# FS: Miller Syncrowave 180SD TIG, add a helmet & gloves then go weld. **URL:** \ **Category:** Classifieds\ **Created:** [October 7, 2010, 12:27pm UTC](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929 "2010-10-07T12:27:45Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [October 8, 2010, 10:48am UTC](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929/5 "2010-10-08T10:48:30Z")
> [@programs to rip a dvd to your computer?](https://forums.speedlife.net/t/programs-to-rip-a-dvd-to-your-computer/35600/20): > > i have a friend in the market for a TIG what thickens metal can this weld and does it have a high frequency box? its a 180amp unit, its rated at 1/4" steel/aluminum. but I did some 3/8 steel with a 1/8" tungsten and it was fine. aluminum it will get up there around 3/8" or so if you preheat the shit out of it. Its got some balls IMO. I used the 165 unit ASS has when i put a 1/2" plate onto 1/4" plenum for my intake. I maxed it out and preheated it with a torch and it was penetrating just fine I would say. so the 180amps would be just fine. > [@Easily, the most infuriatingly annoying game in awhile.](https://forums.speedlife.net/t/easily-the-most-infuriatingly-annoying-game-in-awhile/35637/11): > > you really love the one at ASS that much :rofl . sucha homooo hhahha > jk > GLWS Yep, told you I was going to list it! > [@BTC?](https://forums.speedlife.net/t/btc/30643/67): > > Any interest in trading for a Matco plasma cutter? Neg… I picked up a Hypertherm 380 a few months back… thx anyways. --- _[View the full topic](https://forums.speedlife.net/t/fs-miller-syncrowave-180sd-tig-add-a-helmet-gloves-then-go-weld/254929)._