# FS: 300zx Rear brakes

**URL:** <https://forums.speedlife.net/t/fs-300zx-rear-brakes/138482>\
**Category:** Classifieds\
**Created:** [March 3, 2005, 7:43pm UTC](https://forums.speedlife.net/t/fs-300zx-rear-brakes/138482 "2005-03-03T19:43:17Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\
**Post date:** [March 3, 2005, 7:43pm UTC](https://forums.speedlife.net/t/fs-300zx-rear-brakes/138482/1 "2005-03-03T19:43:17Z")

</div>

Hey,

I have a set of 300zx rear brake calipers and rotors.

The calipers look to be in good condition. The rotors are rusty due to sitting in the garage for a couple years. I was just too lazy to install the rears. All you would need to do is machine them.

Make me an offer. I’m thinking around the $300 mark???

![http://www.n-e-c-c.com/aaron/Z32rear1.jpg](http://www.n-e-c-c.com/aaron/Z32rear1.jpg)  
 ![http://www.n-e-c-c.com/aaron/Z32rear2.jpg](http://www.n-e-c-c.com/aaron/Z32rear2.jpg)  
 ![http://www.n-e-c-c.com/aaron/Z32rear3.jpg](http://www.n-e-c-c.com/aaron/Z32rear3.jpg)  
 ![http://www.n-e-c-c.com/aaron/Z32rear4.jpg](http://www.n-e-c-c.com/aaron/Z32rear4.jpg)

This is a little bit of a project for the S13. Here is a write-up on how to install them: [http://importnut.net/300zxbrakeswap.htm](http://importnut.net/300zxbrakeswap.htm)

Enjoy!

---

<div class="post-metadata">

**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\
**Post date:** [March 11, 2005, 8:13am UTC](https://forums.speedlife.net/t/fs-300zx-rear-brakes/138482/2 "2005-03-11T08:13:36Z")

</div>

What? No one wants to be a pimp. Seriously, just make me an offer.

---

<div class="post-metadata">

**Author:** ![Nis240](https://avatars.discourse-cdn.com/v4/letter/n/a9a28c/32.png) [@Nis240](https://forums.speedlife.net/u/Nis240)\
**Post date:** [March 11, 2005, 8:17am UTC](https://forums.speedlife.net/t/fs-300zx-rear-brakes/138482/3 "2005-03-11T08:17:57Z")

</div>

If you dont have the Z32 uprights than its kinda hard to swap those brakes. You could swap them but you wouldnt have an EBrake.

---

<div class="post-metadata">

**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\
**Post date:** [March 11, 2005, 8:58am UTC](https://forums.speedlife.net/t/fs-300zx-rear-brakes/138482/4 "2005-03-11T08:58:44Z")

</div>

You dont’ need the uprights. And the ebrake can be modified. Its been done time and time again. Just takes a lil’ time.

You need the 300zx ebrake cables, and the 300zx splash sheild setup.

---

<div class="post-metadata">

**Author:** ![Inzane](https://avatars.discourse-cdn.com/v4/letter/i/b38774/32.png) [@Inzane](https://forums.speedlife.net/u/Inzane)\
**Post date:** [March 11, 2005, 9:45am UTC](https://forums.speedlife.net/t/fs-300zx-rear-brakes/138482/5 "2005-03-11T09:45:46Z")

</div>

Hmm… I might be tempted to buy just the calipers from you, to use as cores for getting them powdercoated.

Hmm…

---

<div class="post-metadata">

**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\
**Post date:** [October 25, 2006, 9:13am UTC](https://forums.speedlife.net/t/fs-300zx-rear-brakes/138482/6 "2006-10-25T09:13:54Z")

</div>

So, since the car is up for sale, its time to get rid of the brakes too.

$200