# FS: GSR Bottom end **URL:** \ **Category:** Classifieds\ **Created:** [April 14, 2009, 7:12pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175 "2009-04-14T19:12:05Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [April 14, 2009, 7:12pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/1 "2009-04-14T19:12:05Z")
comes with oil pan, crank, pistons, rods, crank pulley, alternator, drivers side motor mount, dipstick has 75k on it, clyinder walls need to be honed, and it could use a good cleaning on the outside 🙂 everything is full assembled looking for 400obo dont bother with the extreme lowballs because i can probably part this thing out and ask more than im asking was told it ran fine when it was pulled ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [April 14, 2009, 7:13pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/2 "2009-04-14T19:13:39Z")
you say it ran fine, yet you say it needs cylinder walls honed? will this need a rebuild or does it burn oil? ---
**Author:** ![jdmf23accord](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdmf23accord/32/4979_2.png) [@jdmf23accord](https://forums.speedlife.net/u/jdmf23accord)\ **Post date:** [April 14, 2009, 7:14pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/3 "2009-04-14T19:14:29Z")
will you sell me the block w/o rods and pistons for 200 ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [April 14, 2009, 7:15pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/4 "2009-04-14T19:15:48Z")
there is surface “rust” on the walls, it’s at the top of 1 &4, idk about 2&3 ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [April 14, 2009, 7:16pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/5 "2009-04-14T19:16:51Z")
> [@jdmf23accord](#): > > will you sell me the block w/o rods and pistons for 200 i forgot what you wanted from this… ill sell you the crank for 125 met up in batavia again, i just have to tear it apart ---
**Author:** ![jdmf23accord](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdmf23accord/32/4979_2.png) [@jdmf23accord](https://forums.speedlife.net/u/jdmf23accord)\ **Post date:** [April 14, 2009, 7:22pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/6 "2009-04-14T19:22:21Z")
i want everything but the rods and pistons ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [April 14, 2009, 7:29pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/7 "2009-04-14T19:29:27Z")
well i wouldnt get the other 200$ from rods and pistons lol :meh: if i decide to part out ill let you know. ---
**Author:** ![jdmf23accord](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdmf23accord/32/4979_2.png) [@jdmf23accord](https://forums.speedlife.net/u/jdmf23accord)\ **Post date:** [April 14, 2009, 7:32pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/8 "2009-04-14T19:32:08Z")
well either way lmk ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [April 14, 2009, 7:32pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/9 "2009-04-14T19:32:37Z")
would u be interested in just the crank? ---
**Author:** ![jdmf23accord](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdmf23accord/32/4979_2.png) [@jdmf23accord](https://forums.speedlife.net/u/jdmf23accord)\ **Post date:** [April 14, 2009, 7:53pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/10 "2009-04-14T19:53:10Z")
nope ---
**Author:** ![Birdman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/birdman/32/5186_2.png) [@Birdman](https://forums.speedlife.net/u/Birdman)\ **Post date:** [April 14, 2009, 8:51pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/11 "2009-04-14T20:51:34Z")
> [@deebo](#): > > there is surface “rust” on the walls, it’s at the top of 1 &4, idk about 2&3 If its just on the top of the cylinders thats kinda normal from cylinder wear and it could be cleaned up with a ridge reamer it would not need to be completly honed unless theres rust build up in the whole cylinder ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [April 14, 2009, 8:55pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/12 "2009-04-14T20:55:54Z")
> [@Birdman](#): > > If its just on the top of the cylinders thats kinda normal from cylinder wear and it could be cleaned up with a ridge reamer it would not need to be completly honed unless theres rust build up in the whole cylinder i honestly havent even looked at it in like 2months lol, it’s been sitting in my garage sealed so i cant remember i should have sent it to you at school to get cleaned up 😉 ---
**Author:** ![Birdman](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/birdman/32/5186_2.png) [@Birdman](https://forums.speedlife.net/u/Birdman)\ **Post date:** [April 14, 2009, 9:01pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/13 "2009-04-14T21:01:51Z")
> [@deebo](#): > > i honestly havent even looked at it in like 2months lol, it’s been sitting in my garage sealed so i cant remember > > i should have sent it to you at school to get cleaned up 😉 If you want to il def do it for you, just let me know, I could get it next time im in town or you could always drop it off at school its only like an hour and half ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [April 18, 2009, 6:33pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/14 "2009-04-18T18:33:32Z")
bump ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [April 19, 2009, 1:10pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/15 "2009-04-19T13:10:50Z")
sorry for the bump, but i started dissambling everything (kinda), and i rotated the crank and there is no rust whatso ever below about an inch of 1 & 4, and 2&3 have none at all i would still get the walls honed tho it has full oil, and it’s not milky whatsoever, i also pulled apart the t-stat housing and the oring was perfect, tstat looked good(but i threw it out), and the coolant was perfectly green ---
**Author:** ![99\_civic\_si](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/99_civic_si/32/7319_2.png) [@99\_civic\_si](https://forums.speedlife.net/u/99_civic_si)\ **Post date:** [April 19, 2009, 8:55pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/16 "2009-04-19T20:55:58Z")
how do the water jackets look? any build-up in there, ie. white shit or rusty looking brown/black shit? ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [April 20, 2009, 4:17pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/17 "2009-04-20T16:17:35Z")
pm’d you andy… ---
**Author:** ![shocker911](https://avatars.discourse-cdn.com/v4/letter/s/c0e974/32.png) [@shocker911](https://forums.speedlife.net/u/shocker911)\ **Post date:** [April 20, 2009, 4:31pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/18 "2009-04-20T16:31:41Z")
hmmmm when my loan comes through ill get ahold of you could be the start of my new project ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [April 20, 2009, 4:34pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/19 "2009-04-20T16:34:51Z")
cool let me know! i would love to save this, but i’m in need of money right now, if it doesnt sell by the time school ends in 2weeks and im working full time again i will probably just end up saving it for winter ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [April 25, 2009, 5:31pm UTC](https://forums.speedlife.net/t/fs-gsr-bottom-end/66175/20 "2009-04-25T17:31:15Z")
bump 300$ firm