# FS:  e46 bmw projectors

**URL:** <https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579>\
**Category:** Classifieds\
**Created:** [January 25, 2007, 11:18am UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579 "2007-01-25T11:18:17Z")\
**Posts on this page:** 16\
**Page:** 3

<div class="post-metadata">

**Author:** ![layzie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/layzie/32/7599_2.png) [@layzie](https://forums.speedlife.net/u/layzie)\
**Post date:** [March 19, 2007, 12:10pm UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/41 "2007-03-19T12:10:43Z")

</div>

its hot, check out [hidplanet.com](http://hidplanet.com) lots of people have done quad set ups.

---

<div class="post-metadata">

**Author:** ![Mr\_T](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mr_t/32/7454_2.png) [@Mr\_T](https://forums.speedlife.net/u/Mr_T)\
**Post date:** [March 19, 2007, 12:35pm UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/42 "2007-03-19T12:35:32Z")

</div>

how hard would these be to fit them in my teg and get bulbs for them?

---

<div class="post-metadata">

**Author:** ![layzie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/layzie/32/7599_2.png) [@layzie](https://forums.speedlife.net/u/layzie)\
**Post date:** [March 19, 2007, 7:32pm UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/43 "2007-03-19T19:32:37Z")

</div>

you wont find halogen bulbs for them, they will need to be d2s, the retro fit isnt hard for tegs

---

<div class="post-metadata">

**Author:** ![L8APEX1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/l8apex1/32/7276_2.png) [@L8APEX1](https://forums.speedlife.net/u/L8APEX1)\
**Post date:** [March 19, 2007, 8:35pm UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/44 "2007-03-19T20:35:07Z")

</div>

ok again i’ll ask how deep are they from the inside of the mounting flange to the tip of the projector. i have an older car that has very shallow housings. i don’t want them to be too close.

---

<div class="post-metadata">

**Author:** ![layzie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/layzie/32/7599_2.png) [@layzie](https://forums.speedlife.net/u/layzie)\
**Post date:** [March 20, 2007, 8:46am UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/45 "2007-03-20T08:46:38Z")

</div>

from the flange to the tip of the glass its 3 inches

---

<div class="post-metadata">

**Author:** ![L8APEX1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/l8apex1/32/7276_2.png) [@L8APEX1](https://forums.speedlife.net/u/L8APEX1)\
**Post date:** [March 20, 2007, 9:02am UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/46 "2007-03-20T09:02:08Z")

</div>

i’ll take a look at my headlights and see exactly how deep they are

---

<div class="post-metadata">

**Author:** ![layzie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/layzie/32/7599_2.png) [@layzie](https://forums.speedlife.net/u/layzie)\
**Post date:** [March 20, 2007, 9:13am UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/47 "2007-03-20T09:13:10Z")

</div>

what do you have? these are one of the smaller projectors.

---

<div class="post-metadata">

**Author:** ![L8APEX1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/l8apex1/32/7276_2.png) [@L8APEX1](https://forums.speedlife.net/u/L8APEX1)\
**Post date:** [March 22, 2007, 8:28am UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/48 "2007-03-22T08:28:03Z")

</div>

the lights would be going in a 1982 corvette (low beam obviously) i know they are very shallow housings and i think it would be a little too close.

---

<div class="post-metadata">

**Author:** ![L8APEX1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/l8apex1/32/7276_2.png) [@L8APEX1](https://forums.speedlife.net/u/L8APEX1)\
**Post date:** [March 22, 2007, 8:30am UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/49 "2007-03-22T08:30:22Z")

</div>

i just went out and the whole housing is less than 3" deep the interior is about 2 1/2" deep

---

<div class="post-metadata">

**Author:** ![layzie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/layzie/32/7599_2.png) [@layzie](https://forums.speedlife.net/u/layzie)\
**Post date:** [March 22, 2007, 9:36am UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/50 "2007-03-22T09:36:30Z")

</div>

so u put the flange on the outside bolted with the lense on the inside. its not that hard, ive seen them put in 67 mustang before with very shallow headlights.

---

<div class="post-metadata">

**Author:** ![layzie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/layzie/32/7599_2.png) [@layzie](https://forums.speedlife.net/u/layzie)\
**Post date:** [March 22, 2007, 4:37pm UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/51 "2007-03-22T16:37:15Z")

</div>

There is a guy retro fitting projectors into a 86 mazda, im sure you could fit these.

bump before i am forced to ship them to Ireland.

---

<div class="post-metadata">

**Author:** ![newman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/newman/32/7569_2.png) [@newman](https://forums.speedlife.net/u/newman)\
**Post date:** [March 22, 2007, 4:38pm UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/52 "2007-03-22T16:38:18Z")

</div>

what’s the price down to now?

---

<div class="post-metadata">

**Author:** ![layzie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/layzie/32/7599_2.png) [@layzie](https://forums.speedlife.net/u/layzie)\
**Post date:** [March 22, 2007, 4:40pm UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/53 "2007-03-22T16:40:24Z")

</div>

90

---

<div class="post-metadata">

**Author:** ![Tunerfreak](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tunerfreak/32/7427_2.png) [@Tunerfreak](https://forums.speedlife.net/u/Tunerfreak)\
**Post date:** [March 22, 2007, 5:57pm UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/54 "2007-03-22T17:57:22Z")

</div>

i will let you know later when i get home. i might have to get them to get a head start on my retrofit while i wait for my kit to come in

---

<div class="post-metadata">

**Author:** ![Tunerfreak](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tunerfreak/32/7427_2.png) [@Tunerfreak](https://forums.speedlife.net/u/Tunerfreak)\
**Post date:** [March 22, 2007, 7:48pm UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/55 "2007-03-22T19:48:39Z")

</div>

i will take em pm sent

---

<div class="post-metadata">

**Author:** ![layzie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/layzie/32/7599_2.png) [@layzie](https://forums.speedlife.net/u/layzie)\
**Post date:** [March 23, 2007, 12:01pm UTC](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579/56 "2007-03-23T12:01:52Z")

</div>

sold to tunerfreak

[Previous page](https://forums.speedlife.net/t/fs-e46-bmw-projectors/23579.md?page=2)
