# FS: 240sx stuff - VLSD - manual seatbelt conversion etc. **URL:** \ **Category:** Classifieds\ **Created:** [November 9, 2005, 4:59pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376 "2005-11-09T16:59:19Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [November 9, 2005, 4:59pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/1 "2005-11-09T16:59:19Z")
i have a R200 VLSD out of a 1991 coupe, it has more than 125 miles, (200,000) but exact mielage is unknown. $130 usd * * * manual seatbelt conversions full conversion with all interior panels from a tan coupe harness belts and a-pillars from a grey / black interior coupe / hatch * * * tons of other parts off a 1993 coupe that i smashed. just ask * * * 300zx x-drilled rotors front and rear, brand new in box $90 per set (no name brand) * * * full S14 suspension with red lowering springs (unknown brand) the struts are all blown. comes with strut mount bearings too $80 * * * also… if any of you 240sx guys are looking for work to be done on your cars my buddies and i just got some shop space and would love to do some jobs to put towards the rent and general party expenses… my buddy chris is the best 240sx mechanic for hours in any direction. he can do an SR / CA swap in a weekend with FMIC and piping KA to KA in a day and a half auto to manual in a single evening most of the parts we can source for you if you need major junk done. ---
**Author:** ![HotRodKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hotrodkid/32/7609_2.png) [@HotRodKid](https://forums.speedlife.net/u/HotRodKid)\ **Post date:** [November 9, 2005, 5:05pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/2 "2005-11-09T17:05:28Z")
bing is fuckin man for 240 stuffs … boosted3g and i loaded the eclipse truck FULL of shiz the one day …then i almost got busted for not declaring $150 worth of car parts at the border :lol: :tup: for a good seller ---
**Author:** ![Adictd2b00st](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/adictd2b00st/32/7625_2.png) [@Adictd2b00st](https://forums.speedlife.net/u/Adictd2b00st)\ **Post date:** [November 9, 2005, 7:28pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/3 "2005-11-09T19:28:57Z")
ugh, why couldn’t u have that vlsd BEFORE winter came ☹ ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [November 9, 2005, 9:17pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/4 "2005-11-09T21:17:59Z")
why? chris will put it in for you man, like $75 frig, you can have the VLSD for free, just take it off my tab for the alarm. ---
**Author:** ![Adictd2b00st](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/adictd2b00st/32/7625_2.png) [@Adictd2b00st](https://forums.speedlife.net/u/Adictd2b00st)\ **Post date:** [November 9, 2005, 9:57pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/5 "2005-11-09T21:57:07Z")
its tempting…but i might be selling the 240 i duno… ---
**Author:** ![woz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/woz/32/7605_2.png) [@woz](https://forums.speedlife.net/u/woz)\ **Post date:** [November 9, 2005, 10:24pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/6 "2005-11-09T22:24:38Z")
> [@Adictd2b00st](#): > > its tempting…but i might be selling the 240 i duno… yea, were trading chassis, right jay but bing, i need a driver side hub/knuckle assembly non abs off that coupe, how much ---
**Author:** ![Adictd2b00st](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/adictd2b00st/32/7625_2.png) [@Adictd2b00st](https://forums.speedlife.net/u/Adictd2b00st)\ **Post date:** [November 9, 2005, 10:27pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/7 "2005-11-09T22:27:31Z")
nah, no trading haha unless i get that motor too 😛 ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [November 10, 2005, 6:56am UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/8 "2005-11-10T06:56:55Z")
> [@originalsin](#): > > yea, were trading chassis, right jay > > but bing, i need a driver side hub/knuckle assembly non abs off that coupe, how much the car had ABS unfortunately, i have extra hubs though. i am using non-ABS hubs on my ABS car now, i just had to tear out some other junk. if u dont want the hubs i have, ABS, i’ll see if we have some non-abs ones. RX-7’s are slow especially when they’re a state away ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [November 14, 2005, 12:45pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/9 "2005-11-14T12:45:14Z")
VLSD is sold ---
**Author:** ![woz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/woz/32/7605_2.png) [@woz](https://forums.speedlife.net/u/woz)\ **Post date:** [November 14, 2005, 12:58pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/10 "2005-11-14T12:58:47Z")
yea see if u have any non abs ones, what happened was the caliper bracket bolt boke and was rusted onto the spindle, so i had to cut it off, in doing so i took a little of the actual bracket off. i dident think this would cause any problems, but im getting a weird clunking noise when braking and iv tryed everything, all new brakes, the disc quite gel, shims, nothing seems to work so im thinking its gotta be that do u have all the stuff for a front brake conversion? minus the lines and like pads n shit? ---
**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\ **Post date:** [November 14, 2005, 1:11pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/11 "2005-11-14T13:11:29Z")
ill trade you something for the seatbelt conversions… ---
**Author:** ![woz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/woz/32/7605_2.png) [@woz](https://forums.speedlife.net/u/woz)\ **Post date:** [November 14, 2005, 3:01pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/12 "2005-11-14T15:01:29Z")
dont trade him a maf, i got dibs on one of those!! ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [November 14, 2005, 6:37pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/13 "2005-11-14T18:37:14Z")
what kinda mafs you need? i have a sohc one if you need one for an SR. newman, whatdya got to trades? ---
**Author:** ![woz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/woz/32/7605_2.png) [@woz](https://forums.speedlife.net/u/woz)\ **Post date:** [November 14, 2005, 8:13pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/14 "2005-11-14T20:13:43Z")
naw i want z32, i got like 3 er 4 sohc lol, wat about those spindles tho? ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [November 18, 2005, 7:03pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/15 "2005-11-18T19:03:28Z")
front 4 bolt? i may be going 5 bolt thiw winter, if that goes down you can have my 89 JDM silvia front hubs, non-abs, with ARP studs pressed in. ---
**Author:** ![woz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/woz/32/7605_2.png) [@woz](https://forums.speedlife.net/u/woz)\ **Post date:** [November 18, 2005, 7:11pm UTC](https://forums.speedlife.net/t/fs-240sx-stuff-vlsd-manual-seatbelt-conversion-etc/4376/16 "2005-11-18T19:11:54Z")
awesome, i got time so lemme know