# FS: Miller Syncrowave 180SD TIG, add a helmet & gloves then go weld. **URL:** \ **Category:** Classifieds\ **Created:** [October 7, 2010, 12:27pm UTC](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929 "2010-10-07T12:27:45Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [October 7, 2010, 12:27pm UTC](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929/1 "2010-10-07T12:27:45Z")
[http://albany.craigslist.org/tls/1992363153.html](http://albany.craigslist.org/tls/1992363153.html) I purchased this 2 years ago from a shop that bought it brand new. When I got it total time on the machine was 32 Minutes! I check the clock on the machine last night and its at 5 hours, 298 cycles. I put a brand new Weld Craft WP17 torch kit on it, because I cross threaded the original body changing collets. I used it twice with the new torch. Paid $115. The machine has the Miller Runner kit installed on it with large wheels and casters, heavy duty bottle holder and chain with quick disconnect. Ground clamp is in perfect shape. Foot pedal is in great shape and works just fine. I will include brand new never used stick welding cables. If you buy it at my asking price I will include an upgraded ball type flow meter Victor 3525 for precise shielding gas flow worth around $150 itself. I will also throw in extra replacement cups, #6,7&8’s, 1/16, 3/32, 1/8 collet body kits, and a bunch of tungsten’s 1/16th’s, 3/32’s & 1/8th. I will give you a bunch of mild steel filler rod, aluminum rod and some stainless rod too. That would get you off to a great start and save you about $75 for consumables. I also have a 80cf bottle for mostly full with 100% argon. I own the bottle, its not leased. I would throw that in for $75. New and filled they are $150+. Refills are around $30 for argon in that bottle. Welder, new torch, extra consumables, assortment of filler rods and upgraded Victor flow meter I am asking $1250. $1325 with 80cf bottle or argon… just get a helmet and gloves and weld! Reason for selling, I am upgrading to a new Miller Dynasty TIG! ![https://post.craigslist.org/imagepreview/n/3m83o93p05O25U25R6aa68e0b00864e7512fb.jpg](https://post.craigslist.org/imagepreview/n/3m83o93p05O25U25R6aa68e0b00864e7512fb.jpg) ![https://post.craigslist.org/imagepreview/n/3k03oc3lc5O05V65X1aa6af9801913e8c1c0e.jpg](https://post.craigslist.org/imagepreview/n/3k03oc3lc5O05V65X1aa6af9801913e8c1c0e.jpg) ---
**Author:** ![toomanycamaros](https://avatars.discourse-cdn.com/v4/letter/t/7993a0/32.png) [@toomanycamaros](https://forums.speedlife.net/u/toomanycamaros)\ **Post date:** [October 7, 2010, 8:09pm UTC](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929/2 "2010-10-07T20:09:26Z")
i have a friend in the market for a TIG what thickens metal can this weld and does it have a high frequency box? ---
**Author:** ![20wrx09](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/20wrx09/32/6532_2.png) [@20wrx09](https://forums.speedlife.net/u/20wrx09)\ **Post date:** [October 7, 2010, 8:19pm UTC](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929/3 "2010-10-07T20:19:09Z")
you really love the one at ASS that much :rofl . sucha homooo hhahha jk GLWS ---
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [October 7, 2010, 10:35pm UTC](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929/4 "2010-10-07T22:35:46Z")
Any interest in trading for a Matco plasma cutter? ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [October 8, 2010, 10:48am UTC](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929/5 "2010-10-08T10:48:30Z")
> [@programs to rip a dvd to your computer?](https://forums.speedlife.net/t/programs-to-rip-a-dvd-to-your-computer/35600/20): > > i have a friend in the market for a TIG what thickens metal can this weld and does it have a high frequency box? its a 180amp unit, its rated at 1/4" steel/aluminum. but I did some 3/8 steel with a 1/8" tungsten and it was fine. aluminum it will get up there around 3/8" or so if you preheat the shit out of it. Its got some balls IMO. I used the 165 unit ASS has when i put a 1/2" plate onto 1/4" plenum for my intake. I maxed it out and preheated it with a torch and it was penetrating just fine I would say. so the 180amps would be just fine. > [@Easily, the most infuriatingly annoying game in awhile.](https://forums.speedlife.net/t/easily-the-most-infuriatingly-annoying-game-in-awhile/35637/11): > > you really love the one at ASS that much :rofl . sucha homooo hhahha > jk > GLWS Yep, told you I was going to list it! > [@BTC?](https://forums.speedlife.net/t/btc/30643/67): > > Any interest in trading for a Matco plasma cutter? Neg… I picked up a Hypertherm 380 a few months back… thx anyways. ---
**Author:** ![Mafdark](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mafdark/32/6322_2.png) [@Mafdark](https://forums.speedlife.net/u/Mafdark)\ **Post date:** [October 8, 2010, 11:41am UTC](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929/6 "2010-10-08T11:41:30Z")
> [@BTC?](https://forums.speedlife.net/t/btc/30643/67): > > Any interest in trading for a Matco plasma cutter? how much outright? 🙂 ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [October 8, 2010, 12:09pm UTC](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929/7 "2010-10-08T12:09:02Z")
> [@Why is everyone selling their turbos hondas?](https://forums.speedlife.net/t/why-is-everyone-selling-their-turbos-hondas/35662/16): > > how much outright? 🙂 Yeah buy that… hes been trying to sell it for a while. :thumbup ---
**Author:** ![LKSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lksi/32/6316_2.png) [@LKSi](https://forums.speedlife.net/u/LKSi)\ **Post date:** [October 8, 2010, 12:14pm UTC](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929/8 "2010-10-08T12:14:20Z")
ughh want this bad… Neg on the price what so ever? ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [October 8, 2010, 12:33pm UTC](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929/9 "2010-10-08T12:33:55Z")
$1150 without the flow meter, just the normal regulator? ---
**Author:** ![Reckone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reckone/32/6324_2.png) [@Reckone](https://forums.speedlife.net/u/Reckone)\ **Post date:** [October 8, 2010, 3:00pm UTC](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929/10 "2010-10-08T15:00:44Z")
> [@Why is everyone selling their turbos hondas?](https://forums.speedlife.net/t/why-is-everyone-selling-their-turbos-hondas/35662/16): > > how much outright? 🙂 The lowest I will go is $800 on it. PM me if interested, also taking partial trades for a MIG welder. Sorry for the thread jack Mike. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [October 12, 2010, 6:47am UTC](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929/11 "2010-10-12T06:47:04Z")
> [@M & M Junkyard? retarded or just plain dumb](https://forums.speedlife.net/t/m-m-junkyard-retarded-or-just-plain-dumb/35644/32): > > The lowest I will go is $800 on it. PM me if interested, also taking partial trades for a MIG welder. > > Sorry for the thread jack Mike. No prob homie. :thumbup ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [October 18, 2010, 12:24pm UTC](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929/12 "2010-10-18T12:24:10Z")
trash bin this… shits sold. Now i gotta find another machine.