# FS: Chevy 383 Stroker, Complete (carb to pan) & Turbo 350 Trans **URL:** \ **Category:** Classifieds\ **Created:** [May 28, 2008, 8:38pm UTC](https://forums.speedlife.net/t/fs-chevy-383-stroker-complete-carb-to-pan-turbo-350-trans/49184 "2008-05-28T20:38:41Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![FiftyCheven](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fiftycheven/32/4950_2.png) [@FiftyCheven](https://forums.speedlife.net/u/FiftyCheven)\ **Post date:** [May 28, 2008, 8:38pm UTC](https://forums.speedlife.net/t/fs-chevy-383-stroker-complete-carb-to-pan-turbo-350-trans/49184/1 "2008-05-28T20:38:41Z")
Listing for a friend… Motor is pretty fresh…only had track use, was just gone through recently and came back with a 100% clean bill of health. Built by KTR Race Engines Dynoed at 600 hp has been n/a all its life 383 stroker Callies Crank Manley light weight H-Beam rods Mahle Pistons Comp Cams 4/7 swap Roller Cam (264 intake, 270 exhaust, 106 lobe sep. 630 lift) Comp Cams Roller Lifter Comp Cams Pushrods Comp Cams Springs, retainers & locks Comp Cams Pro Magnum Roller Rockers Rocker Stud Girdle Manley studs & guide plates Cloyes hex-a-just Chain & cover ARP head Bolts Felpro Gaskets Melling HV Oil Pump 13:1 compression (i think) Dart Heads Dart intake Brand new QFT 850 carb CSR Electric water pump MSD Billet Distributor MSD Wires Clevite Fluid Damper 2" carb spacer Canton pan & pickup Billet “chevy power” valve covers etc etc…headers are custom for the car, and not included. Still in car and can hear run anytime. (will only take 1 hour to remove) Only ran with Royal Purple XPR oil. Asking $5500 for motor ![http://i18.ebayimg.com/02/i/000/f1/be/365d_1.JPG](http://i18.ebayimg.com/02/i/000/f1/be/365d_1.JPG) Next up is a built Turbo 350 Trans Manual valve body Pro trans brake JW Ultra Bell May throw in flex-a-lite trans cooler with AN lines & converter Built by Competition Transmission Asking $1300 No pics right now… If interested, i can get all the specs from the build sheets and put you in contact with the owner. ---
**Author:** ![FiftyCheven](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fiftycheven/32/4950_2.png) [@FiftyCheven](https://forums.speedlife.net/u/FiftyCheven)\ **Post date:** [May 29, 2008, 12:30pm UTC](https://forums.speedlife.net/t/fs-chevy-383-stroker-complete-carb-to-pan-turbo-350-trans/49184/2 "2008-05-29T12:30:44Z")
bump for adding specs ---
**Author:** ![JEG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeg/32/7246_2.png) [@JEG](https://forums.speedlife.net/u/JEG)\ **Post date:** [May 29, 2008, 3:46pm UTC](https://forums.speedlife.net/t/fs-chevy-383-stroker-complete-carb-to-pan-turbo-350-trans/49184/3 "2008-05-29T15:46:37Z")
Do you have any other spare 350 parts? ---
**Author:** ![FiftyCheven](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fiftycheven/32/4950_2.png) [@FiftyCheven](https://forums.speedlife.net/u/FiftyCheven)\ **Post date:** [May 29, 2008, 4:07pm UTC](https://forums.speedlife.net/t/fs-chevy-383-stroker-complete-carb-to-pan-turbo-350-trans/49184/4 "2008-05-29T16:07:15Z")
nope…not parting out motor either. selling complete. ---
**Author:** ![JEG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeg/32/7246_2.png) [@JEG](https://forums.speedlife.net/u/JEG)\ **Post date:** [May 29, 2008, 4:09pm UTC](https://forums.speedlife.net/t/fs-chevy-383-stroker-complete-carb-to-pan-turbo-350-trans/49184/5 "2008-05-29T16:09:34Z")
k nm then man. GLWS! Thats a killer motor.