# FS: 95 Civic RHD SirII Shell ++PIX UP++
**URL:** https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394
**Category:** Classifieds
**Created:** [January 21, 2007, 8:23pm UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394 "2007-01-21T20:23:55Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@JamalGQ](https://forums.speedlife.net/u/JamalGQ)
#### Post date: [January 21, 2007, 8:23pm UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/1 "2007-01-21T20:23:55Z")
Im tired of looking at it…So I figure I keep the seats and harnesses and lower the price as well to get rid of it… 3500 and its yours or 5000 with the motor i have listed in the parts section
No time to finish the project and its oh so close. My loss will be someones gain because this IS a sweet ride!! call 3415839
Here goes … its a 95 civic hatch with about 110k on the body. It has had a full front swap to rhd. The engine bay was flat blacked while it was stripped and looks real sharp with almost everything new under the hood. Then the car was primered grey and just needs some fresh paint which is good so you can still pick your own color. it has a full black jdm interior minus the rear plastics. It has black leather seats in the rear and two red sparco buckets and sparco four point harnesses up front. It has a brand new walbro 255 high ouput in it that I’ll leave. It has the jdm power folding mirrors , kyb agx fully adjustable shocks with adjustable coilovers, and a nuespeed sway bar. Rear disc conversion and brand new cross drilled and slotted brembo rotors all way round. This car is going to be sharp as no one around will have one like it. all it needs is a motor and paint. The two things most people wanna do on their own. I want $5000 for it all. pics to come soon…
pics are here !!!
---
### Author:  [@Mr\_T](https://forums.speedlife.net/u/Mr_T)
#### Post date: [January 21, 2007, 8:25pm UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/2 "2007-01-21T20:25:49Z")
hmm price is a little steep for a car with no paint and no motor but then again it is rhd.Any rust or previous body work done to the quarter panels? Get some pics up soon so we can see this and it will sell GLWS!
---
### Author:  [@SilverGT](https://forums.speedlife.net/u/SilverGT)
#### Post date: [January 21, 2007, 9:10pm UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/3 "2007-01-21T21:10:08Z")
picture would definitly help. RHD = Hottness
---
### Author:  [@articzap](https://forums.speedlife.net/u/articzap)
#### Post date: [January 21, 2007, 10:21pm UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/4 "2007-01-21T22:21:58Z")
pics will deff sell this car just because someone can get an idea of how much work was put into it before it sold.
---
### Author:  [@redrum](https://forums.speedlife.net/u/redrum)
#### Post date: [January 22, 2007, 4:41am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/5 "2007-01-22T04:41:48Z")
price is way high, but a cool project nonetheless.
---
### Author:  [@Zer0DazE](https://forums.speedlife.net/u/Zer0DazE)
#### Post date: [January 22, 2007, 4:47am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/6 "2007-01-22T04:47:50Z")
> [@redrum](#):
>
> price is way high, but a cool project nonetheless.
werd, thats what i sold my turbo hatch for, and it had 1 year old paint.
im willing to bet the seller is taking a huge loss as it is (time and parts).
why not finish the car, toss a d16 in it, and then try to dish it off?
edit:
damn dude, you have the whole project based on your posts in the parts section. you should post up a package deal, you might get more bites.
---
### Author:  [@Bakes](https://forums.speedlife.net/u/Bakes)
#### Post date: [January 22, 2007, 5:36am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/7 "2007-01-22T05:36:01Z")
5k for a RHD CONVERSION shell?
Real steep price for it not being a real RHD and no motor.
---
### Author:  [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [January 22, 2007, 5:37am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/8 "2007-01-22T05:37:03Z")
firewall swap?
please tell me you didn’t cut off the whole front unibody…
---
### Author:  [@JDMSIR](https://forums.speedlife.net/u/JDMSIR)
#### Post date: [January 22, 2007, 5:39am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/9 "2007-01-22T05:39:49Z")
It was a firewalll swap done by a collision shop, they actually did a reliable job. But $5000 is a little high.
---
### Author:  [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [January 22, 2007, 5:42am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/10 "2007-01-22T05:42:40Z")
did you get a RHD main (passenger compartment) harness or mod the existing one?
---
### Author:  [@JDMSIR](https://forums.speedlife.net/u/JDMSIR)
#### Post date: [January 22, 2007, 5:44am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/11 "2007-01-22T05:44:30Z")
I think he flipped the one that was in the car, and then did some mods. I dont know why I am answering for him I will let him do the talking.
---
### Author:  [@woz](https://forums.speedlife.net/u/woz)
#### Post date: [January 22, 2007, 6:35am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/12 "2007-01-22T06:35:31Z")
what kind of sparcos are they? is there a harness bar or cage? what kind of coilovers?
that stuff could make a slight diff but still 5k is high
---
### Author:  [@myHonda1](https://forums.speedlife.net/u/myHonda1)
#### Post date: [January 22, 2007, 6:59am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/13 "2007-01-22T06:59:10Z")
i would definetly like to see some pics of this…
---
### Author:  [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [January 22, 2007, 7:01am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/14 "2007-01-22T07:01:53Z")
want to part the seats and harnesses… depending on style…
---
### Author:  [@JDMSIR](https://forums.speedlife.net/u/JDMSIR)
#### Post date: [January 22, 2007, 7:20am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/15 "2007-01-22T07:20:58Z")
They are red buckets.
---
### Author:  [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [January 22, 2007, 7:25am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/16 "2007-01-22T07:25:12Z")
> [@JDMSIR](#):
>
> They are red buckets.
i’m more interested in what style…
---
### Author:  [@JDMSIR](https://forums.speedlife.net/u/JDMSIR)
#### Post date: [January 22, 2007, 7:35am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/17 "2007-01-22T07:35:02Z")
I think they are sprints
---
### Author:  [@newman](https://forums.speedlife.net/u/newman)
#### Post date: [January 22, 2007, 7:43am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/18 "2007-01-22T07:43:14Z")
i’ll wait for the OP to determine if he wants to part…
but i am interested in condition and model…
---
### Author:  [@layzie](https://forums.speedlife.net/u/layzie)
#### Post date: [January 22, 2007, 8:58am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/19 "2007-01-22T08:58:18Z")
little steep for no paint and motor but a good project. if i wanted to shift with my left hand i would have picked this up
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [January 22, 2007, 9:10am UTC](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394/20 "2007-01-22T09:10:27Z")
interested but need to see pics.
[Next page](https://forums.speedlife.net/t/fs-95-civic-rhd-sirii-shell-pix-up/23394.md?page=2)