# FS: Direct Lift Pro 9,000 lb 2 post lift **URL:** \ **Category:** Classifieds\ **Created:** [July 11, 2011, 12:51pm UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366 "2011-07-11T12:51:30Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![GearheadNY.com](https://avatars.discourse-cdn.com/v4/letter/g/9de053/32.png) [@GearheadNY.com](https://forums.speedlife.net/u/GearheadNY.com)\ **Post date:** [July 11, 2011, 12:51pm UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/1 "2011-07-11T12:51:30Z")
For sale is a lightly used 2 Post vehicle lift from Direct Lift. This is a very nice unit that I had purchased about 1 and a half years ago and has been used in a light duty automotive setting. It is capable of lifting 9000 lbs and is good for most cars, trucks, and SUVs out there. It has the Truck height adapters for the lift arms as well as rubber lift pads. It is perfect for anyone with a touch less than 10’ of ceiling height because it stands roughly 9’3" tall and can lift your vehicles nearly 7’ up. Requires a minimum of 4" of concrete with 3000 psi. You can get nearly any height vehicle on this lift, just keep in mind there is a ~3" tall base plate. Please email me with an email titled appropriately so I know what you are asking for. I can supply more pictures if you’d like, or we can schedule a visit to take a look at it. It is still assembled and working so you can actually see it work before you buy. $2,000 I can also include with the lift for an additional charge of $100 a nearly brand new transmission jack used 2 times. Direct Lift Pro 9F Specifications Capacity 9,000 LB. Overall Height 111" (9’ 3") Overall Floor Width 138 1/2" (11’ 6 1/2") Outside Column to Outside Column 122" (10’ 2") Maximum Lift Height 82" (6’ 10") Minimum Pad Height 3 1/2" inches Base Plate Width 15 3/4" inches Inside Column 107" (8’ 11") Drive Thru 97 1/4" (8’ 1 1/4") Column Size 14 1/2" x 7 1/2" Column Thickness of Steel 2 gauge (.24", 5mm) Cable Diameter .375" Base Of Lift (17 1/2" x 20 1/2" inches) Motor/Electrical Requirement 2HP, 220 volt single (1) phase A 30 amp breaker is recommended ---
**Author:** ![GearheadNY.com](https://avatars.discourse-cdn.com/v4/letter/g/9de053/32.png) [@GearheadNY.com](https://forums.speedlife.net/u/GearheadNY.com)\ **Post date:** [July 11, 2011, 12:53pm UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/2 "2011-07-11T12:53:12Z")
![http://www.gearheadny.com/images/vehicles/M3Med/IMG_1166%20(Medium).JPG](http://www.gearheadny.com/images/vehicles/M3Med/IMG_1166%20(Medium).JPG) M3 not for sale yet 😉 ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [July 11, 2011, 12:54pm UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/3 "2011-07-11T12:54:12Z")
Price? ---
**Author:** ![GearheadNY.com](https://avatars.discourse-cdn.com/v4/letter/g/9de053/32.png) [@GearheadNY.com](https://forums.speedlife.net/u/GearheadNY.com)\ **Post date:** [July 11, 2011, 1:00pm UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/4 "2011-07-11T13:00:01Z")
Just edited it in there. 2,000 obo. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [July 11, 2011, 1:18pm UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/5 "2011-07-11T13:18:24Z")
Very nice unit (no homo). I gots a Pro10, works like a champ! GLWS man! ---
**Author:** ![GearheadNY.com](https://avatars.discourse-cdn.com/v4/letter/g/9de053/32.png) [@GearheadNY.com](https://forums.speedlife.net/u/GearheadNY.com)\ **Post date:** [July 11, 2011, 1:32pm UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/6 "2011-07-11T13:32:05Z")
LOL, Yeah, this thing has been nothing but good to me since I purchased it. Just looking for it to go to another good home since it’s too big for the new garage… ☹ ---
**Author:** ![elmalouno](https://avatars.discourse-cdn.com/v4/letter/e/848f3c/32.png) [@elmalouno](https://forums.speedlife.net/u/elmalouno)\ **Post date:** [July 11, 2011, 7:48pm UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/7 "2011-07-11T19:48:16Z")
on their website this model retails for $1,995. any reason your lightly used lift is 5 bucks more? perhaps some stickers are included? ---
**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\ **Post date:** [July 11, 2011, 8:54pm UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/8 "2011-07-11T20:54:03Z")
> [@LS1 Tech Find: RX-7](https://forums.speedlife.net/t/ls1-tech-find-rx-7/43768/21): > > on their website this model retails for $1,995. any reason your lightly used lift is 5 bucks more? perhaps some stickers are included? factor in shipping costs as well. ---
**Author:** ![GearheadNY.com](https://avatars.discourse-cdn.com/v4/letter/g/9de053/32.png) [@GearheadNY.com](https://forums.speedlife.net/u/GearheadNY.com)\ **Post date:** [July 12, 2011, 5:41am UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/9 "2011-07-12T05:41:44Z")
> [@LS1 Tech Find: RX-7](https://forums.speedlife.net/t/ls1-tech-find-rx-7/43768/21): > > on their website this model retails for $1,995. any reason your lightly used lift is 5 bucks more? perhaps some stickers are included? Add 4-500 for shipping and unloading services. It’s not cheap so you’re saving over 400 already on that part, and it’s not the cheap version of this lift, this one cost me 2100. It’s not my first time dealing with selling parts brah. ---
**Author:** ![HANSTECH](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hanstech/32/6445_2.png) [@HANSTECH](https://forums.speedlife.net/u/HANSTECH)\ **Post date:** [July 12, 2011, 6:03am UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/10 "2011-07-12T06:03:17Z")
NO!!! sucks it wont fit in the new garage. cut open roof? lol. glws J. ---
**Author:** ![GearheadNY.com](https://avatars.discourse-cdn.com/v4/letter/g/9de053/32.png) [@GearheadNY.com](https://forums.speedlife.net/u/GearheadNY.com)\ **Post date:** [July 12, 2011, 6:15am UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/11 "2011-07-12T06:15:20Z")
lol, nah the footprint is too big. 28.5’ garage and a lift that has an 11.6’ footprint… weksos… I’d lose 1 of my 3 bays ☹ BTW I’m looking for best offer as well. I’m pretty flexible, it’s gotta go at some point! ---
**Author:** ![slwrthnu](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slwrthnu/32/6296_2.png) [@slwrthnu](https://forums.speedlife.net/u/slwrthnu)\ **Post date:** [July 12, 2011, 12:07pm UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/12 "2011-07-12T12:07:55Z")
dope lift, glws ---
**Author:** ![elmalouno](https://avatars.discourse-cdn.com/v4/letter/e/848f3c/32.png) [@elmalouno](https://forums.speedlife.net/u/elmalouno)\ **Post date:** [July 12, 2011, 4:16pm UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/13 "2011-07-12T16:16:36Z")
i’ll offer 1400. ---
**Author:** ![GearheadNY.com](https://avatars.discourse-cdn.com/v4/letter/g/9de053/32.png) [@GearheadNY.com](https://forums.speedlife.net/u/GearheadNY.com)\ **Post date:** [July 12, 2011, 6:12pm UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/14 "2011-07-12T18:12:57Z")
Not a bad offer, I’ll take that into consideration. However, I am looking for a bit more than that. If you’re serious about a purchase please PM me. ---
**Author:** ![elmalouno](https://avatars.discourse-cdn.com/v4/letter/e/848f3c/32.png) [@elmalouno](https://forums.speedlife.net/u/elmalouno)\ **Post date:** [July 12, 2011, 6:35pm UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/15 "2011-07-12T18:35:44Z")
pmed. ---
**Author:** ![GearheadNY.com](https://avatars.discourse-cdn.com/v4/letter/g/9de053/32.png) [@GearheadNY.com](https://forums.speedlife.net/u/GearheadNY.com)\ **Post date:** [July 14, 2011, 5:56am UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/16 "2011-07-14T05:56:13Z")
To the top for the AM! ---
**Author:** ![GearheadNY.com](https://avatars.discourse-cdn.com/v4/letter/g/9de053/32.png) [@GearheadNY.com](https://forums.speedlife.net/u/GearheadNY.com)\ **Post date:** [July 15, 2011, 8:05am UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/17 "2011-07-15T08:05:02Z")
:tbu ---
**Author:** ![GearheadNY.com](https://avatars.discourse-cdn.com/v4/letter/g/9de053/32.png) [@GearheadNY.com](https://forums.speedlife.net/u/GearheadNY.com)\ **Post date:** [July 18, 2011, 12:57pm UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/18 "2011-07-18T12:57:48Z")
Figured I’d drop the price some. For those who are interested, but still afraid: $1800 ---
**Author:** ![JRubino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jrubino/32/6285_2.png) [@JRubino](https://forums.speedlife.net/u/JRubino)\ **Post date:** [July 21, 2011, 8:30am UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/19 "2011-07-21T08:30:50Z")
hmmmm ---
**Author:** ![GearheadNY.com](https://avatars.discourse-cdn.com/v4/letter/g/9de053/32.png) [@GearheadNY.com](https://forums.speedlife.net/u/GearheadNY.com)\ **Post date:** [July 21, 2011, 9:06am UTC](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366/20 "2011-07-21T09:06:57Z")
Something to consider! [Next page](https://forums.speedlife.net/t/fs-direct-lift-pro-9-000-lb-2-post-lift/259366.md?page=2)