# FS: 89 Mustang Notch Roller - $500 **URL:** \ **Category:** Classifieds\ **Created:** [May 13, 2008, 6:30pm UTC](https://forums.speedlife.net/t/fs-89-mustang-notch-roller-500/48393 "2008-05-13T18:30:30Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\ **Post date:** [May 13, 2008, 6:30pm UTC](https://forums.speedlife.net/t/fs-89-mustang-notch-roller-500/48393/1 "2008-05-13T18:30:30Z")
[NOT MINE] Pretty good deal for anyone looking for a Fox to throw together. Clean roller with slicks, and a few lil extras. [http://www.turboford.net/ubb/ultimatebb.php?ubb=get\_topic;f=6;t=012360](http://www.turboford.net/ubb/ultimatebb.php?ubb=get_topic;f=6;t=012360) > **[Photo Storage](https://s278.photobucket.com/albums/kk109/turbolx23/)** > > Store your photos and videos online with secure storage from Photobucket. Available on iOS, Android and desktop. Securely backup your memories and sign up today! > I have a 1989 Ford Mustang Notchback that was a project car of mine but I am moving and cannot take it with me. It was a running 2.3L turbo car with a 5 speed trans and I intended to replace it with the same engine so all the original wiring for a 4cyl is there. It is currently pulled apart as I started priming the engine bay but must part with it. > The interior is stripped with the intention of having an S&W roll cage welded in. The dash is still installed, door panels are also still on. I should have most of the interior which I can include aside from the carpet which was in bad shape. The headliner is in but has some rips in it. I will include the S&W roll cage with the purchase, it is brand new never installed. The floor pans are in good shape, some surface rust no rot or anything. > The body is in decent condition. The right side rear quarter panel has some bondo or something on it, doesnt look too bad but will need to be dealt with. I dont know what extent the damage was as it was like that when i purchased the car. > The car also has a brand new Walbro 255 fuel pump installed in the tank and a brand new Taylor battery trunk mount kit in the trunk. The box is installed but I did not run the wires. There is also a Moroso cutoff switch installed. I will also include the ten holes with slicks mounted on them, i got them used and used them a few passes myself so I dont know how much life is left. Also installed is a 160mph Ford motorsport speedo. > The K-Member was removed and sold with the intention of putting a tubular k member in so it will be a challenge to move the car but I will assist anyway I can. Its in a position in the garage where maybe a small tow truck could grab it or a trailer. > For an extra $150 I will include a set of lightweight racing seats but they do not have tracks, I adapted the stock tracks to work with them. > Here is a link to the pics: [Photo Storage](http://s278.photobucket.com/albums/kk109/turbolx23/) > I am asking $500. > Car is located in Ridley township Pennsylvania, about 15 minutes from the Philly airport. The car is what it is, if it doesnt sell I will scrap it so serious inquiries only please. > My email is [boosted4d@yahoo.com](mailto:boosted4d@yahoo.com) ---
**Author:** ![AShort](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ashort/32/4947_2.png) [@AShort](https://forums.speedlife.net/u/AShort)\ **Post date:** [May 13, 2008, 6:32pm UTC](https://forums.speedlife.net/t/fs-89-mustang-notch-roller-500/48393/2 "2008-05-13T18:32:04Z")
nice stang dude…GLWS 😉 i keed i keed ---
**Author:** ![Nikuk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nikuk/32/7254_2.png) [@Nikuk](https://forums.speedlife.net/u/Nikuk)\ **Post date:** [May 13, 2008, 6:35pm UTC](https://forums.speedlife.net/t/fs-89-mustang-notch-roller-500/48393/3 "2008-05-13T18:35:47Z")
shit, mine maybe FS soon too ---
**Author:** ![AShort](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ashort/32/4947_2.png) [@AShort](https://forums.speedlife.net/u/AShort)\ **Post date:** [May 13, 2008, 6:54pm UTC](https://forums.speedlife.net/t/fs-89-mustang-notch-roller-500/48393/4 "2008-05-13T18:54:31Z")
> [@Nikuk](#): > > shit, mine maybe FS soon too you have a stang? 5.0 or SVO? ---
**Author:** ![Karter](https://avatars.discourse-cdn.com/v4/letter/k/e480ec/32.png) [@Karter](https://forums.speedlife.net/u/Karter)\ **Post date:** [May 13, 2008, 9:24pm UTC](https://forums.speedlife.net/t/fs-89-mustang-notch-roller-500/48393/5 "2008-05-13T21:24:21Z")
Id buy it and put a Small block chevy in it, for the obvious reasons. ---
**Author:** ![Zer0DazE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/zer0daze/32/7624_2.png) [@Zer0DazE](https://forums.speedlife.net/u/Zer0DazE)\ **Post date:** [May 14, 2008, 5:31am UTC](https://forums.speedlife.net/t/fs-89-mustang-notch-roller-500/48393/6 "2008-05-14T05:31:53Z")
> [@Nikuk](#): > > shit, mine maybe FS soon too bull shit you love it as much as you hate it