# FS: 90' 240 Fastback.. **URL:** \ **Category:** Classifieds\ **Created:** [December 1, 2005, 8:10pm UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834 "2005-12-01T20:10:13Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [December 1, 2005, 8:10pm UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/1 "2005-12-01T20:10:13Z")
Details on the car… 1990 240sx hatchback 213k purchased in april 03. 250k now **Suspension/Chassis:** -LSD -Rear Strut bar -AGX shocks, Tein S-Tech springs -Frame rails boxed in with 1/8" Steel. -Subframe re-inforced with 1/8" pressed steel **Drivetrain:** -KA24E 62xxxx KM -ACT HDSS Clutch (333 ft/lb) Street Performance Clutch Throw out bearing/Pilot bearing -Custom made 3" intake… -2.5" Custom catback -Walbro Fuel Pump -Reman’d PS Rack, rods, bushings, boots etc. steering ratio was shortened 1/2 rotation on wheel. and its semi-stiffer than stock. **Exterior** -OEM Sideskirts -New bumper, fenders, hood, doors. hatch is bubbling. Extra goodies i have to add on. -KA24E Ported head, shaved valve cover in STi Blue -370cc CA18DET injectors -Megan Racing B.O.V Problems with the car. None, clean underneath, struts towers are good, 400 city km a tank Needs a driver’s side quarter panel. It was the last thing i was going to fix as i bought the car with the damage. and outer pass tie rod. ball joints just done. Pics (without wheels/tires or sideskirts): First day i bought the car: ![http://img.photobucket.com/albums/v129/hatchsi/Bran240_001.jpg](http://img.photobucket.com/albums/v129/hatchsi/Bran240_001.jpg) Some point this summer: ![http://img.photobucket.com/albums/v719/brandons13/newpaint3plated.jpg](http://img.photobucket.com/albums/v719/brandons13/newpaint3plated.jpg) ![http://img.photobucket.com/albums/v719/brandons13/newpaint5plated.jpg](http://img.photobucket.com/albums/v719/brandons13/newpaint5plated.jpg) ![http://img.photobucket.com/albums/v719/brandons13/newpaint4.jpg](http://img.photobucket.com/albums/v719/brandons13/newpaint4.jpg) ![http://img.photobucket.com/albums/v719/brandons13/newpaint2.jpg](http://img.photobucket.com/albums/v719/brandons13/newpaint2.jpg) ![http://img.photobucket.com/albums/v719/brandons13/newpaint.jpg](http://img.photobucket.com/albums/v719/brandons13/newpaint.jpg) New KA, on its 3rd oil change since i put it in… had 49xxx on it. ![http://img.photobucket.com/albums/v129/hatchsi/DSCF0059.jpg](http://img.photobucket.com/albums/v129/hatchsi/DSCF0059.jpg)[/img] $2400 AS IS with etest, $2750 certed. ---
**Author:** ![prodigy](https://avatars.discourse-cdn.com/v4/letter/p/8491ac/32.png) [@prodigy](https://forums.speedlife.net/u/prodigy)\ **Post date:** [December 1, 2005, 8:39pm UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/2 "2005-12-01T20:39:21Z")
Pics of driver side quarter? ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [December 1, 2005, 8:48pm UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/3 "2005-12-01T20:48:13Z")
Yah, this was when i bought the car as well… Since, Ive painted it myself at the rent-a-booth in niagara. Ill admit i rushed it, as i didnt have enough time to work on the 1/4 more. I did take all the FG / bondo off when i repainted it to actually see the damage… It looks a fair bit better than it does in this pic… I had a shop quote me 550 to weld a new one in. including the new 1/4 window. Best to see it in person. ![http://img.photobucket.com/albums/v129/hatchsi/240panel.jpg](http://img.photobucket.com/albums/v129/hatchsi/240panel.jpg) ---
**Author:** ![DC5R](https://avatars.discourse-cdn.com/v4/letter/d/a3d4f5/32.png) [@DC5R](https://forums.speedlife.net/u/DC5R)\ **Post date:** [December 1, 2005, 10:29pm UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/4 "2005-12-01T22:29:47Z")
I cant really see from pics. So the driver’s side quater fender got damaged? Is it a big dent like you hit something? I just dont get what you mean weld it ? ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [December 2, 2005, 6:20am UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/5 "2005-12-02T06:20:40Z")
Bah, just come see it in person then. I dont see whats so complicated… Blast panel, drill out spot welds. put new panel on. weld weld weld. 😉 ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [January 17, 2006, 5:38pm UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/6 "2006-01-17T17:38:54Z")
BUMP! need it gone ASAP. time to move on to a new project just machined my rotors and put on new pads too. will throw in the bucket seat if bought by the end of january. 3000 AS IS. with etest BUY IT NOW! ---
**Author:** ![crsbb](https://avatars.discourse-cdn.com/v4/letter/c/b9bd4f/32.png) [@crsbb](https://forums.speedlife.net/u/crsbb)\ **Post date:** [February 11, 2006, 1:45pm UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/7 "2006-02-11T13:45:43Z")
Is this car still for sale and if so what do you mean by -Frame rails boxed in with 1/8" Steel. -Subframe re-inforced with 1/8" pressed steel you mean the frame was rotted and then welded? Also have you done anything to the rear quarter ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [February 12, 2006, 8:37am UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/8 "2006-02-12T08:37:52Z")
> [@crsbb](#): > > Is this car still for sale and if so what do you mean by > -Frame rails boxed in with 1/8" Steel. > -Subframe re-inforced with 1/8" pressed steel > you mean the frame was rotted and then welded? > Also have you done anything to the rear quarter The rails were a bit rusty and minor holes in the front part of them. I had boxed them in (fishplated). So they’re able to certify. The rear rails have been fishplated, it is no longer a unibody frame, the two rails have been welded together. The subframe id have to take a pic or show in person to see what was done. And i haven’t done anything to the quarter panel since i posted the car for sale. ---
**Author:** ![Alan\_s-240](https://avatars.discourse-cdn.com/v4/letter/a/c67d28/32.png) [@Alan\_s-240](https://forums.speedlife.net/u/Alan_s-240)\ **Post date:** [February 12, 2006, 10:27am UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/9 "2006-02-12T10:27:13Z")
I like the mufflers position, very professional. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [February 22, 2006, 7:06am UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/10 "2006-02-22T07:06:02Z")
SOLD to DriftRPS13. Thanks guys. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [March 14, 2006, 8:52pm UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/11 "2006-03-14T20:52:45Z")
Deal fell through. Need it gone, $2500 AS IS $2750 cert/etest ---
**Author:** ![crsbb](https://avatars.discourse-cdn.com/v4/letter/c/b9bd4f/32.png) [@crsbb](https://forums.speedlife.net/u/crsbb)\ **Post date:** [March 14, 2006, 8:57pm UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/12 "2006-03-14T20:57:13Z")
what?! I just got one… K After the 19th i might be intersted PM with everything that comes with car and post pics of the quarter that is damaged. like a recent picture ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [April 5, 2006, 12:12pm UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/13 "2006-04-05T12:12:46Z")
Latest pic from back in the winter ![http://img.photobucket.com/albums/v719/brandons13/240ness022.jpg](http://img.photobucket.com/albums/v719/brandons13/240ness022.jpg) take it. 2400 as is. with deck, short shifter, suspension and exhauust… ---
**Author:** ![sidewayzmaniac](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sidewayzmaniac/32/5573_2.png) [@sidewayzmaniac](https://forums.speedlife.net/u/sidewayzmaniac)\ **Post date:** [April 6, 2006, 8:49am UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/14 "2006-04-06T08:49:33Z")
Give me a call 905 451 5076 or [nwja@msn.com](mailto:nwja@msn.com) I would like to come and see it I’m in brampton. Thanks, Nick ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [April 6, 2006, 9:50am UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/15 "2006-04-06T09:50:39Z")
Tried calling you nick, no answer. Ill try again later on… ---
**Author:** ![sidewayzmaniac](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sidewayzmaniac/32/5573_2.png) [@sidewayzmaniac](https://forums.speedlife.net/u/sidewayzmaniac)\ **Post date:** [April 6, 2006, 10:18am UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/16 "2006-04-06T10:18:02Z")
Sorry I didn’t mention I was at school in the morning I"m home now Give me a ring ---
**Author:** ![Polkaroo](https://avatars.discourse-cdn.com/v4/letter/p/f19dbf/32.png) [@Polkaroo](https://forums.speedlife.net/u/Polkaroo)\ **Post date:** [April 7, 2006, 6:46pm UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/17 "2006-04-07T18:46:42Z")
Would you consider a trade? 1997 Maxima + cash? PM or email @ [nkbrent\_mccaig@hotmail.com](mailto:nkbrent_mccaig@hotmail.com) Thx, Brent ---
**Author:** ![DarkManX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/darkmanx/32/5569_2.png) [@DarkManX](https://forums.speedlife.net/u/DarkManX)\ **Post date:** [April 12, 2006, 10:43am UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/18 "2006-04-12T10:43:16Z")
I can see this was winter driven? correct or no? ---
**Author:** ![jamievk](https://avatars.discourse-cdn.com/v4/letter/j/e95f7d/32.png) [@jamievk](https://forums.speedlife.net/u/jamievk)\ **Post date:** [April 23, 2006, 8:25pm UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/19 "2006-04-23T20:25:18Z")
Where is sauga are you? When can the car be seen? Whats the best you can do etest and cert? Very interested ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [April 24, 2006, 9:01am UTC](https://forums.speedlife.net/t/fs-90-240-fastback/90834/20 "2006-04-24T09:01:07Z")
Im at winston churchill/dundas PM me for cell number and we can arrange something. [Next page](https://forums.speedlife.net/t/fs-90-240-fastback/90834.md?page=2)