# FS: KLH PSW8 100 Home Subwoofer

**URL:** <https://forums.speedlife.net/t/fs-klh-psw8-100-home-subwoofer/35324>\
**Category:** Classifieds\
**Created:** [September 13, 2007, 3:43pm UTC](https://forums.speedlife.net/t/fs-klh-psw8-100-home-subwoofer/35324 "2007-09-13T15:43:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![FlippyBoy](https://avatars.discourse-cdn.com/v4/letter/f/e274bd/32.png) [@FlippyBoy](https://forums.speedlife.net/u/FlippyBoy)\
**Post date:** [September 13, 2007, 3:43pm UTC](https://forums.speedlife.net/t/fs-klh-psw8-100-home-subwoofer/35324/1 "2007-09-13T15:43:32Z")

</div>

**SOLD**

Pics:

[http://devinsky.com/for\_sale/sub\_front.jpg](http://devinsky.com/for_sale/sub_front.jpg)  
[http://devinsky.com/for\_sale/sub\_back.jpg](http://devinsky.com/for_sale/sub_back.jpg)

8" down-firing woofer, 100 watts RMS amplifier. Used for a few years, now upgrading to something bigger. Still hooked up if you want to audition it. $50

---

<div class="post-metadata">

**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\
**Post date:** [September 13, 2007, 4:06pm UTC](https://forums.speedlife.net/t/fs-klh-psw8-100-home-subwoofer/35324/2 "2007-09-13T16:06:12Z")

</div>

so this has an rca input, then it has the speaker wires set up right off of the back?

i may be very interested provided i sell some of my audio equipment in the next few days.

---

<div class="post-metadata">

**Author:** ![FlippyBoy](https://avatars.discourse-cdn.com/v4/letter/f/e274bd/32.png) [@FlippyBoy](https://forums.speedlife.net/u/FlippyBoy)\
**Post date:** [September 13, 2007, 4:37pm UTC](https://forums.speedlife.net/t/fs-klh-psw8-100-home-subwoofer/35324/3 "2007-09-13T16:37:02Z")

</div>

Its got two inputs, depending on what kind of receiver you have. If your receiver has a sub pre-out, then you can use an rca cable to hook it up. Otherwise, you’ll need to use the speaker-level inputs, which basically means using the sub as a pass-through to the speakers. It then takes the signal as they are going to the speakers. Either way, it should work with almost any setup, and I’d be happy to help whoever buys it hook it up.