# FS: Alpine MRP-F240

**URL:** <https://forums.speedlife.net/t/fs-alpine-mrp-f240/65764>\
**Category:** Classifieds\
**Created:** [April 7, 2009, 7:34am UTC](https://forums.speedlife.net/t/fs-alpine-mrp-f240/65764 "2009-04-07T07:34:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bakes](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bakes/32/7469_2.png) [@Bakes](https://forums.speedlife.net/u/Bakes)\
**Post date:** [April 7, 2009, 7:34am UTC](https://forums.speedlife.net/t/fs-alpine-mrp-f240/65764/1 "2009-04-07T07:34:38Z")

</div>

Alpine MRP-F240 4/3/2 channel amp.  
Works perfectly, dirty and a few chips, nothing out of the ordinary.  
I’ve got 4 amps, just don’t need this in my collection.  
$100/BO shipped  
Money order or bank check only. I’m PayPal verified but I’m TIRED of PayPal dipping any more into my pockets.

> Details:  
> \* 40 watts RMS x 4 at 4 ohms  
> \* 50 watts RMS x 4 at 2 ohms  
> \* 100 watts RMS x 2 bridged output at 4 ohms  
> \* 2-, 3-, or 4-channel output  
> \* 4-ohm stable in bridged mode  
> \* Tri-way capable (Tri-Way crossover required)  
> \* requires 10-gauge power and ground leads — wiring and hardware not included with amplifier  
> \* selectable high-pass/low-pass crossover at 80 Hz, 18 dB/octave (2 separate crossovers, one for channels 1 & 2, another for channels 3 & 4)  
> \* subsonic filter at 15 Hz for channels 3 & 4  
> \* tuned Bass EQ (0-12 dB bass boost at 50 Hz) for channels 3 & 4  
> \* preamp outputs  
> \* MOSFET power supply  
> \* STAR Topology (minimizes internal noise and prevents ground interference)  
> \* speaker- and preamp-level inputs

---

<div class="post-metadata">

**Author:** ![Bakes](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bakes/32/7469_2.png) [@Bakes](https://forums.speedlife.net/u/Bakes)\
**Post date:** [April 9, 2009, 8:10am UTC](https://forums.speedlife.net/t/fs-alpine-mrp-f240/65764/2 "2009-04-09T08:10:26Z")

</div>

From 3 pages back …_bump_