# FS: Matco Plasma cutter **URL:** \ **Category:** Classifieds\ **Created:** [April 5, 2009, 6:45pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325 "2009-04-05T18:45:13Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [April 5, 2009, 6:45pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/1 "2009-04-05T18:45:13Z")
I bought this about a year and ahalf ago. I bought it straight through Matco. I have used it a few times on some frame work thats it. All set to go with air regulator. Paid $2200 when new. Will take $1400 OBO for it. OR trade for a MIG or TIG welder, Oxy. Act torch setup. **_Matco 120 Volt Plasma Cutter - Plasma 25_ Portable inverter for compressed air plasma cutting. High quality cutting on all conductive materials including steel, stainless steel, aluminium, copper, brass, etc.** Features Inlcude: Lightweight. Low air and current consumption. Thermal protection. Safety system for incorrectly assembled torch for insufficient air pressure Digital control of air pressure with condensate filter. 10mm Severance Cut 8mm Genuine Cut Applications include: Plumbing Building Construction Light metal structures Car body work 8 bar pressure required 110 Volts 2 Year Warrenty ![http://i167.photobucket.com/albums/u147/reckone518/forsale/DSC04779.jpg](http://i167.photobucket.com/albums/u147/reckone518/forsale/DSC04779.jpg) ---
**Author:** ![underboosted](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/underboosted/32/6424_2.png) [@underboosted](https://forums.speedlife.net/u/underboosted)\ **Post date:** [April 5, 2009, 7:03pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/2 "2009-04-05T19:03:41Z")
You are so gay. ---
**Author:** ![6SPD\_S4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/6spd_s4/32/6326_2.png) [@6SPD\_S4](https://forums.speedlife.net/u/6SPD_S4)\ **Post date:** [April 5, 2009, 7:18pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/3 "2009-04-05T19:18:02Z")
Sell this and buy me a tig! ---
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [April 5, 2009, 7:19pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/4 "2009-04-05T19:19:56Z")
Or you could do the same for me :excited ---
**Author:** ![6SPD\_S4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/6spd_s4/32/6326_2.png) [@6SPD\_S4](https://forums.speedlife.net/u/6SPD_S4)\ **Post date:** [April 5, 2009, 7:27pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/5 "2009-04-05T19:27:40Z")
Screw that. I’m building a 24x24 barn in the back yard. 12’ + tall too. Tall enough to accomodate a lift! ---
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [April 5, 2009, 7:28pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/6 "2009-04-05T19:28:18Z")
I hear that shit Lift’s FTW!!! Then I can come over to tig up my new 3" exhaust. ---
**Author:** ![6SPD\_S4](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/6spd_s4/32/6326_2.png) [@6SPD\_S4](https://forums.speedlife.net/u/6SPD_S4)\ **Post date:** [April 5, 2009, 7:31pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/7 "2009-04-05T19:31:57Z")
Hell yea. As long as i can drive the rex when shes done. Which will prolly be before my garage. ---
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [April 5, 2009, 7:34pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/8 "2009-04-05T19:34:05Z")
> [@IT/Excel/huge nerd](https://forums.speedlife.net/t/it-excel-huge-nerd/16704/9): > > Hell yea. As long as i can drive the rex when shes done. Which will prolly be before my garage. Can do. I am shooting for the end of May and she’s all done. ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [April 6, 2009, 8:50am UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/9 "2009-04-06T08:50:25Z")
I can’t find this model listed on their website anymore. Is it 120v? ---
**Author:** ![underboosted](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/underboosted/32/6424_2.png) [@underboosted](https://forums.speedlife.net/u/underboosted)\ **Post date:** [April 6, 2009, 1:26pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/10 "2009-04-06T13:26:05Z")
> [@Kan-Jam](https://forums.speedlife.net/t/kan-jam/16723/12): > > I can’t find this model listed on their website anymore. Is it 120v? Yes it is 120 ---
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [April 6, 2009, 2:12pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/11 "2009-04-06T14:12:38Z")
> [@Kan-Jam](https://forums.speedlife.net/t/kan-jam/16723/12): > > I can’t find this model listed on their website anymore. Is it 120v? It’s 120V. I tried looking for it as well on there site, but it’s not listed anymore. Heres what I found though. **_Matco 120 Volt Plasma Cutter - Plasma 25_ Portable inverter for compressed air plasma cutting. High quality cutting on all conductive materials including steel, stainless steel, aluminium, copper, brass, etc.** Features Inlcude: Lightweight. Low air and current consumption. Thermal protection. Safety system for incorrectly assembled torch for insufficient air pressure Digital control of air pressure with condensate filter. 10mm Severance Cut 8mm Genuine Cut **Applications include: Plumbing Building Construction Light metal structures Car body work 8 bar pressure required 110 Volts 2 Year Warrenty** ---
**Author:** ![Fn\_Skanks](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fn_skanks/32/6308_2.png) [@Fn\_Skanks](https://forums.speedlife.net/u/Fn_Skanks)\ **Post date:** [April 8, 2009, 6:29pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/12 "2009-04-08T18:29:01Z")
man i wish, i wish… free bump. ---
**Author:** ![cazwrx187](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cazwrx187/32/6388_2.png) [@cazwrx187](https://forums.speedlife.net/u/cazwrx187)\ **Post date:** [April 8, 2009, 6:29pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/13 "2009-04-08T18:29:55Z")
> [@Troopers ambushed](https://forums.speedlife.net/t/troopers-ambushed/16799/108): > > man i wish, i wish… free bump mike. Cuts through m3 shells like butta! ---
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [April 8, 2009, 6:41pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/14 "2009-04-08T18:41:14Z")
It definitly cuts right through Honda shells like butter! ![http://i167.photobucket.com/albums/u147/reckone518/plasma.jpg](http://i167.photobucket.com/albums/u147/reckone518/plasma.jpg) ---
**Author:** ![Fn\_Skanks](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fn_skanks/32/6308_2.png) [@Fn\_Skanks](https://forums.speedlife.net/u/Fn_Skanks)\ **Post date:** [April 8, 2009, 6:50pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/15 "2009-04-08T18:50:35Z")
> [@cazwrx187"](#): > > Cuts through m3 shells like butta! tell that to benny. he bought it. ---
**Author:** ![cazwrx187](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cazwrx187/32/6388_2.png) [@cazwrx187](https://forums.speedlife.net/u/cazwrx187)\ **Post date:** [April 9, 2009, 6:50am UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/16 "2009-04-09T06:50:12Z")
> [@Needed: forums for VW, Dodge, Mitsubishi, Honda, Mazda, Nissan, DSM & Subaru](https://forums.speedlife.net/t/needed-forums-for-vw-dodge-mitsubishi-honda-mazda-nissan-dsm-subaru/16845/5): > > tell that to benny. he bought it. :shifty ---
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [April 14, 2009, 8:17pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/17 "2009-04-14T20:17:05Z")
Bump for best offers, also open to trades. I need a set of wheels with tires 15-16" 4x100. ---
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [April 20, 2009, 7:20pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/18 "2009-04-20T19:20:01Z")
Any interest? lowball the shit out me I don’t care. I need to finish my car 🙂 ---
**Author:** ![Jammer](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jammer/32/6349_2.png) [@Jammer](https://forums.speedlife.net/u/Jammer)\ **Post date:** [April 20, 2009, 10:59pm UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/19 "2009-04-20T22:59:51Z")
$600 ---
**Author:** ![kramerbuccs24](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kramerbuccs24/32/6397_2.png) [@kramerbuccs24](https://forums.speedlife.net/u/kramerbuccs24)\ **Post date:** [April 21, 2009, 5:15am UTC](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325/20 "2009-04-21T05:15:45Z")
$54. cash in hand. let me know. [Next page](https://forums.speedlife.net/t/fs-matco-plasma-cutter/243325.md?page=2)