedlife.net/t/fs-2000-ford-crown-vic-police-car/194023/1 "2007-12-04T12:43:05Z")
[Ebay Link](http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MESEX:IT&item=330194827948&_trksid=p3984.cSELL.m315.lVI) 2000 Crown Victoria Police Interceptor 135,xxx miles 42,xxx On brand new crate motor Recently Replaced Parts: Belts replaced All fluids replaced using a coolant exchange machine Tranny filter Gas shocks 2500 miles ago Platinum plug wires Coil packs New air filter PCV valve Recent top end engine clean Replaced a tire which comes with warranty and road hazard warranty Comes with the following parts: outer tie rod ends and the tie rod sleeves for both sides. I also got the upper and lower ball joints and control arm bushings for both sides and finally a spotlight. Needs: An alignment In the near future I would replace the front brakes and use the parts that the car comes with. The car has a few imperfections on the outside as well as some rust. The interior is clean with a small rip in the seat cover on the head rest. The car is reliable and is fun to drive. ---
**Author:** ![trigun7469](https://avatars.discourse-cdn.com/v4/letter/t/9fc348/32.png) [@trigun7469](https://forums.speedlife.net/u/trigun7469)\ **Post date:** [December 6, 2007, 8:56am UTC](https://forums.speedlife.net/t/fs-2000-ford-crown-vic-police-car/194023/2 "2007-12-06T08:56:24Z")
bump it up