# FS: Honda Seats

**URL:** <https://forums.speedlife.net/t/fs-honda-seats/47988>\
**Category:** Classifieds\
**Created:** [May 6, 2008, 11:49am UTC](https://forums.speedlife.net/t/fs-honda-seats/47988 "2008-05-06T11:49:45Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![camrychick](https://avatars.discourse-cdn.com/v4/letter/c/e79b87/32.png) [@camrychick](https://forums.speedlife.net/u/camrychick)\
**Post date:** [May 6, 2008, 11:49am UTC](https://forums.speedlife.net/t/fs-honda-seats/47988/1 "2008-05-06T11:49:45Z")

</div>

The seats are from a 91 CRX that I was planning to put in an old car. But now I’ve got a teg with automatic seat belts so I’m just trying to get rid of them. Asking $100 OBO

---

<div class="post-metadata">

**Author:** ![JDMSIR](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdmsir/32/7376_2.png) [@JDMSIR](https://forums.speedlife.net/u/JDMSIR)\
**Post date:** [May 6, 2008, 11:51am UTC](https://forums.speedlife.net/t/fs-honda-seats/47988/2 "2008-05-06T11:51:50Z")

</div>

Are there any rips on them. How is the elbow part?

---

<div class="post-metadata">

**Author:** ![Bakes](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bakes/32/7469_2.png) [@Bakes](https://forums.speedlife.net/u/Bakes)\
**Post date:** [May 6, 2008, 12:07pm UTC](https://forums.speedlife.net/t/fs-honda-seats/47988/3 "2008-05-06T12:07:51Z")

</div>

Location?

---

<div class="post-metadata">

**Author:** ![AShort](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ashort/32/4947_2.png) [@AShort](https://forums.speedlife.net/u/AShort)\
**Post date:** [May 6, 2008, 12:11pm UTC](https://forums.speedlife.net/t/fs-honda-seats/47988/4 "2008-05-06T12:11:31Z")

</div>

im interested in these…where are they located?

---

<div class="post-metadata">

**Author:** ![camrychick](https://avatars.discourse-cdn.com/v4/letter/c/e79b87/32.png) [@camrychick](https://forums.speedlife.net/u/camrychick)\
**Post date:** [May 6, 2008, 12:49pm UTC](https://forums.speedlife.net/t/fs-honda-seats/47988/5 "2008-05-06T12:49:17Z")

</div>

I don’t see any rips and the elbow part is fine as well. I’m located in Cheektowaga near Harlem and Maryvale.

---

<div class="post-metadata">

**Author:** ![AShort](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ashort/32/4947_2.png) [@AShort](https://forums.speedlife.net/u/AShort)\
**Post date:** [May 6, 2008, 12:59pm UTC](https://forums.speedlife.net/t/fs-honda-seats/47988/6 "2008-05-06T12:59:27Z")

</div>

88-91 CRX rails are all the same right?

---

<div class="post-metadata">

**Author:** ![Bakes](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bakes/32/7469_2.png) [@Bakes](https://forums.speedlife.net/u/Bakes)\
**Post date:** [May 6, 2008, 1:05pm UTC](https://forums.speedlife.net/t/fs-honda-seats/47988/7 "2008-05-06T13:05:08Z")

</div>

> [@JDMjunkie](#):
>
> 88-91 CRX rails are all the same right?

No.

Match your seats to what type of seatbelts it has.

If your car has door mounted seatbelts, seats from a Crx with pillar  
mounted belts will not bolt up and fit correctly.

Pillar mounted seatbelt CRX’s - All 88-91 JDM/UKDM/EDM Crxs’ and USDM '88 Dx/HF/Si and the '89 Hf will interchange and swap between eachother.

Door mounted seatbelt CRX’s - '89 Dx/Si and all 90/91’s will swap within eachother.

---

<div class="post-metadata">

**Author:** ![camrychick](https://avatars.discourse-cdn.com/v4/letter/c/e79b87/32.png) [@camrychick](https://forums.speedlife.net/u/camrychick)\
**Post date:** [May 6, 2008, 1:27pm UTC](https://forums.speedlife.net/t/fs-honda-seats/47988/8 "2008-05-06T13:27:19Z")

</div>

yep what he said…but They were going to be used in a Teg before it got to be too much hassle to swap stuff but just the same i think the seat rails with minor modification can be made to fit but might not be a direct bolt on

---

<div class="post-metadata">

**Author:** ![Bakes](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bakes/32/7469_2.png) [@Bakes](https://forums.speedlife.net/u/Bakes)\
**Post date:** [May 6, 2008, 2:35pm UTC](https://forums.speedlife.net/t/fs-honda-seats/47988/9 "2008-05-06T14:35:16Z")

</div>

> [@camrychick](#):
>
> i think the seat rails with minor modification can be made to fit but might not be a direct bolt on

Nope. You will need to do a seat pan swap in order to get them to bolt in and mount correctly depending on what you are trying to put them in.

---

<div class="post-metadata">

**Author:** ![camrychick](https://avatars.discourse-cdn.com/v4/letter/c/e79b87/32.png) [@camrychick](https://forums.speedlife.net/u/camrychick)\
**Post date:** [May 7, 2008, 1:21pm UTC](https://forums.speedlife.net/t/fs-honda-seats/47988/10 "2008-05-07T13:21:55Z")

</div>

SOLD!!!

---

<div class="post-metadata">

**Author:** ![Bakes](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bakes/32/7469_2.png) [@Bakes](https://forums.speedlife.net/u/Bakes)\
**Post date:** [May 7, 2008, 3:10pm UTC](https://forums.speedlife.net/t/fs-honda-seats/47988/11 "2008-05-07T15:10:01Z")

</div>

I knew these wouldn’t last long.
