# FS: EDELBROCK RPM HEADS FOR SBC FULLY PORTED

**URL:** <https://forums.speedlife.net/t/fs-edelbrock-rpm-heads-for-sbc-fully-ported/22937>\
**Category:** Classifieds\
**Created:** [January 11, 2007, 6:43pm UTC](https://forums.speedlife.net/t/fs-edelbrock-rpm-heads-for-sbc-fully-ported/22937 "2007-01-11T18:43:12Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JRODF203](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jrodf203/32/5024_2.png) [@JRODF203](https://forums.speedlife.net/u/JRODF203)\
**Post date:** [January 11, 2007, 6:43pm UTC](https://forums.speedlife.net/t/fs-edelbrock-rpm-heads-for-sbc-fully-ported/22937/1 "2007-01-11T18:43:12Z")

</div>

Edelbrock RPM, 70cc combustion chambers, straight plug, ported. Heads have gone 7.38’s in 1/8 on stock bottom end, flat top piston truck motor. Upgraded to AFR’s. $800 for heads and Crane Roller Rockers. Bolt on and go. Also have air gap intake FS. Let me know, can show pic if you want to see.

---

<div class="post-metadata">

**Author:** ![lvcracing](https://avatars.discourse-cdn.com/v4/letter/l/f17d59/32.png) [@lvcracing](https://forums.speedlife.net/u/lvcracing)\
**Post date:** [January 11, 2007, 7:12pm UTC](https://forums.speedlife.net/t/fs-edelbrock-rpm-heads-for-sbc-fully-ported/22937/2 "2007-01-11T19:12:09Z")

</div>

are these pre or post 87’s?

---

<div class="post-metadata">

**Author:** ![JRODF203](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jrodf203/32/5024_2.png) [@JRODF203](https://forums.speedlife.net/u/JRODF203)\
**Post date:** [January 11, 2007, 8:46pm UTC](https://forums.speedlife.net/t/fs-edelbrock-rpm-heads-for-sbc-fully-ported/22937/3 "2007-01-11T20:46:34Z")

</div>

Pre 1987.