# FS: 60# Mototron Injectors

**URL:** <https://forums.speedlife.net/t/fs-60-mototron-injectors/66423>\
**Category:** Classifieds\
**Created:** [April 19, 2009, 11:10am UTC](https://forums.speedlife.net/t/fs-60-mototron-injectors/66423 "2009-04-19T11:10:38Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\
**Post date:** [April 19, 2009, 11:10am UTC](https://forums.speedlife.net/t/fs-60-mototron-injectors/66423/1 "2009-04-19T11:10:38Z")

</div>

I’ve used these for the last couple years. Still work perfectly.

**Racetronix Part # L107FM Part # 107961** (Siemens FI114961 - Mototron INJ-GAS-006 - Accel 74620L - MSD/Edge 2030)  
_All tests run with n-Heptane (0.6855g/mL) @ 20oC (+/-1oC), 3.0 Bar (+/-0.01 Bar) (43.5PSI) , 14VDC (+/-0.05VDC), saturated driver. Engineering data specifies a flow ratio of apx. 1.035:1 when converting to gas._ Static Flow Rate: 60.56 lb/hr = 668 cc/min = 458 g/min (+/-6%)  
Dynamic Flow Rate 2.5ms PW @ 100Hz @ **600KPa** : 19.5 mg/pulse (+/-6%)  
Coil Resistance: 12 Ohms _(This high-impedance injector will work with all factory ECM/PCM injector drivers)_  
Gain: 0.11ms/mg  
Offset: 0.055ms  
Turn on time @ 14VDC: 1.14ms  
Turn off time: 0.85ms @ 600KPa  
Spray Pattern: Cone (4-Hole)  
Connector: Minitimer (Bosch EV1)  
**[\> Click here for dimensions \<](http://www.racetronix.com/images/injectors/L107.pdf)**  
Factory fitted with Viton upper and lower o-rings.  
Grease supplied to lubricate o-rings prior to installation.  
**Dynamically** flowed and grouped to **within 1%** tolerance using Racetronix custom injector flow bench

 ![http://www.racetronix.com/product/Injectors/L107-1.jpg](http://www.racetronix.com/product/Injectors/L107-1.jpg)

**$250**

---

<div class="post-metadata">

**Author:** ![racer16](https://avatars.discourse-cdn.com/v4/letter/r/bc79bd/32.png) [@racer16](https://forums.speedlife.net/u/racer16)\
**Post date:** [April 19, 2009, 12:18pm UTC](https://forums.speedlife.net/t/fs-60-mototron-injectors/66423/2 "2009-04-19T12:18:32Z")

</div>

what do these fit

---

<div class="post-metadata">

**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\
**Post date:** [April 19, 2009, 12:21pm UTC](https://forums.speedlife.net/t/fs-60-mototron-injectors/66423/3 "2009-04-19T12:21:13Z")

</div>

i know they fit all LS1 cars and trucks, i believe late model fords, including fox style mustangs, but beyond that, i really dont know.

They have an **Bosch EV1** aka Minitimer connector

if they are the proper size, but not the proper connector, you can buy adapters or new plugs

---

<div class="post-metadata">

**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\
**Post date:** [April 20, 2009, 11:28am UTC](https://forums.speedlife.net/t/fs-60-mototron-injectors/66423/4 "2009-04-20T11:28:45Z")

</div>

comon, somebody wants to go fast, i know it!

---

<div class="post-metadata">

**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\
**Post date:** [April 22, 2009, 7:46pm UTC](https://forums.speedlife.net/t/fs-60-mototron-injectors/66423/5 "2009-04-22T19:46:00Z")

</div>

last bump before they go on ls1tech