# FS: 2G DSM Greddy 24R FMIC

**URL:** <https://forums.speedlife.net/t/fs-2g-dsm-greddy-24r-fmic/37873>\
**Category:** Classifieds\
**Created:** [October 30, 2007, 7:58am UTC](https://forums.speedlife.net/t/fs-2g-dsm-greddy-24r-fmic/37873 "2007-10-30T07:58:42Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![tonymitss5](https://avatars.discourse-cdn.com/v4/letter/t/b77776/32.png) [@tonymitss5](https://forums.speedlife.net/u/tonymitss5)\
**Post date:** [October 30, 2007, 7:58am UTC](https://forums.speedlife.net/t/fs-2g-dsm-greddy-24r-fmic/37873/1 "2007-10-30T07:58:42Z")

</div>

I was going to use this on my next project, but have decided to go with a different FMIC. It is in decent shape, it has some bent fins, I pressure tested the core to 30psi and it held fine. Comes with 2 of the original pipes and two custom pipes to bolt right up to the stock turbo location. The other pipes bolt directly to the upper IC pipe, this is all bolt on, replacing your SMIC. If you had any intentions of getting a FMIC and painting it flat black this is the one for you 😃  
My camera is broken so I can’t take actual pictures, but here is a picture off eBay of a new one.  
 ![http://i18.ebayimg.com/03/i/01/7d/75/3c_1_b.JPG](http://i18.ebayimg.com/03/i/01/7d/75/3c_1_b.JPG)  
$300

---

<div class="post-metadata">

**Author:** ![tonymitss5](https://avatars.discourse-cdn.com/v4/letter/t/b77776/32.png) [@tonymitss5](https://forums.speedlife.net/u/tonymitss5)\
**Post date:** [November 11, 2007, 6:14pm UTC](https://forums.speedlife.net/t/fs-2g-dsm-greddy-24r-fmic/37873/2 "2007-11-11T18:14:20Z")

</div>

Bump