# FS: Forged 346" LS1 Rods and Pistons

**URL:** <https://forums.speedlife.net/t/fs-forged-346-ls1-rods-and-pistons/34646>\
**Category:** Classifieds\
**Created:** [August 30, 2007, 7:12pm UTC](https://forums.speedlife.net/t/fs-forged-346-ls1-rods-and-pistons/34646 "2007-08-30T19:12:26Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\
**Post date:** [August 30, 2007, 7:12pm UTC](https://forums.speedlife.net/t/fs-forged-346-ls1-rods-and-pistons/34646/1 "2007-08-30T19:12:26Z")

</div>

These are forged rods and pistons for a 5.7L LS1/6. The downside is that these are not a common length Rod used in LS1 stuff, so they wont match up with a lot of the shelf stuff out there. The good news is, these Rods and Pistons are a matching combo.

Scat H-Beam Forged Connecting Rod  
6.100" \<----(not as common as the 6.125" length, but match these pistons)  
.927"  
ARP 8740 bolts

Probe Forged Piston  
3.905"  
13.7cc Dish  
.927" x 2.50"

The Rods were used in my 900HP Application without fault. The Pistons were take-outs after I went to Iron. The nice thing about the Probes is that they have a thick top ring down, especially for a shelf piston, which is something your really want in a boosted motor

with 69cc heads, and .041" gasket, i believe these achieved 8.7:1 SCR

looking for $400

---

<div class="post-metadata">

**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\
**Post date:** [September 5, 2007, 6:58pm UTC](https://forums.speedlife.net/t/fs-forged-346-ls1-rods-and-pistons/34646/2 "2007-09-05T18:58:28Z")

</div>

bump. all parts are solid. perfect for a budget LS1 boost setup, and can hold a lot of power. smokin deal

---

<div class="post-metadata">

**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\
**Post date:** [October 28, 2007, 9:27am UTC](https://forums.speedlife.net/t/fs-forged-346-ls1-rods-and-pistons/34646/3 "2007-10-28T09:27:44Z")

</div>

wrist pins included  
may have a buyer, but here are some BIG pictures if that falls through:

 ![http://i3.photobucket.com/albums/y78/TurboLS1ss/IMG_0032.jpg](http://i3.photobucket.com/albums/y78/TurboLS1ss/IMG_0032.jpg)

 ![http://i3.photobucket.com/albums/y78/TurboLS1ss/IMG_0031.jpg](http://i3.photobucket.com/albums/y78/TurboLS1ss/IMG_0031.jpg)

---

<div class="post-metadata">

**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\
**Post date:** [October 31, 2007, 3:51pm UTC](https://forums.speedlife.net/t/fs-forged-346-ls1-rods-and-pistons/34646/4 "2007-10-31T15:51:58Z")

</div>

who wants to go fast?

i want to go fast

who else wants to go fast?

turtles

---

<div class="post-metadata">

**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\
**Post date:** [November 19, 2007, 9:39pm UTC](https://forums.speedlife.net/t/fs-forged-346-ls1-rods-and-pistons/34646/5 "2007-11-19T21:39:51Z")

</div>

another item that lasted under a day on ls1tech. \< 1 hour this time. :thankyou:

close 🙂