# FS: GT2871R and Tial GT28 Stainless Steel V-band housing with flanges (new)
**URL:** https://forums.speedlife.net/t/fs-gt2871r-and-tial-gt28-stainless-steel-v-band-housing-with-flanges-new/213980
**Category:** Classifieds
**Created:** [June 28, 2011, 1:59pm UTC](https://forums.speedlife.net/t/fs-gt2871r-and-tial-gt28-stainless-steel-v-band-housing-with-flanges-new/213980 "2011-06-28T13:59:34Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [June 28, 2011, 1:59pm UTC](https://forums.speedlife.net/t/fs-gt2871r-and-tial-gt28-stainless-steel-v-band-housing-with-flanges-new/213980/1 "2011-06-28T13:59:34Z")
I’m selling a 50 A/R compressor housing as well as a brand new GT28 Tial housing with all associated V-bands and flanges.
**GT2871R CHRA: Sold
T04E 50A/R M12 Compressor housing: $75
Tial SS Exhaust housing w/all accessories: $400**
Located in FT. Benning GA
The tial housing;
This was purchased new as a kit with all the flanges and V-bands needed for fabricating a manifold and downpipe. These cost a bit more than normal V-bands and V-band flanges because they have a small lip that lock them together. No others will work with the housing.
Garrett T04E 50 A/R Compressor housing:
This is the compressor housing that the turbo came with when I purchased it. I realize potential buyers may not have a use for it and therefore I am offering it as a cheap add-on rather than requiring a buyer of the CHRA to purchase it as well.
----------------------------------------------SOLD----------------------------
SOLD
[ ](http://img.photobucket.com/albums/v638/Mafdark/2011-06-27/IMG_0430.jpg)
full specs here: [http://www.turbobygarrett.com/turbobygarrett/images/catalog/Turbochargers/gt28\_pdfs/GT2871R\_743347\_2.pdf](http://www.turbobygarrett.com/turbobygarrett/images/catalog/Turbochargers/gt28_pdfs/GT2871R_743347_2.pdf)
As the PDF describes the cartridge came with the 743347-2 and 743347-4 turbos straight from Garrett. Below is a summary and details of each turbo:
-
```
Ball bearing
```
-
```
Oil & Water-cooled bearing system
```
-
```
Direct replacement upgrade turbocharger for GT2860RS (739548-1)
```
-
```
Comes as a kit; end housings are not assembled onto CHRA
```
-
```
743347-4 features a low boost actuator adjustable down to 6 psi
```
-
```
743347-2 features a high boost actuator adjustable down to 12 psi
```
-
```
T25 turbine inlet flange
```
-
```
Great size for applications w/ packaging constraints
```
-
```
Ideal for smaller displacement engines making up to 475 hp
```
-
```
Ideal for twin-turbo applications on medium size engines making up to 800 hp
```
> **[Racing & Performance, Tuning Engines ▷Garrett Motion Turbo® Boosting](https://www.garrettmotion.com/racing-and-performance?utm_campaign=redirect_Day1Garrett)**
>
> Racing Performance Engine ✅ Engine boosting systems ⚫Fuel eficiency ✅Performance benefits to racers. Racing & Performance - Garrett Motion. Tuning & Turbo
> **[Racing & Performance, Tuning Engines ▷Garrett Motion Turbo® Boosting](https://www.garrettmotion.com/racing-and-performance?utm_campaign=redirect_Day1Garrett)**
>
> Racing Performance Engine ✅ Engine boosting systems ⚫Fuel eficiency ✅Performance benefits to racers. Racing & Performance - Garrett Motion. Tuning & Turbo
Now with that out of the way, the turbo itself I bought used to be an upgrade for my GT2860RS but ended up deciding to swap motors instead. When I purchased the turbo it was described as having less than 2000 miles on it and never leaking/blowing oil.
The condition of the turbo reflects this information, all of the compressor and turbine blades look to be in great shape and there is zero shaft play.
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [July 1, 2011, 1:19pm UTC](https://forums.speedlife.net/t/fs-gt2871r-and-tial-gt28-stainless-steel-v-band-housing-with-flanges-new/213980/2 "2011-07-01T13:19:25Z")
CHRA Sold. Housings still available.
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [July 2, 2011, 1:54pm UTC](https://forums.speedlife.net/t/fs-gt2871r-and-tial-gt28-stainless-steel-v-band-housing-with-flanges-new/213980/3 "2011-07-02T13:54:14Z")
I tossed the TiAL housing up on ebay to see if that would help me sell it. Price is greatly reduced for the auction, check it out:
[http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110710107636](http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110710107636)
---
### Author:  [@system](https://forums.speedlife.net/u/system)
#### Post date: [July 10, 2011, 7:01pm UTC](https://forums.speedlife.net/t/fs-gt2871r-and-tial-gt28-stainless-steel-v-band-housing-with-flanges-new/213980/4 "2011-07-10T19:01:44Z")
last day of the auction, still $325